|
EN 846-13:2001
|
Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings
|
|
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories
|
|
EN 10245-2:2011
|
Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
|
|
EN 998-2:2016
|
Specification for mortar for masonry - Part 2: Masonry mortar
|
|
EN ISO 180:2000/A2:2013
|
PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000/AMD 2:2013)
|
|
EN 10029:2010
|
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
|
|
EN 846-9:2016
|
Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels
|
|
EN ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
|
|
EN 846-14:2012
|
Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it
|
|
EN 10245-3:2011
|
Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
|
|
ISO 428:1983
|
Wrought copper-aluminium alloys — Chemical composition and forms of wrought products
|
|
EN ISO 178:2010/A1:2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
|
|
EN 10346:2015
|
Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
|
|
ISO 1463:2003
|
Metallic and oxide coatings Measurement of coating thickness Microscopical method
|
|
ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
|
|
EN 846-7:2012
|
Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
|
|
EN 846-10:2000
|
Methods of test for ancillary components for masonry - Part 10: Determination of load capacity and load deflection characteristics of brackets
|
|
EN 10245-1:2011
|
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
|
|
ISO 2039-2:1987
|
Plastics Determination of hardness Part 2: Rockwell hardness
|
|
EN 10143:2006 (edition 2)
|
Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
|
|
ISO 180:2000
|
Plastics Determination of Izod impact strength
|
|
EN 846-8:2000/A1:2006
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 8: DETERMINATION OF LOAD CAPACITY AND LOAD-DEFLECTION CHARACTERISTICS OF JOIST HANGERS
|
|
EN 846-5:2012
|
Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
|
|
ISO 427:1983
|
Wrought copper-tin alloys Chemical composition and forms of wrought products
|
|
ISO 306:2013
|
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
|
|
EN 10020:2000
|
Definition and classification of grades of steel
|
|
EN 846-2:2000
|
Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints
|
|
EN 846-3:2000
|
Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement
|
|
EN 846-4:2001/A1:2004
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 4: DETERMINATION OF LOAD CAPACITY AND LOAD-DEFLECTION CHARACTERISTICS OF STRAPS
|
|
EN 1996-2:2006/AC:2009
|
EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY
|
|
EN 846-11:2000
|
Methods of test for ancillary components for masonry - Part 11: Determination of dimensions and bow of lintels
|
|
ISO 178:2010
|
Plastics Determination of flexural properties
|
|
EN ISO 306:2013
|
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
|
|
EN ISO 2039-2 : 1999
|
PLASTICS - DETERMINATION OF HARDNESS - PART 2 - ROCKWELL HARDNESS
|
|
ISO 431:1981
|
Copper refinery shapes
|
|
EN 846-6:2012
|
Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.