• There are no items in your cart

11/30215604 DC : 0

Current
Current

The latest, up-to-date edition.

BS IEC 60913 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
Available format(s)

Hardcopy , PDF

Language(s)

English

1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviated
  terms
4 Fundamental design data
5 System requirements
6 Structures
7 Component requirements
8 Testing
9 Minimum documentation
Annex A (informative) - Current carrying capacity
        of conductors
Annex B (informative) - Structural details
Annex C (informative) - Information on geotechnical
        soil investigation and soil characteristics
Annex D (informative) - Information on Uniformity
        of Elasticity of OCL within a span length
Annex E (normative) - Special national conditions
Bibliography

BS IEC 60913

Committee
GEL/9
DocumentType
Draft
Pages
98
PublisherName
British Standards Institution
Status
Current

UIC 606-1 : 1987 AMD 1 CONSEQUENCES OF THE APPLICATION OF THE KINEMATIC GAUGES DEFINED BY UIC LEAFLETS IN THE 505 SERIES ON THE DESIGN OF THE CONTACT LINES
EN 50189:2000 Conductors for overhead lines - Zinc coated steel wires
EN 12465 : 2001 WOOD POLES FOR OVERHEAD LINES - DURABILITY REQUIREMENTS
ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
IEC 61325:1995 Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria
ISO 22476-2:2005 Geotechnical investigation and testing Field testing Part 2: Dynamic probing
EN 485-1:2016 Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
EN 755-1:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
EN 12843 : 2004 PRECAST CONCRETE PRODUCTS - MASTS AND POLES
ISO 10721-1:1997 Steel structures — Part 1: Materials and design
IEC 60826:2017 Design criteria of overhead transmission lines
EN 50326 : 2002 Conductors for overhead lines - Characteristics of greases
UIC 606-2 : 4ED 1986 INSTALLATION OF 25 KV AND 50 OR 60 HZ OVERHEAD CONTACT LINES
IEC 62128-1:2013 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
IEC 60050-811:1991 International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
EN 1991-2:2003/AC:2010 EUROCODE 1: ACTIONS ON STRUCTURES - PART 2: TRAFFIC LOADS ON BRIDGES
IEC 61992-7-1:2006 Railway applications - Fixed installations - DC switchgear - Part 7-1: Measurement, control and protection devices for specific use in d.c. traction systems - Application guide
IEC 60305:1995 Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type
EN 50318:2002 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line
CLC/TS 50502:2008 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and connection systems
EN 1536:2010+A1:2015 Execution of special geotechnical work - Bored piles
EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
IEC 60099-4:2014 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
ISO 14688-1:2002 Geotechnical investigation and testing Identification and classification of soil Part 1: Identification and description
IEC 61992-7-2:2006 Railway applications - Fixed installations - DC switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices
ISO/TR 11069:1995 Aluminium structures — Material and design — Ultimate limit state under static loading
IEC 61992-3:2006+AMD1:2015 CSV Railway applications - Fixed installations - DC switchgear - Part 3:Indoor d.c. disconnectors, switch-disconnectors and earthing switches
IEC 61992-5:2006 Railway applications - Fixed installations - DC switchgear - Part 5: Surge arresters and low-voltage limiters for specific use in d.c. systems
ISO 4354:2009 Wind actions on structures
IEC 60494-1:2013 Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 1: Pantographs for main line vehicles
IEC 60383-1:1993 Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria
SAC GB/T 1179 : 1999 ROUND WIRE CONCENTRIC LAY OVERHEAD ELECTRICAL STRANDED CONDUCTORS
UIC 608 : 3ED 2003 CONDITIONS TO BE COMPLIED WITH FOR THE PANTOGRAPHS OF TRACTIVE UNITS USED IN INTERNATIONAL SERVICES
UIC 505-5 : 3ED 2010 HISTORY, JUSTIFICATION AND COMMENTARIES ON THE ELABORATION AND DEVELOPMENT OF UIC LEAFLETS OF THE SERIES 505 AND 506 ON GAUGES
UIC 505-1 : 10ED 2006 RAILWAY TRANSPORT STOCK - ROLLING STOCK CONSTRUCTION GAUGE
IEC 61109:2008 Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
IEC 60672-3:1997 Ceramic and glass-insulating materials - Part 3: Specifications for individual materials
IEC 60660:1999 Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
EN 50183:2000 Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires
EN 20898-2 : 1993 MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992)
IEC 60850:2014 Railway applications - Supply voltages of traction systems
EN 50317:2012/AC:2012 RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - REQUIREMENTS FOR AND VALIDATION OF MEASUREMENTS OF THE DYNAMIC INTERACTION BETWEEN PANTOGRAPH AND OVERHEAD CONTACT LINE
IEC 61952:2008 Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
ISO 22475-1:2006 Geotechnical investigation and testing Sampling methods and groundwater measurements Part 1: Technical principles for execution
IEC 61992-4:2006+AMD1:2015 CSV Railway applications - Fixed installations - DC switchgear - Part 4:Outdoor d.c. disconnectors, switch-disconnectors and earthing switches
ISO 14689-1:2003 Geotechnical investigation and testing Identification and classification of rock Part 1: Identification and description
EN 12510:2001/AC:2002 WOOD POLES FOR OVERHEAD LINES - STRENGTH GRADING CRITERIA
IEC 62236-2:2008 Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world
