13/30287824 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
BS EN 16668 - INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
Hardcopy , PDF
06-30-2016
English
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of valves
5 Additional requirements
Annex A (informative) - Classification based on PS and DN
Annex B (informative) - European harmonised standards
for materials and components for shell parts
Annex C (informative) - European Approval of Materials
(EAM)
Annex D (informative) - European harmonised standards
for valves
Annex E (normative) - Non-destructive testing of steel
Castings
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 97/23/EC (PED)
Bibliography
BS EN 16668.
Committee |
PSE/18/1
|
DocumentType |
Draft
|
Pages |
40
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
PREN 16668 : DRAFT 2013 | Identical |
EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
EN 444:1994 | Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays |
EN 12454 : 1998 | FOUNDING - VISUAL EXAMINATION OF SURFACE DISCONTINUITIES - STEEL SAND CASTINGS |
EN 15714-1:2009 | Industrial valves - Actuators - Part 1: Terminology and definitions |
EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
ASTM E 446 : 2015 : REDLINE | Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness |
ASTM E 186 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings |
EN 13445-5 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
EN 1013:2012+A1:2014 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
EN 10213:2007+A1:2016 | Steel castings for pressure purposes |
EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
EN 1349:2009 | Industrial process control valves |
AD 2000-Merkblatt A 4:2015-11 | ACCESSORY HOUSINGS |
EN 12266-2:2012 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
EN 462-3:1996 | Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes for ferrous metals |
EN 764-5:2014 | Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification |
EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
AD 2000-MERKBLATT W5:2009 | CAST STEEL |
PREN 12516-2 : DRAFT 2011 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS |
EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
EN ISO 9934-1:2016 | Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016) |
EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
EN ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016) |
EN 13445-4 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
EN 1370:2011 | Founding - Examination of surface condition |
EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
EN 12516-3:2002/AC:2003 | VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD |
EN 1371-1:2011 | Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings |
EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
EN 1371-2:2015 | Founding - Liquid penetrant testing - Part 2: Investment castings |
EN 583-1:1998/A1:2003 | NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - GENERAL PRINCIPLES |
EN 1515-4:2009 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
EN 10025-2:2004/AC:2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
EN 1369:2012 | Founding - Magnetic particle testing |
EN 462-1:1994 | Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value |
EN 12681 : 2003 | FOUNDING - RADIOGRAPHIC EXAMINATION |
EN 13018:2016 | NON-DESTRUCTIVE TESTING - VISUAL TESTING - GENERAL PRINCIPLES |
EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
PREN 12516-4 : DRAFT 2011 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
EN 571-1:1997 | Non destructive testing - Penetrant testing - Part 1: General principles |
EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
EN 19:2016 | Industrial valves - Marking of metallic valves |
EN 1982:2017 | Copper and copper alloys - Ingots and castings |
EN 764-4:2014 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
EN 1435:1997/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS |
EN 1561:2011 | Founding - Grey cast irons |
PREN 12516-1 : DRAFT 2011 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.