EN 12390-3:2009/AC:2011
|
TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS
|
EN ISO 9692-1:2013
|
Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013)
|
EN ISO 5817:2014
|
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
|
EN 197-1:2011
|
Cement - Part 1: Composition, specifications and conformity criteria for common cements
|
EN ISO 9692-2:1998/AC:1999
|
WELDING AND ALLIED PROCESSES - JOINT PREPARATION - PART 2: SUBMERGED ARC WELDING OF STEELS
|
EN ISO 11960:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
|
EN 1536:2010+A1:2015
|
Execution of special geotechnical work - Bored piles
|
EN 1994-1-1:2004/AC:2009
|
EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
|
EN 996:1995+A3:2009
|
Piling equipment - Safety requirements
|
EN ISO 4063:2010
|
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)
|
EN ISO 18276:2017
|
Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017)
|
EN 10080:2005
|
Steel for the reinforcement of concrete - Weldable reinforcing steel - General
|
EN 1008:2002
|
Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
|
EN 791:1995+A1:2009
|
Drill rigs - Safety
|
EN 1090-1:2009+A1:2011
|
Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
|
EN 445:2007
|
Grout for prestressing tendons - Test methods
|
ISO 5817:2014
|
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
|
EN ISO 17660-1:2006
|
Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006)
|
EN ISO 14341:2011
|
Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010)
|
EN 12620:2002+A1:2008
|
Aggregates for concrete
|
ISO 15630-3:2010
|
Steel for the reinforcement and prestressing of concrete Test methods Part 3: Prestressing steel
|
EN ISO 2560:2009
|
Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009)
|
EN 1993-5:2007/AC:2009
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING
|
EN 1991-1-1:2002/AC:2009
|
EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS
|
EN 1997-2:2007/AC:2010
|
EUROCODE 7 - GEOTECHNICAL DESIGN - PART 2: GROUND INVESTIGATION AND TESTING
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
EN ISO 17632:2015
|
Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015)
|
EN ISO 15609-1:2004
|
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
|
EN 10083-1:2006
|
Steels for quenching and tempering - Part 1: General technical delivery conditions
|
EN 206-1:2000/A2:2005
|
CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
|
EN 10083-2:2006
|
Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
|
EN 1090-2:2008+A1:2011
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
|
EN 447:2007
|
Grout for prestressing tendons - Basic requirements
|
EN 1997-1:2004/A1:2013
|
EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
|
PREN 10138-4 : DRAFT 2000
|
PRESTRESSING STEELS - PART 4: BARS
|
EN 1992-1-1:2004/A1:2014
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
|
EN 1998-1:2004/A1:2013
|
EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS
|
EN 1990:2002/A1:2005/AC:2010
|
EUROCODE - BASIS OF STRUCTURAL DESIGN
|
EN 1537:2013
|
Execution of special geotechnical works - Ground anchors
|
EN ISO 15630-3:2010
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010)
|
EN 13670:2009
|
Execution of concrete structures
|
EN 10083-3:2006/AC:2008
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
|
EN 757:1997
|
Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification
|
ISO 11960:2014
|
Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
|
EN 1993-1-1:2005/A1:2014
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
|
EN 934-2:2009+A1:2012
|
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
|
EN 1998-5:2004
|
EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 5: FOUNDATIONS, RETAINING STRUCTURES AND GEOTECHNICAL ASPECTS
|