13/30285580 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
08-31-2015
English
1 Scope
2 Conformance
3 Normative references
4 Terms, definitions and abbreviated terms
5 Pre-work requirements
6 Coating/lining materials
7 Surface preparation
8 Coating/lining application
9 Inspection and testing
10 Quality requirements
11 Documentation
Annex A (informative) - Dew point calculation chart
Annex B (informative) - Caulking (putty) application
Annex C (informative) - Coating/lining work record data sheet
Annex D (informative) - Coating/lining inspection and testing
data sheet
Bibliography
BS EN ISO 16961
Committee |
PSE/17
|
DocumentType |
Draft
|
Pages |
42
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
ISO 19840:2012 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces |
ASTM D 870 : 2015 | Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
ISO 8502-3:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
ISO/TS 29001:2010 | Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
ASTM D 512 : 2012 | Standard Test Methods for Chloride Ion In Water (Withdrawn 2021) |
NACE SP 01 88 : 2006 | DISCONTINUITY (HOLIDAY) TESTING OF NEW PROTECTIVE COATINGS ON CONDUCTIVE SUBSTRATES |
NACE SP 01 78 : 2007 | DESIGN, FABRICATION, AND SURFACE FINISH PRACTICES FOR TANKS AND VESSELS TO BE LINED FOR IMMERSION SERVICE |
ASTM D 4541 : 2017 : REDLINE | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
ASTM D 4417 : 2014 : REDLINE | Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
ASTM F 21 : 2014 : REDLINE | Standard Test Method for Hydrophobic Surface Films by the Atomizer Test |
API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
NACE 6G186 : 0 | SURFACE PREPARATION OF SOLUBLE SALT CONTAMINATED STEEL SUBSTRATES PRIOR TO COATING |
ISO 8502-10:1999 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 10: Field method for the titrimetric determination of water-soluble chloride |
OHSAS 18001:2007 | Occupational health and safety management systems. Requirements |
NACE 11 : 2003 | THIN-FILM ORGANIC LININGS APPLIED IN NEW CARBON STEEL PROCESS VESSELS |
SSPC-QP 1 : 2012 | STANDARD PROCEDURE FOR EVALUATING THE QUALIFICATIONS OF IINDUSTRIAL/MARINE PAINTING CONTRACTORS (FIELD APPLICATION TO COMPLEX INDUSTRIAL AND MARINE STEEL STRUCTURES) |
NACE 6A192 : 2000 | DEHUMIDIFICATION AND TEMPERATURE CONTROL DURING SURFACE PREPARATION, APPLICATION, AND CURING FOR COATINGS/LININGS OF STEEL TANKS, VESSELS, AND OTHER ENCLOSED SPACES |
ASTM D 4414 : 1995 | Standard Practice for Measurement of Wet Film Thickness by Notch Gages |
SSPC-PA 6 : 2002 | FIBERGLASS-REINFORCED PLASTIC (FRP) LININGS APPLIED TO BOTTOMS OF CARBON STEEL ABOVEGROUND STORAGE TANKS |
ASTM D 610 : 2008 | Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces |
NACE TM 01 74 : 2002 | LABORATORY METHODS FOR THE EVALUATION OF PROTECTIVE COATINGS AND LINING MATERIALS ON METALLIC SUBSTRATES IN IMMERSION SERVICE |
ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
SSPC-GUIDE 15 : 2013 | FIELD METHODS FOR EXTRACTION AND ANALYSIS OF SOLUBLE SALTS ON STEEL AND OTHER NONPOROUS SUBSTRATES |
API 2217A : 2009 | SAFE WORK IN INERT CONFINED SPACES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
ISO 11127-7:2011 | Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 7: Determination of water-soluble chlorides |
NACE 10 : 2002 | FIBERGLASS-REINFORCED PLASTIC (FRP) LININGS APPLIED TO BOTTOMS OF CARBON STEEL ABOVEGROUND STORAGE TANKS |
ASTM D 790 : 2017 : REDLINE | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
ISO 10474:2013 | Steel and steel products — Inspection documents |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO 80000-1:2009 | Quantities and units — Part 1: General |
ASTM G 42 : 2011 : REDLINE | TEST METHOD FOR CATHODIC DISBONDING OF PIPELINE COATINGS SUBJECTED TO ELEVATED TEMPERATURES |
API 2015 : 2014 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
ASTM D 5420 : 2016 : REDLINE | Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) |
ISO 8502-6:2006 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method |
ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
ISO 8502-2:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces |
SSPC-PA 8 : 2003 | THIN-FILM ORGANIC LININGS APPLIED IN NEW CARBON STEEL PROCESS VESSELS |
API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
ISO 8504-2:2000 | Preparation of steel substrates before application of paints and related products Surface preparation methods Part 2: Abrasive blast-cleaning |
SSPC-TR 3 : 2000 | DEHUMIDIFICATION AND TEMPERATURE CONTROL DURING SURFACE PREPARATION, APPLICATION, AND CURING FOR COATINGS/LININGS OF STEEL TANKS, VESSELS, AND OTHER ENCLOSED SPACES |
ISO 8502-11:2006 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
ISO Guide 31:2015 | Reference materials — Contents of certificates, labels and accompanying documentation |
NACE RP 02 87 : 2002 | FIELD MEASUREMENT OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL SURFACES USING A REPLICA TAPE |
ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
SSPC-GUIDE 12 : 2016 | GUIDE TO ILLUMINATION OF INDUSTRIAL COATING PROJECTS |
ISO 8504-3:1993 | Preparation of steel substrates before application of paints and related products Surface preparation methods Part 3: Hand- and power-tool cleaning |
ISO 8503-5:2017 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile |
API 652 : 2014 | LININGS OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.