EN 12479 : 2001 WOOD POLES FOR OVERHEAD LINES - SIZES - METHODS OF MEASUREMENT AND PERMISSIBLE DEVIATIONS
ISO 10721-2:1999 Steel structures — Part 2: Fabrication and erection
IEC 60889:1987 Hard-drawn aluminium wire for overhead line conductors
ISO 22476-3:2005 Geotechnical investigation and testing Field testing Part 3: Standard penetration test
ISO 14688-2:2004 Geotechnical investigation and testing Identification and classification of soil Part 2: Principles for a classification
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC TS 61245:2015 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems
IEC 60273:1990 Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V
IEC 60099-1:1991+AMD1:1999 CSV Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems
IEC 61992-2:2006+AMD1:2014 CSV Railway applications - Fixed installations - DC switchgear - Part 2:DC circuit-breakers
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
EN 50345:2009 Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines
ISO 657-14:2000 Hot-rolled steel sections Part 14: Hot-finished structural hollow sections Dimensions and sectional properties
IEC 62128-2:2013 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the effects of stray currents caused by d.c. traction systems
EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
EN 1997-2:2007/AC:2010 EUROCODE 7 - GEOTECHNICAL DESIGN - PART 2: GROUND INVESTIGATION AND TESTING
IEC 62505-2:2016 Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 2: Disconnectors, earthing switches and switches with nominal voltage above 1 kV
ENV 1991-2-4 : 1995 EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS ON STRUCTURES - WIND ACTIONS (TOGETHER WITH UNITED KINGDOM NATIONAL APPLICATION DOCUMENT)
IEC 62497-2:2010 Railway applications - Insulation coordination - Part 2: Overvoltages and related protection
IEC 60099-5:2013 Surge arresters - Part 5: Selection and application recommendations
IEC 60652:2002 Loading tests on overhead line structures
UIC 791 : 2ED 1990 QUALITY ASSURANCE OF OVERHEAD LINE EQUIPMENT
IEC 60672-2:1999 Ceramic and glass insulating materials - Part 2: Methods of test
EN 50182:2001/AC:2013 CONDUCTORS FOR OVERHEAD LINES - ROUND WIRE CONCENTRIC LAY STRANDED CONDUCTORS
EN 12509 : 2001 TIMBER POLES FOR OVERHEAD LINES - TEST METHODS - DETERMINATION OF MODULUS OF ELASTICITY, BENDING STRENGTH, DENSITY AND MOISTURE CONTENT
UIC 794 : 1ED 1996 PANTOGRAPH-OVERHEAD LINE INTERACTION ON THE EUROPEAN HIGH-SPEED NETWORK
EN 206-1:2000/A2:2005 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
IEC 60071-2:1996 Insulation co-ordination - Part 2: Application guide
IEC 61992-1:2006+AMD1:2014 CSV Railway applications - Fixed installations - DC switchgear - Part 1:General
IEC 62497-1:2010+AMD1:2013 CSV Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electricaland electronic equipment
EN 1997-1:2004/A1:2013 EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
IEC 61232:1993 Aluminium-clad steel wires for electrical purposes
IEC 60433:1998 Insulators for overhead lines with a nominal voltage above 1 000 V - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type
EN 50149:2012 Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires
IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
IEC 62486:2017 Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead contactline (to achieve free access)
UIC 505-4 : 4ED 2007 EFFECTS OF THE APPLICATION OF THE KINEMATIC GAUGES DEFINED IN THE 505 SERIES OF LEAFLETS ON THE POSITIONING OF STRUCTURES IN RELATION TO THE TRACKS AND OF THE TRACKS IN RELATION TO EACH OTHER
IEC 60071-1:2006+AMD1:2010 CSV Insulation co-ordination - Part 1: Definitions, principles and rules
EN 1990:2002/A1:2005/AC:2010 EUROCODE - BASIS OF STRUCTURAL DESIGN
EN 1537:2013 Execution of special geotechnical works - Ground anchors
EN 1991-1-4:2005/A1:2010 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS
IEC 62498-2:2010 Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations
UIC 600 : 4ED 2003 ELECTRIC TRACTION WITH AERIAL CONTACT LINE
ISO 22966:2009 Execution of concrete structures
EN 12511 : 2001 WOOD POLES FOR OVERHEAD LINES - DETERMINATION OF CHARACTERISTIC VALUES
ISO 16160:2012 Hot-rolled steel sheet products — Dimensional and shape tolerances
IEC 61992-7-3:2006 Railway applications - Fixed installations - DC switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices
IEC 61992-6:2006+AMD1:2014 CSV Railway applications - Fixed installations - DC switchgear - Part 6:DC switchgear assemblies
ISO 630-2:2011 Structural steels Part 2: Technical delivery conditions for structural steels for general purposes
IEC 60383-2:1993 Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria
IEC 62621:2011 Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems
ISO 23469:2005 Bases for design of structures Seismic actions for designing geotechnical works
EN 12699:2015 Execution of special geotechnical works - Displacement piles
EN 755-2:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
IEC 62271-102:2001+AMD1:2011+AMD2:2013 CSV High-voltage switchgear and controlgear - Part 102: Alternatingcurrent disconnectors and earthing switches
EN 1993-1-1:2005/A1:2014 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
IEC 60168:1994+AMD1:1997+AMD2:2000 CSV Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
IEC 60672-1:1995 Ceramic and glass insulating materials - Part 1: Definitions and classification

View more information
US$23.96
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.