15/30326284 DC : 0
NA
Status of Standard is Unknown
Hardcopy , PDF
English
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Principles of classification
5 The process of description and classification
6 Classification by intrinsic parameters
7 Classification by State Parameters
8 Characteristics and tests for assessing
earthworks materials in situ
9 Sampling of soil and rock
10 Test standards to support classification
Annex A (informative) - List of test standards
relevant to earthworks
Bibliography
BS EN 16907-2.
Committee |
B/526/-/1
|
DocumentType |
Draft
|
Pages |
40
|
PublisherName |
British Standards Institution
|
Status |
NA
|
Standards | Relationship |
PREN 16907-2 : DRAFT 2015 | Identical |
EN ISO/TS 17892-12 : 2004 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 12: DETERMINATION OF ATTERBERG LIMITS |
EN ISO/TS 17892-10 : 2004 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 10: DIRECT SHEAR TESTS |
ISO 17313:2004 | Soil quality Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter |
EN 13286-1:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING |
EN 932-2:1999 | Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples |
EN 1367-1:2007 | Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing |
ISO/TS 17892-8:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 8: Unconsolidated undrained triaxial test |
ISO/TS 17892-9:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 9: Consolidated triaxial compression tests on water-saturated soils |
EN ISO 11272:2017 | Soil quality - Determination of dry bulk density (ISO 11272:2017) |
EN 932-3:1996/A1:2003 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 3: PROCEDURE AND TERMINOLOGY FOR SIMPLIFIED PETROGRAPHIC DESCRIPTION |
ISO 10381-1:2002 | Soil quality Sampling Part 1: Guidance on the design of sampling programmes |
ISO 11272:2017 | Soil quality — Determination of dry bulk density |
EN 13286-2:2010/AC:2012 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 2: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PROCTOR COMPACTION |
ISO 17892-5:2017 | Geotechnical investigation and testing Laboratory testing of soil Part 5: Incremental loading oedometer test |
EN 14227-14:2006 | Hydraulically bound mixtures - Specifications - Part 14: Soil treated by fly ash |
ISO 10693:1995 | Soil quality Determination of carbonate content Volumetric method |
EN ISO/TS 17892-8 : 2004 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 8: UNCONSOLIDATED UNDRAINED TRIAXIAL TEST |
EN 13286-40:2003 | Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures |
EN 1744-5:2006 | Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts |
ISO 14688-1:2002 | Geotechnical investigation and testing Identification and classification of soil Part 1: Identification and description |
EN 13286-43:2003 | Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures |
ISO 11271:2002 | Soil quality — Determination of redox potential — Field method |
EN 1097-5:2008 | Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven |
EN ISO/TS 17892-9 : 2004 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 9: CONSOLIDATED TRIAXIAL COMPRESSION TESTS ON WATER SATURATED SOIL |
EN 14580:2005 | Natural stone test methods - Determination of static elastic modulus |
ISO 17892-2:2014 | Geotechnical investigation and testing Laboratory testing of soil Part 2: Determination of bulk density |
EN 1367-4:2008 | Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage |
ISO/TS 17892-10:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests |
EN 1744-1:2009+A1:2012 | Tests for chemical properties of aggregates - Part 1: Chemical analysis |
EN 1097-3:1998 | Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids |
ISO 10381-2:2002 | Soil quality Sampling Part 2: Guidance on sampling techniques |
EN 933-9:2009+A1:2013 | Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test |
EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
ISO 11277:2009 | Soil quality Determination of particle size distribution in mineral soil material Method by sieving and sedimentation |
EN ISO 10769:2011 | Clay geosynthetic barriers - Determination of water absorption of bentonite (ISO 10769:2011) |
ISO 22475-1:2006 | Geotechnical investigation and testing Sampling methods and groundwater measurements Part 1: Technical principles for execution |
EN 1744-3:2002 | Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates |
EN 1367-2:2009 | Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test |
ISO 17892-6:2017 | Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test |
ISO 14689-1:2003 | Geotechnical investigation and testing Identification and classification of rock Part 1: Identification and description |
EN 13286-47:2012 | Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling |
EN ISO 11274:2014 | Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:1998 + Cor 1:2009) |
ISO 17892-1:2014 | Geotechnical investigation and testing Laboratory testing of soil Part 1: Determination of water content |
EN 13286-46:2003 | Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value |
ISO/TS 17892-11:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 11: Determination of permeability by constant and falling head |
EN 13383-2:2013 | Armourstone - Part 2: Test methods |
ISO 14688-2:2004 | Geotechnical investigation and testing Identification and classification of soil Part 2: Principles for a classification |
ISO/TS 17892-12:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 12: Determination of Atterberg limits |
EN 1926:2006 | Natural stone test methods - Determination of uniaxial compressive strength |
EN 1367-5:2011 | Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock |
EN 13286-41:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 41: TEST METHOD FOR DETERMINATION OF THE COMPRESSIVE STRENGTH OF HYDRAULICALLY BOUND MIXTURES |
EN 13286-5:2003 | Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content - Vibrating table |
EN ISO 14689-1 : 2003 | GEOTECHNICAL INVESTIGATION AND TESTING - IDENTIFICATION AND CLASSIFICATION OF ROCK - PART 1: IDENTIFICATION AND DESCRIPTION |
EN 13286-4:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PART 4: VIBRATING HAMMER |
EN 1997-2:2007/AC:2010 | EUROCODE 7 - GEOTECHNICAL DESIGN - PART 2: GROUND INVESTIGATION AND TESTING |
EN 1097-1:2011 | Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
EN ISO 17892-2:2014 | Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014) |
ISO/R 1076:1969 | Withdrawal of ISO/R 1076-1969 |
EN 1097-4:2008 | Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler |
ISO 11274:1998 | Soil quality Determination of the water-retention characteristic Laboratory methods |
ISO 10390:2005 | Soil quality Determination of pH |
EN 14146:2004 | Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency) |
ISO 10694:1995 | Soil quality Determination of organic and total carbon after dry combustion (elementary analysis) |
ISO 14235:1998 | Soil quality Determination of organic carbon by sulfochromic oxidation |
EN ISO/TS 17892-7 : 2004 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 7: UNCONFINED COMPRESSION TEST ON FINE GRAINED SOILS |
EN 13286-3:2003 | Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters |
EN ISO 17892-1:2014 | Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content (ISO 17892-1:2014) |
EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
ISO 11048:1995 | Soil quality Determination of water-soluble and acid-soluble sulfate |
EN ISO/TS 17892-11 : 2004 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 11: DETERMINATION OF PERMEABILITY BY CONSTANT AND FALLING HEAD |
EN ISO 10693 : 2014 | SOIL QUALITY - DETERMINATION OF CARBONATE CONTENT - VOLUMETRIC METHOD (ISO 10693:1995) |
ISO/TS 17892-7:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 7: Unconfined compression test on fine-grained soils |
EN 13383-1:2002/AC:2004 | ARMOURSTONE - PART 1: SPECIFICATION |
EN ISO 22475-1:2006 | Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution (ISO 22475-1:2006) |
ISO 11508:2017 | Soil quality — Determination of particle density |
EN 1367-6:2008 | Tests for thermal and weathering properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl) |
ISO 10381-8:2006 | Soil quality Sampling Part 8: Guidance on sampling of stockpiles |
ISO 17312:2005 | Soil quality Determination of hydraulic conductivity of saturated porous materials using a rigid-wall permeameter |
EN 932-1:1996 | Tests for general properties of aggregates - Part 1: Methods for sampling |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.