15/30328781 DC : 0
NA
Status of Standard is Unknown
Hardcopy , PDF
English
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Required characteristics and corresponding
methods of test
5 Assessment and verification of constancy of
performance (AVCP)
6 Marking
Annex A (normative) - Factory production control
Annex B (normative) - Durability aspects
Annex C (informative) - Guidelines for the selection
of the appropriate standard in a specific
application
Annex D (informative) - Significant technical changes
to superseded editions of this standard
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the
EU Construction Products Regulation
Bibliography
BS EN 13256.
Committee |
B/553
|
DocumentType |
Draft
|
Pages |
40
|
PublisherName |
British Standards Institution
|
Status |
NA
|
Standards | Relationship |
PREN 13256 : DRAFT 2015 | Identical |
EN 13265:2016 | Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects |
EN ISO 13433:2006 | Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433:2006) |
EN ISO 14021:2016 | Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016) |
ISO 10321:2008 | Geosynthetics — Tensile test for joints/seams by wide-width strip method |
EN 12226:2012 | Geosynthetics - General tests for evaluation following durability testing |
ISO 13438:2004 | Geotextiles and geotextile-related products Screening test method for determining the resistance to oxidation |
EN ISO 10319:2015 | Geosynthetics - Wide-width tensile test (ISO 10319:2015) |
EN 13251:2016 | Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures |
EN ISO 13426-2:2005 | Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005) |
EN 13249:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) |
ISO 10320:1999 | Geotextiles and geotextile-related products Identification on site |
EN ISO 1043-1:2011/A1:2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
ISO 12236:2006 | Geosynthetics — Static puncture test (CBR test) |
EN 14030:2001/A1:2003 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO ACID AND ALKALINE LIQUIDS |
EN ISO 13426-1 : 2003 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 1: GEOCELLS |
EN 14574:2015 | Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics |
EN 13253:2016 | Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments) |
ISO 10319:2015 | Geosynthetics — Wide-width tensile test |
ISO 14021:2016 | Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) |
EN 13250:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways |
EN ISO 10321:2008 | Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008) |
EN 12224 : 2000 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING |
CEN/TR 15019 : 2005 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - ON-SITE QUALITY CONTROL |
ISO 13426-2:2005 | Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 2: Geocomposites |
EN 13255:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals |
ISO 9862:2005 | Geosynthetics — Sampling and preparation of test specimens |
EN ISO 10320:1999 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - IDENTIFICATION ON SITE |
EN 13254:2016 | Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams |
ISO 13433:2006 | Geosynthetics — Dynamic perforation test (cone drop test) |
ISO/TS 13434:2008 | Geosynthetics Guidelines for the assessment of durability |
ISO 12957-1:2005 | Geosynthetics Determination of friction characteristics Part 1: Direct shear test |
EN ISO 10318-1:2015 | Geosynthetics - Part 1: Terms and definitions (ISO 10318-1:2015) |
EN ISO 12957-2:2005 | Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2005) |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO/TR 12960:1998 | Geotextiles and geotextile-related products Screening test method for determining the resistance to liquids |
ISO 13426-1:2003 | Geotextiles and geotextile-related products Strength of internal structural junctions Part 1: Geocells |
ISO 12957-2:2005 | Geosynthetics — Determination of friction characteristics — Part 2: Inclined plane test |
EN 12225 : 2000 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - METHOD FOR DETERMINING THE MICROBIOLOGICAL RESISTANCE BY A SOIL BURIAL TEST |
ASTM D 7409 : 2015 : REDLINE | Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 10390:2005 | Soil quality Determination of pH |
ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
EN 1997-1:2004/A1:2013 | EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES |
EN ISO 12236:2006 | Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006) |
EN 13257:2016 | Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals |
ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
EN 12447:2001 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO HYDROLYSIS IN WATER |
EN 13252:2016 | Geotextiles and geotextile-related products - Characteristics required for use in drainage systems |
EN ISO 10722:2007 | Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (ISO 10722:2007) |
EN ISO 9862:2005 | Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005) |
ISO 10722:2007 | Geosynthetics Index test procedure for the evaluation of mechanical damage under repeated loading Damage caused by granular material |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.