14/30272245 DC : 0
NA
Status of Standard is Unknown
Hardcopy , PDF
English
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
6 Information for use
Annex A (normative) - Impact test method
for guards on milling machines
Annex B (informative) - Equipment for
impact test
Annex C (informative) - Illustrative figures
as examples of milling machines
Annex D (informative) - Illustrative figures
as examples of guards
Annex E (informative) - Examples for the
integration of exhaust and
extinguishing systems when
using combustible coolants
Annex F (normative) - Provisions when
using combustible coolants
Annex G (informative) - Example of the
determination of performance level for
a interlocked guard
Annex H (informative) - Example of a
concept to leave and return to the
control cabin (control station) of a
group 2 and 3 machine
Annex I (informative) - Typical demand
rates of Safety functions
Annex J (normative) - Safety functions
Annex K (normative) - Break test for
gravity-loaded axes
Annex ZA (informative) - Relationship between
this International Standard and the Essential
Requirements of EU Directive 2006/42/EC
Bibliography
BS EN ISO 16090-1
Committee |
MTE/1/1
|
DocumentType |
Draft
|
Pages |
161
|
PublisherName |
British Standards Institution
|
Status |
NA
|
EN 1005-4:2005+A1:2008 | Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
ISO 13855:2010 | Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body |
ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
IEC 61000-6-4:2006+AMD1:2010 CSV | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
ISO 14119:2013 | Safety of machinery Interlocking devices associated with guards Principles for design and selection |
ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
ISO 11161:2007 | Safety of machinery — Integrated manufacturing systems — Basic requirements |
ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
EN 50370-2:2003 | Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity |
IEC TR 62061-1:2010 | Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery |
EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines |
ISO 9355-1:1999 | Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
ISO 14738:2002 | Safety of machinery — Anthropometric requirements for the design of workstations at machinery |
EN 1005-1:2001+A1:2008 | Safety of machinery - Human physical performance - Part 1: Terms and definitions |
EN 1005-2:2003+A1:2008 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
ISO 13851:2002 | Safety of machinery Two-hand control devices Functional aspects and design principles |
ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
EN 12445:2000 | Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods |
ISO 13856-2:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars |
IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
ISO 15641:2001 | Milling cutters for high speed machining — Safety requirements |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
ISO 8525:2008 | Airborne noise emitted by machine tools Operating conditions for metal-cutting machines |
ISO 16156:2004 | Machine-tools safety — Safety requirements for the design and construction of work holding chucks |
ISO 9355-3:2006 | Ergonomic requirements for the design of displays and control actuators — Part 3: Control actuators |
ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
ISO 13856-1:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
ISO 15534-1:2000 | Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery |
ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
ISO 11228-1:2003 | Ergonomics Manual handling Part 1: Lifting and carrying |
EN 50370-1 : 2005 | Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
ISO 15534-2:2000 | Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings |
ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
IEC 61000-6-2 : 3.0:2016 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS |
ISO 6385:2016 | Ergonomics principles in the design of work systems |
ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
IEC 61800-5-2:2016 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
ISO 9355-2:1999 | Ergonomic requirements for the design of displays and control actuators — Part 2: Displays |
IEC 61496-2:2013 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
ISO 19353:2015 | Safety of machinery Fire prevention and fire protection |
ISO 230-5:2000 | Test code for machine tools Part 5: Determination of the noise emission |
ISO 23125:2015 | Machine tools Safety Turning machines |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.