CEN Guide 414:2017
|
Safety of machinery - Rules for the drafting and presentation of safety standards
|
ISO 7176-10:2008
|
Wheelchairs — Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs
|
EN 1915-3:2004+A1:2009
|
Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction
|
ISO 14122-3:2016
|
Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
|
ISO 10542-1:2012
|
Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 1: Requirements and test methods for all systems
|
EN ISO 9999:2016
|
Assistive products for persons with disability - Classification and terminology (ISO 9999:2016)
|
ISO 7176-2:2017
|
Wheelchairs — Part 2: Determination of dynamic stability of electrically powered wheelchairs
|
SAE ARP 5140 : 2014
|
DESIGN CRITERIA FOR LIFTS USED TO BOARD PASSENGERS WITH MOBILITY IMPAIRMENTS ONTO AIRCRAFT WITH DOORSILL HEIGHTS OF 144 IN OR LESS
|
IEC 60601-1:2005+AMD1:2012 CSV
|
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
|
ISO 7193:1985
|
Wheelchairs Maximum overall dimensions
|
ISO 7176-15:1996
|
Wheelchairs — Part 15: Requirements for information disclosure, documentation and labelling
|
EN 1837:1999+A1:2009
|
Safety of machinery - Integral lighting of machines
|
ISO 16004:2017
|
Aircraft ground equipment — Passenger boarding bridge or transfer vehicle — Interface requirements with aircraft doors
|
ISO 10542-3:2005
|
Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 3: Docking-type tiedown systems
|
ISO 7176-1:2014
|
Wheelchairs Part 1: Determination of static stability
|
EN 1175-1:1998+A1:2010
|
Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
|
ISO 7176-16:2012
|
Wheelchairs Part 16: Resistance to ignition of postural support devices
|
EN ISO 13857:2008
|
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
|
EN 1915-4:2004+A1:2009
|
Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction
|
ISO 7718-2:2016
|
Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle — Part 2: Upper deck doors
|
DIN 51130:2014-02
|
Testing of floor coverings - Determination of the anti-slip property - Workrooms and fields of activities with slip danger - Walking method - Ramp test
|
ISO 7176-3:2012
|
Wheelchairs — Part 3: Determination of effectiveness of brakes
|
ISO 7176-7:1998
|
Wheelchairs — Part 7: Measurement of seating and wheel dimensions
|
ISO 7718-1:2016
|
Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle — Part 1: Main deck doors
|
ISO 10542-2:2001
|
Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 2: Four-point strap-type tiedown systems
|
ISO 7176-5:2008
|
Wheelchairs — Part 5: Determination of dimensions, mass and manoeuvring space
|
EN 12184:2014
|
Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods
|
EN ISO 12100-1:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
|
EN ISO 14122-3:2016
|
Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)
|
ISO 7176-13:1989
|
Wheelchairs — Part 13: Determination of coefficient of friction of test surfaces
|
ISO 7176-8:2014
|
Wheelchairs Part 8: Requirements and test methods for static, impact and fatigue strengths
|
EN 1756-2:2004+A1:2009
|
Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers
|
EN 1915-2:2001+A1:2009
|
Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods
|
ISO 12100-2:2003
|
Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
|
ISO 13857:2008
|
Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
|
EN ISO 12100-2:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
|
ISO 7176-11:2012
|
Wheelchairs — Part 11: Test dummies
|
ISO 10254:1995
|
Air cargo and ground equipment Vocabulary
|
ISO 12100-1:2003
|
Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
|
EN ISO 13849-1:2015
|
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
|
ISO 13850:2015
|
Safety of machinery Emergency stop function Principles for design
|
ISO 9999:2016
|
Assistive products for persons with disability Classification and terminology
|
PREN 1915-1 : DRAFT 2010
|
AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
|
ISO 13849-1:2015
|
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
|