• There are no items in your cart

11/30239473 DC : 0

Current
Current

The latest, up-to-date edition.

BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
Available format(s)

Hardcopy , PDF

Language(s)

English

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
5 Information to be supplied by the purchaser
6 Manufacturing process
7 Requirements
8 Inspection
9 Preparation of samples and test pieces
10 Test methods
11 Marking, labelling, packaging
12 Complaints
13 Options
14 Evaluation of conformity
Annex A (normative) - Location of samples and
        test pieces
Annex B (normative) - Evaluation of conformity
Annex ZA (informative) - Clauses of this European
         Standard addressing the provisions of
         the EU Construction Products Directive
Bibliography

BS EN 10025-1

Committee
ISE/103
DocumentType
Draft
Pages
35
PublisherName
British Standards Institution
Status
Current

Standards Relationship
PREN 10025-1 : DRAFT 2011 Identical

EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
EN 10293:2015 Steel castings - Steel castings for general engineering uses
EN 10162:2003 Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
EN 10048:1996 Hot rolled narrow steel strip - Tolerances on dimensions and shape
EN 10051:2010 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 10079:2007 Definition of steel products
PREN 10025-6 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN QUENCHED AND TEMPERED CONDITIONS
EN 10149-1:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition
EN 10221:1995 Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EN 10268:2006+A1:2013 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10056-2:1993 Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions
EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
EN 10279:2000 Hot rolled steel channels - Tolerances on shape, dimensions and mass
PREN 10025-2 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
EN 10149-2:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels
EN 10034:1993 Structural steel I and H sections - Tolerances on shape and dimensions
EN 10248-1:1995 Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions
EN 10277-2:2008 Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes
EN 10168:2004 Steel products - Inspection documents - List of information and description
EN ISO 2566-1:1999 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
ISO 17642-3:2005 Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 3: Externally loaded tests
EN 10024:1995 Hot rolled taper flange I sections - Tolerances on shape and dimensions
EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 1011-2:2001/A1:2003 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
EN 10308:2001 Non destructive testing - Ultrasonic testing of steel bars
EN 10306:2001 Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams
EN 10163-2:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
EN 10163-1:2004/AC:2007 DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS
EN 10060:2003 Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 10021:2006 General technical delivery conditions for steel products
EN 10017:2004 Steel rod for drawing and/or cold rolling - Dimensions and tolerances
ISO 2566-1:1984 Steel Conversion of elongation values Part 1: Carbon and low alloy steels
EN 10250-2:1999 Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels
EN ISO 17642-1:2004 Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17642-1:2004)
EN 10163-3:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections
EN 10204:2004 Metallic products - Types of inspection documents
PREN 10025-3 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
ISO 9001:2015 Quality management systems — Requirements
ISO 643:2012 Steels Micrographic determination of the apparent grain size
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
ISO 17642-1:2004 Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 1: General
EN 10225:2009 Weldable structural steels for fixed offshore structures - Technical delivery conditions
EN ISO 17642-3:2005 Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005)
EN 10020:2000 Definition and classification of grades of steel
EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 10061:2003 Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10059:2003 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
CEN/TR 10347:2006 Guidance for forming of structural steels in processing
PREN 10025-4 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
EN ISO 17642-2:2005 Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17642-2:2005)
EN 10055:1995 Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
EN 10249-1:1995 Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
EN 10067:1996 Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass
ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
EN 10149-3:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels
ISO 17642-2:2005 Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 2: Self-restraint tests
PREN 10025-5 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE

View more information
US$23.96
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.