10/30168896 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
11-30-2010
English
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Materials and components
6 Design
7 Lintels: method of assessment of load
8 Work on site
Bibliography
Committee |
B/525/6
|
DocumentType |
Draft
|
Pages |
118
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
BS EN 13914-1:2016 | Design, preparation and application of external rendering and internal plastering External rendering |
BS EN 771-5 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 5: MANUFACTURED STONE MASONRY UNITS |
BS EN 15287-1 : 2007 | CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES |
BS 5977-2:1983 | Lintels Specification for prefabricated lintels |
BS EN 771-3 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 3: AGGREGATE CONCRETE MASONRY UNITS (DENSE AND LIGHTWEIGHT AGGREGATES) |
BS EN 13139:2013 | Aggregates for mortar |
BS EN 988:1997 | Zinc and zinc alloys. Specification for rolled flat products for building |
BS EN 13162 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
BS DD86-1(1983) : 1983 | DAMP-PROOF COURSES - METHODS OF TEST FOR FLEXURAL BOND STRENGTH AND SHORT TERM SHEAR STRENGTH |
BS EN 13167 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
BS EN 1996-1-2:2005 | Eurocode 6. Design of masonry structures General rules. Structural fire design |
BS EN 845-2 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
BS EN 13164 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
BS 4486:1980 | Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete |
BS DD86-2(1984) : 1984 | DAMP-PROOF COURSES - METHOD OF TEST FOR CREEP DEFORMATION |
BS EN ISO 11600 : 2003 | BUILDING CONSTRUCTION - JOINTING PRODUCTS - CLASSIFICATION AND REQUIREMENTS FOR SEALANTS |
BS EN 934-3 : 2009 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING |
BS EN 845-3 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 3: BED JOINT REINFORCEMENT OF STEEL ESHWORK |
BS 8104:1992 | Code of practice for assessing exposure of walls to wind-driven rain |
BS EN 206-1:2000 | Concrete Specification, performance, production and conformity |
BS EN 1052-1:1999 | Methods of test for masonry Determination of compressive strength |
BS 6515:1984 | Specification for polyethylene damp-proof courses for masonry |
BS EN 13165 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION |
BS EN 1996-3:2006 | Eurocode 6. Design of masonry structures Simplified calculation methods for unreinforced masonry structures |
BS EN 1992-1-1 : 2004 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
BS EN 12620:2013 | Aggregates for concrete |
BS EN 459-1:2015 | Building lime Definitions, specifications and conformity criteria |
BS 5642-1(1978) : 1978 | SILLS, COPINGS AND CAPPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
BS 5896:1980 | Specification for high tensile steel wire and strand for the prestressing of concrete |
BS EN 12588:2006 | Lead and lead alloys. Rolled lead sheet for building purposes |
BS EN 771-2 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 2: CALCIUM SILICATE MASONRY UNITS |
BS 7456:1991 | Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems |
BS 5617:1985 | Specification for urea-formaldehyde (UF) foam systems suitable for thermal insulation of cavity walls with masonry or concrete inner and outer leaves |
BS EN 1652:1998 | Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
BS EN 1996-2:2006 | Eurocode 6. Design of masonry structures Design considerations, selection of materials and execution of masonry |
BS 8215:1991 | Code of practice for design and installation of damp-proof courses in masonry construction |
BS EN 13163 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED POLYSTYRENE (EPS) PRODUCTS - SPECIFICATION |
BS EN 573-3:2013 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
BS 8000-16(1997) : 1997 | WORKMANSHIP ON BUILDING SITES - PART 16: CODE OF PRACTICE FOR SEALING JOINTS IN BUILDINGS USING SEALANTS |
BS EN 942:2007 | Timber in joinery. General requirements |
BS EN 490 : 2011 | CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - PRODUCT SPECIFICATIONS |
BS EN 1304:2013 | Clay roofing tiles and fittings. Product definitions and specifications |
BS EN 515:2017 | Aluminium and aluminium alloys. Wrought products. Temper designations |
BS EN 485-2:2013 | Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
BS 1186-3:1990 | Timber for and workmanship in joinery Specification for wood trim and its fixing |
BS 5646-2:1978 | Rolling bearings. Accessories Specification for locknuts, wide series, and lockwashers with bent inner tab |
BS 6398:1983 | Specification for bitumen damp-proof courses for masonry |
BS 743:1970 | Specification for materials for damp-proof courses |
BS EN 1996-1-1 : 2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
BS EN 845-1 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS EN 13166 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
BS EN 1172:2011 | Copper and copper alloys. Sheet and strip for building purposes |
BS DD86-3(1990) : 1990 | DAMP-PROOF COURSES - GUIDE TO CHARACTERISTIC STRENGTHS OF DAMP-PROOF COURSE MATERIAL USED IN MASONRY |
BS EN 1990:2002+A1:2005 | Eurocode. Basis of structural design |
BS 5618:1985 | Code of practice for thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with urea-formaldehyde (UF) foam systems |
BS EN 14411:2012 | Ceramic tiles. Definitions, classification, characteristics, evaluation of conformity and marking |
BS EN 771-1 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 1: CLAY MASONRY UNITS |
BS EN 771-6 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS |
BS 6925:1988 | Specification for mastic asphalt for building and civil engineering (limestone aggregate) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.