15/30309997 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
07-13-2017
English
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Derivation of vehicle reference masses
5 Staff, consumables and wear allowance
6 Standing area calculation
7 Payloads
Annex A (informative) - Densities
Annex B (informative) - Application standards
Annex ZA (informative) - Relationship between this
European Standard and the Essential Requirements
of Directive 2008/57/EC
Bibliography
BS EN 15663.
Committee |
RAE/3/-/11
|
DocumentType |
Draft
|
Pages |
25
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
PREN 15663 : DRAFT 2015 | Identical |
EN 14198:2016 | Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives |
EN 13452-1:2003 | Railway applications - Braking - Mass transit brake systems - Part 1: Performance requirements |
EN 15595:2009+A1:2011 | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
EN 15273-3:2013+A1:2016 | Railway applications - Gauges - Part 3: Structure gauges |
EN 14363:2016 | Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests |
UIC 566 : 1990 AMD 1 | LOADINGS OF COACH BODIES AND THEIR COMPONENTS |
EN 16286-1:2013 | Railway applications - Gangway systems between vehicles - Part 1: Main applications |
EN 14067-4:2013 | Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track |
EN 14067-5:2006+A1:2010 | Railway applications - Aerodynamics - Part 5: Requirements and test procedures for aerodynamics in tunnels |
EN 16286-2:2013 | Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
EN 16185-2:2014 | Railway applications - Braking systems of multiple unit trains - Part 2: Test methods |
EN 15839:2012+A1:2015 | Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal compressive forces |
EN 13452-2 : 2003 | RAILWAY APPLICATIONS - BRAKING - MASS TRANSIT BRAKE SYSTEMS - METHODS OF TEST |
EN 15734-1:2010/AC:2013 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
EN 15877-2:2013 | Railway applications - Markings of railway vehicles - Part 2: External markings on coaches, motive power units, locomotives and on track machines |
EN 12299:2009 | Railway applications - Ride comfort for passengers - Measurement and evaluation |
EN 13129-2 : 2004 | RAILWAY APPLICATIONS - AIR CONDITIONING FOR MAIN LINE ROLLING STOCK - PART 2: TYPE TESTS |
DIN 25008:2005-10 | Railway vehicles - Principles for the determination of vehicle weights - Terms and definitions, symbols, values |
EN 12082:2017 | Railway applications - Axleboxes - Performance testing |
EN 15273-2:2013+A1:2016 | Railway applications - Gauges - Part 2: Rolling stock gauge |
EN 50553 : 2012 AMD 1 2016 | RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK |
EN 15273-1:2013+A1:2016/AC:2017 | RAILWAY APPLICATIONS - GAUGES - PART 1: GENERAL - COMMON RULES FOR INFRASTRUCTURE AND ROLLING STOCK |
EN 15179:2007 | Railway applications - Braking - Requirements for the brake system of coaches |
EN 15227:2008+A1:2010 | Railway applications - Crashworthiness requirements for railway vehicle bodies |
PREN 16834 : DRAFT 2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PERFORMANCE |
EN 14750-2 : 2006 | RAILWAY APPLICATIONS - AIR CONDITIONING FOR URBAN AND SUBURBAN ROLLING STOCK - PART 2: TYPE TESTS |
CEN/TS 13979-2:2011 | Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 2: Cast wheels |
EN 14067-1:2003 | Railway applications - Aerodynamics - Part 1: Symbols and units |
EN 13104:2009+A2:2012 | Railway applications - Wheelsets and bogies - Powered axles - Design method |
EN 15746-1:2010+A1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working |
EN 13129-1 : 2002 | RAILWAY APPLICATIONS - AIR CONDITIONING FOR MAIN LINE ROLLING STOCK - PART 1: COMFORT PARAMETERS |
EN 15528:2015 | Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure |
EN 16235:2013 | Railway application - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Conditions for dispensation of freight wagons with defined characteristics from on-track tests according to EN 14363 |
EN 15734-2:2010/AC:2012 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 2: TEST METHODS |
EN 14033-2:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working |
EN 14033-1:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running |
EN 14750-1 : 2006 | RAILWAY APPLICATIONS - AIR CONDITIONING FOR URBAN AND SUBURBAN ROLLING STOCK - PART 1: COMFORT PARAMETERS |
EN 13298:2003 | Railway applications - Suspension components - Helical suspension springs, steel |
EN 14067-6:2010 | Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment |
EN 16404:2016 | Railway applications - Re-railing and recovery requirements for railway vehicles |
PREN 15654-2 : DRAFT 2016 | RAILWAY APPLICATIONS - MEASUREMENT OF VERTICAL FORCES ON WHEELS AND WHEELSETS - PART 2: TEST IN WORKSHOP FOR NEW, MODIFIED AND MAINTAINED VEHICLES |
EN 14067-3:2003 | Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels |
EN 12663-1:2010+A1:2014 | Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons) |
EN 15746-2:2010+A1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
PN EN 15877-1 : 2012 | RAILWAY APPLICATIONS - MARKING ON RAILWAY VEHICLES - PART 1: FREIGHT WAGONS |
EN 13103:2009+A2:2012 | Railway applications - Wheelsets and bogies - Non powered axles - Design method |
EN 13979-1:2003+A2:2011 | Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels |
EN 12663-2:2010 | Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons |
EN 13749:2011 | Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
EN 15827:2011 | Railway applications - Requirements for bogies and running gears |
EN 14033-3:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
EN 16185-1:2014 | Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.