1 Scope and object
2 Normative references
3 Definitions and abbreviations
   3.1 Definitions
   3.2 Abbreviations
4 Requirements
5 Classification of equipment
6 Measurements
   6.1 General
   6.2 Different Types of EUT
   6.3 Measurement procedure
7 Equipment documentation
8 Applicability
9 Test report
10 Compliance with this publication
11 Measurement instrumentation uncertainty
Annex A (Normative) - Requirements
   A.1 General
   A.2 Requirements for radiated emission from the enclosure
       port
       A.2.1 Relaxations for radiated emission requirements
             for specific equipment
   A.3 Requirements for conducted emissions
       A.3.1 Requirements applicable to the AC mains power
             port
       A.3.2 Requirements applicable to other ports
Annex B (Normative) - Exercising of the EUT during the
        measurement and specification of test signals
   B.1 Introduction
   B.2 Exercising of EUT ports
       B.2.1 Audio signals
       B.2.2 Video signals
       B.2.3 Other signals
Annex C (Normative) - Measurement procedures, instrumentation
        and supporting information
   C.1 Instrumentation and supporting information
        C.1.1 General
        C.1.2 Basic standard reference, CISPR16
              C.1.2.1 Antennas for radiated emissions measurements
              C.1.2.2 Ambients
              C.1.2.3 Boundary of the EUT and measurement distance
                      for radiated emissions measurements
        C.1.3 Basic standard reference, for other specifications
   C.2 General measurement procedures
        C.2.1 Overview
        C.2.2 Prescan Measurements
        C.2.3 Formal Measurements
        C.2.4 Specifics for radiated emission measurements
              C.2.4.1 Prescan Measurements
              C.2.4.2 Formal Measurements
        C.2.5 Specifics for conducted emission measurements on
              the AC mains power ports
        C.2.6 Specifics for conducted emissions on wired network
              ports
        C.2.7 Specifics for conducted emissions on RF input/output
              ports
        C.2.8 Specifics for conducted emissions on the broadcast
              receiver tuner port
        C.2.9 Specifics for the conducted emission measurements
              on the RF modulator output port
   C.3 Specific measurement procedures
        C.3.1 Screened or unscreened wired network port
              C.3.1.1 Characteristics of AAN
              C.3.1.2 Characteristics of current probe
              C.3.1.3 Characteristics of voltage probe
              C.3.1.4 Measurement procedures for common mode
                      measurements
              C.3.1.5 Measurement of cable, ferrite and AE common
                      mode impedance
        C.3.2 Measurement of emission voltage at a TV/FM broadcast
              receiver tuner port in the frequency range 30 MHZ
              to 2,15 GHz
              C.3.2.1 General
              C.3.2.2 Measurement at coaxial TV/FM broadcast
                      receiver tuner ports
              C.3.2.3 Presentation of the results
        C.3.3 Measurement of the wanted signal and emission
              voltage at an RF modulator output port, in the
              frequency range 30 MHz to 2,15 GHz
              C.3.3.1 General
              C.3.3.2 Measurement procedure
        C.3.4 Measurement of local oscillator leakage from
              outdoor units of broadcast satellite
              receivers
        C.3.5 Additional Normalized Site Attenuation (NSA) figures
Annex D (Normative) - Arrangement of EUT and AE
   D.1 General
        D.1.1 Tabletop arrangement
        D.1.2 Floor-standing arrangement
        D.1.3 Combinations of tabletop and floor-standing EUT
              arrangement
   D.2 Specific conditions for conducted emission measurement
        D.2.1 General
        D.2.2 Specific conditions for table top equipment
        D.2.3 Specific requirements for floor standing equipment
        D.2.4 Specific requirements for combined tabletop and floor
              standing equipment
   D.3 Specific requirements for radiated measurement in an
        FSOATS, OATS, SAC
        D.3.1 General
        D.3.2 Specific requirements for tabletop equipment
   D.4 Specific requirements for radiated measurement in a FAR
   D.5 Outdoor units of broadcast satellite receivers
        D.5.1 EUT arrangements
Annex E (Informative) - Guidance for emission measurements using
        CISPR 16 methods
   E.1 General
   E.2 Basic measurements: automated
   E.3 Prescan measurements: automated
   E.4 Manual Measurements
   E.5 Formal measurements
Annex F (Informative) - Test report contents summary
Annex G (Informative) - Support Information for the measurement
        procedures defined in Clause C.3.1
   G.1 Schematic diagrams of examples of asymmetric artificial
        networks
        G.1.1 Rationale for emission measurements and procedures
              on wired network ports
              G.1.1.1 Limits
              G.1.1.2 Combination of current probe and capacitive
                      voltage probe
              G.1.1.3 Basic ideas of the capacitive voltage probe
              G.1.1.4 Combination of current and voltage limit
              G.1.1.5 Ferrite requirements for use in clause C.3.1
              G.1.1.6 Bibliography for clause G.1.1
Annex H (Informative) - Alternative test methods with limits for the
        enclosure port
   H.1 Introduction
   H.2 Requirements for radiated emission from the enclosure port
        using an GTEM and RVC
   H.3 Additional measurement procedure information
        H.3.1 Introduction
        H.3.2 Specifics for radiated emission measurements using
              a GTEM
        H.3.3 Specifics for radiated emission measurements using
              an RVC
   H.4 Use of GTEM for radiated emission measurements
        H.4.1 Introduction
        H.4.2 GTEM Dimension
        H.4.3 EUT layout
        H.4.4 GTEM, measurements above 1 GHz
        H.4.5 Uncertainties
        H.4.6 References for section H.4
   H.5 Specific EUT arrangement requirements for radiated
        emission measurements above 1 GHz using a RVC
Annex I (Informative) - Supporting information for the measurement
        of Outdoor units broadcast satellite receivers
   I.1 General
        I.1.1 Local oscillator leakage radiated from the antenna
              within +/- 7 degree of the main beam axis
              I.1.1.1 Direct method (without parabola antenna)
              I.1.1.2 Radiated field measurement
        I.1.2 Local oscillator leakage radiated from the antenna
              other than +/- 7 degree of the main beam axis
   I.2 EUT arrangements
Annex J (Informative) - Screening effectiveness measurement method
        for receivers
        J.1.1 Screening effectiveness (or CATV-signal leakage)
              measurement for receivers
              J.1.1.1 Background
              J.1.1.2 Requirements and measurements
              J.1.1.3 Measurement method
              J.1.1.4 References for section Annex J