12/30257889 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
12-31-2013
English
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Classification
5 Requirements for concrete and methods of verification
6 Specification of concrete
7 Delivery of fresh concrete
8 Conformity control and conformity criteria
9 Production control
10 Evaluation of conformity
11 Designation for designed concrete
Annex A (normative) - Initial test
Annex B (normative) - Identity testing
Annex C (normative) - Provisions for assessment,
surveillance and certification of production
control
Annex D (normative) - Additional requirements for
concrete for special geotechnical works
Annex F (informative) - Recommendation for limiting
values of concrete composition
Annex G (informative) - Guidelines for self-compacting
concrete requirements in the fresh state
Annex K (informative) - Concrete families
Bibliography
BS EN 206
Committee |
B/517/1
|
DocumentType |
Draft
|
Pages |
88
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
PREN 206 : DRAFT 2012 | Identical |
EN 12390-3:2009/AC:2011 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
EN 12390-8:2009 | Testing hardened concrete - Part 8: Depth of penetration of water under pressure |
CR 13902:2000 | Test methods for determining the water/cement ratio of fresh concrete |
EN 196-2:2013 | Method of testing cement - Part 2: Chemical analysis of cement |
EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
ISO 7980:1986 | Water quality Determination of calcium and magnesium Atomic absorption spectrometric method |
CR 13901:2000 | The use of the concept of concrete families for the production and conformity control of concrete |
EN 12504-3:2005 | Testing concrete in structures - Part 3: Determination of pull-out force |
EN 12350-2:2009 | Testing fresh concrete - Part 2: Slump-test |
EN 12350-9:2010 | Testing fresh concrete - Part 9: Self-compacting concrete - V-funnel test |
EN 12350-6:2009 | Testing fresh concrete - Part 6: Density |
ISO 3951:1989 | Sampling procedures and charts for inspection by variables for percent nonconforming |
DIN 4030-2:2008-06 | ASSESSMENT OF WATER, SOIL AND GASES FOR THEIR AGGRESSIVENESS TO CONCRETE - PART 2: SAMPLING AND ANALYSIS OF WATER AND SOIL SAMPLES |
EN 13263-1:2005+A1:2009 | Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria |
EN 12390-7:2009 | Testing hardened concrete - Part 7: Density of hardened concrete |
PREN 13055 : DRAFT 2012 | LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, GROUT, BITUMINOUS MIXTURES, SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
EN 12390-5:2009 | Testing hardened concrete - Part 5: Flexural strength of test specimens |
EN 15743:2010+A1:2015 | Supersulfated cement - Composition, specifications and conformity criteria |
PREN 12620 : DRAFT 2015 | AGGREGATES FOR CONCRETE |
EN 12350-12:2010 | Testing fresh concrete - Part 12: Self-compacting concrete - J-ring test |
EN 1097-3:1998 | Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids |
EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
EN 12504-2:2012 | TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
EN 12350-11:2010 | Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test |
EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
EN 14889-2:2006 | Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity |
EN 12350-5:2009 | Testing fresh concrete - Part 5: Flow table test |
EN 14721:2005+A1:2007 | Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 12390-4:2000 | Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines |
EN 12350-8:2010 | Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test |
EN 14889-1:2006 | Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity |
EN 14216:2015 | Cement - Composition, specifications and conformity criteria for very low heat special cements |
EN 12390-1:2012 | TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS |
EN 12504-4:2004 | Testing concrete - Part 4: Determination of ultrasonic pulse velocity |
EN 12350-4:2009 | Testing fresh concrete - Part 4: Degree of compactability |
EN 12390-2:2009 | Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
ISO 9001:2015 | Quality management systems — Requirements |
EN 14488-7:2006 | Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete |
EN 450-1:2012 | Fly ash for concrete - Part 1: Definition, specifications and conformity criteria |
EN 15167-1:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria |
EN 12350-1:2009 | Testing fresh concrete - Part 1: Sampling |
EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
ISO 4316:1977 | Surface active agents — Determination of pH of aqueous solutions — Potentiometric method |
ISO 7150-2:1986 | Water quality Determination of ammonium Part 2: Automated spectrometric method |
EN 12390-6:2009 | Testing hardened concrete - Part 6: Tensile splitting strength of test specimens |
EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test |
EN 1992-1-1:2004/A1:2014 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
EN 12350-7:2009 | Testing fresh concrete - Part 7: Air content - Pressure methods |
ISO 7150-1:1984 | Water quality — Determination of ammonium — Part 1: Manual spectrometric method |
EN 12504-1:2009 | Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression |
EN 13577:2007 | Chemical attack on concrete - Determination of aggressive carbon dioxide content in water |
EN 13670:2009 | Execution of concrete structures |
CEN/TR 16349:2012 | Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete |
EN 12350-10:2010 | Testing fresh concrete - Part 10: Self-compacting concrete - L box test |
EN 934-2:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling |
EN 13791:2007 | Assessment of in-situ compressive strength in structures and precast concrete components |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.