13/30280057 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
04-30-2015
English
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements for design, analysis and examination
5 Selection of Materials
6 Principles of numerical analysis
7 Design actions
8 Verification of stability and equilibrium
9 Ground anchorages
10 Other structural components
11 Special design and manufacture criteria
12 Manufacture and supply
Annex A (informative) - Aerodynamic coefficients for round
shape tents
Annex B (informative) - Special design and manufacture
criteria and operation
Annex C (informative) - Examination and approval
Bibliography
BS EN 13782
Committee |
MCE/3/4
|
DocumentType |
Draft
|
Pages |
38
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
PREN 13782 : DRAFT 2013 | Identical |
EN 15616:2012 | Copper and copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method (FAAS) |
EN ISO 1346:2012 | Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) - 3-, 4-, 8- and 12-strand ropes (ISO 1346:2012) |
EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
EN ISO 6940 : 2004 | TEXTILE FABRICS - BURNING BEHAVIOUR - DETERMINATION OF EASE OF IGNITION OF VERTICALLY ORIENTED SPECIMENS |
ISO 209:2007 | Aluminium and aluminium alloys — Chemical composition |
ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
EN 1677-5:2001+A1:2008 | Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4 |
ISO 1141:2012 | Fibre ropes Polyester 3-, 4-, 8- and 12-strand ropes |
ISO 10042:2005 | Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections |
ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
EN 1624 : 1999 | TEXTILES AND TEXTILE PRODUCTS - BURNING BEHAVIOUR OF INDUSTRIAL AND TECHNICAL TEXTILES - PROCEDURE TO DETERMINE THE FLAME SPREAD OF VERTICALLY ORIENTED SPECIMENS |
ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
EN 1364-1:1999 | Fire resistance tests for non-loadbearing elements - Part 1: Walls |
IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
EN 1101:1995/A1:2005 | TEXTILES AND TEXTILE PRODUCTS - BURNING BEHAVIOUR - CURTAINS AND DRAPES - DETAILED PROCEDURE TO DETERMINE THE IGNITABILITY OF VERTICALLY ORIENTED SPECIMENS (SMALL FLAME) |
ISO 6940:2004 | Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens |
EN 13772:2011 | Textiles and textile products - Burning behaviour - Curtains and drapes - Measurement of flame spread of vertically oriented specimens with large ignition source |
EN 13773 : 2003 | TEXTILES AND TEXTILE PRODUCTS - BURNING BEHAVIOUR - CURTAINS AND DRAPES - CLASSIFICATION SCHEME |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
HD 60364-4-41:2017/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK |
EN 1991-1-3:2003/A1:2015 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-3: GENERAL ACTIONS - SNOW LOADS |
ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
EN 1677-2:2000+A1:2008 | Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8 |
EN ISO 6941 : 2003 | TEXTILE FABRICS - BURNING BEHAVIOUR - MEASUREMENT OF FLAME SPREAD PROPERTIES OF VERTICALLY ORIENTED SPECIMENS (ISO 6941:2003) |
EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
EN 13823:2010+A1:2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
EN 1991-1-2:2002/AC:2013 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE |
ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
ISO 2602:1980 | Statistical interpretation of test results Estimation of the mean Confidence interval |
ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
EN ISO 9239-1:2010 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
EN ISO 1969:2004 | Fibre ropes - Polyethylene - 3- and 4-strand ropes (ISO 1969:2004) |
EN ISO 9606-2:2004 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
EN 1991-1-1:2002/AC:2009 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS |
EN 14115:2001 | Textiles - Burning behaviour of materials for marquees, large tents and related products - Ease of ignition |
EN ISO 14731:2006 | Welding coordination - Tasks and responsibilities (ISO 14731:2006) |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
EN 1363-1:2012 | Fire resistance tests - Part 1: General Requirements |
EN 1997-1:2004/A1:2013 | EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES |
EN 1363-2:1999 | Fire resistance tests - Part 2: Alternative and additional procedures |
ISO 9239-1:2010 | Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
EN 1991-1-4:2005/A1:2010 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
EN 1102:2016 | Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the flame spread of vertically oriented specimens |
EN 729-3 : 1994 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - STANDARD QUALITY REQUIREMENTS |
EN ISO 1141:2012 | Fibre ropes - Polyester - 3-, 4-, 8- and 12-strand ropes (ISO 1141:2012) |
EN ISO 11925-2:2010/AC:2011 | REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
EN 1625 : 1999 | TEXTILES AND TEXTILE PRODUCTS - BURNING BEHAVIOUR OF INDUSTRIAL AND TECHNICAL TEXTILES - PROCEDURE TO DETERMINE THE IGNITABILITY OF VERTICALLY ORIENTED SPECIMENS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.