09/30175684 DC : 0

Superseded

View Superseded by

BS EN 14673:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS

Available format(s)

Hardcopy , PDF

Superseded date

05-31-2010

Language(s)

English

Publisher

British Standards Institution

Foreword
1 Modification to the "Foreword"
2 Modification to Clause "2 Normative references"
3 Modification to "5.1.4 Safety layout"
4 Modification to "5.1.6 Railings"
5 Modification to "5.1.9 Warning devices and safety signs"
6 Modification to "5.1.11 Electrical equipment"
7 Modification to "5.1.13 Guards"
8 Modification to "5.1.14 Surface temperatures"
9 Modifications to "5.1.16 Hydraulic and pneumatic systems"
   and 5.1.17 Ergonomics"
10 Addition of "5.1.18 Vibrations", "5.1.19 Loss of energy"
   and "5.1.20 Linked equipment"
11 Modification to Table 1, "5.2.1.1 Mechanical hazards"
12 Modifications to Table 1, "5.2.1.2 Noise"
13 Modification to Table 1, "5.2.1.5 [new numbering] Hazards
   due to materials and substances"
14 Modification to Table 1, "5.2.1.6 [new numbering] Ergonomic
   hazards"
15 Modification to Table 1, "5.2.1.9 [new numbering] Thermal
   hazards"
16 Modification to "7.1 General"
17 Modifications to "7.4 Marking"
18 Modifications to "7.5.3 Instructions about transportation and
   installation"
19 Modifications to Annex B
20 Modifications to Annex C
21 Addition of Annex ZB
22 Modification to the Bibliography

BS EN 14673:2006/A1

Committee	MCE/23
DocumentType	Draft
Pages	15
PublisherName	British Standards Institution
Status	Superseded
SupersededBy	BS EN 14673 : 2006

EN 12096:1997	Mechanical vibration - Declaration and verification of vibration emission values
ISO 11200:2014	Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
ISO 4871:1996	Acoustics — Declaration and verification of noise emission values of machinery and equipment
EN 14253:2003+A1:2007	Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance
ISO 11546-2:1995	Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes)
EN 60825-1:2014/AC:2017-06	SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
IEC 60073:2002	Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
EN 60073:2002	Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
EN 614-2:2000+A1:2008	Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
EN ISO 14121-1:2007	Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007)
EN 1837:1999+A1:2009	Safety of machinery - Integral lighting of machines
EN 13861:2011	Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
EN ISO 13850:2015	Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
IEC 60825-1:2014	Safety of laser products - Part 1: Equipment classification and requirements
ISO 3740:2000	Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards
EN ISO 11820 : 1996	ACOUSTICS - MEASUREMENTS ON SILENCERS IN SITU
EN ISO 13857:2008	Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
EN ISO 11688-2 : 2000	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
ISO 14121-1:2007	Safety of machinery Risk assessment Part 1: Principles
EN ISO 11200:2014	Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
ISO 11820:1996	Acoustics — Measurements on silencers in situ
EN ISO 11546-2:2009	Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
EN 60447:2004	Basic and safety principles for man-machine interface, marking and identification - Actuating principles
EN ISO 3740:2000	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
ISO 13857:2008	Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 11203:1995	Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
EN ISO 6682:2008	Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)
EN 12198-3:2002+A1:2008	Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening
EN ISO 13849-1:2015	Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
ISO 13850:2015	Safety of machinery Emergency stop function Principles for design
EN ISO 4871:2009	Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
ISO 11546-1:1995	Acoustics Determination of sound insulation performances of enclosures Part 1: Measurements under laboratory conditions (for declaration purposes)
EN 50171 : 2001 COR 2001	CENTRAL POWER SUPPLY SYSTEMS
EN ISO 11691:2009	Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995)
EN ISO 11821 : 1997	ACOUSTICS - MEASUREMENT OF THE IN SITU SOUND ATTENUATION OF A REMOVABLE SCREEN
EN ISO 11546-1:2009	Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
ISO 13849-1:2015	Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO/TR 11688-2:1998	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
EN ISO 11203:2009	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
ISO 11691:1995	Acoustics Measurement of insertion loss of ducted silencers without flow Laboratory survey method