16/30319099 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
01-31-2018
English
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms and subscripts
5 Design and performance requirements
for PPE items and ensembles
6 Marking
7 Manufacturers instructions to be supplied
with each item of PPE
Annex A (informative) - Structure of the ISO 18639-
series of international standard
Annex B (informative) - Design of the ISO 18639
individual standards for Part 3 onward
Annex C (informative) - Information on risk
assessment
BS ISO 18639-1.
Committee |
PH/14
|
DocumentType |
Draft
|
Pages |
26
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
ISO 13287:2012 | Personal protective equipment Footwear Test method for slip resistance |
ISO 6530:2005 | Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids |
ISO 17492:2003 | Clothing for protection against heat and flame Determination of heat transmission on exposure to both flame and radiant heat |
EN 13087-6:2012 | Protective helmets - Test methods - Part 6: Field of vision |
ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
EN 13087-5:2012 | Protective helmets - Test methods - Part 5: Retention system strength |
ISO 13688:2013 | Protective clothing — General requirements |
ISO 12127:1996 | Clothing for protection against heat and flame Determination of contact heat transmission through protective clothing or constituent materials |
ISO 6942:2002 | Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
EN 388 : 1994 | PROTECTIVE GLOVES AGAINST MECHANICAL RISKS |
ISO 9151:2016 | Protective clothing against heat and flame Determination of heat transmission on exposure to flame |
EN 13087-2:2012 | Protective helmets - Test methods - Part 2: Shock absorption |
ISO/TS 11999-2:2015 | PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 2: Compatibility |
EN 13087-1:2000/A1:2001 | PROTECTIVE HELMETS - TEST METHODS - PART 1: CONDITIONS AND CONDITIONING |
ISO 15025:2016 | Protective clothing Protection against flame Method of test for limited flame spread |
ISO 13997:1999 | Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects |
ISO 4869:1981 | Acoustics Measurement of sound attenuation of hearing protectors Subjective method |
ISO/TS 16976-1:2015 | Respiratory protective devices — Human factors — Part 1: Metabolic rates and respiratory flow rates |
ISO 17493:2016 | Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven |
EN 420:2003+A1:2009 | Protective gloves - General requirements and test methods |
EN 16473:2014 | Firefighters helmets - Helmets for technical rescue |
ISO 16604:2004 | Clothing for protection against contact with blood and body fluids Determination of resistance of protective clothing materials to penetration by blood-borne pathogens Test method using Phi-X 174 bacteriophage |
EN 13087-8:2000/A1:2005 | PROTECTIVE HELMETS - TEST METHODS - PART 8: ELECTRICAL PROPERTIES |
ISO 12947-4:1998 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 4: Assessment of appearance change |
ISO 20471:2013 | High visibility clothing — Test methods and requirements |
ISO 811:1981 | Textile fabrics Determination of resistance to water penetration Hydrostatic pressure test |
ISO 11092:2014 | Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) |
ISO/TR 21808:2009 | Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters |
EN 443:2008 | Helmets for fire fighting in buildings and other structures |
EN 960:2006 | Headforms for use in the testing of protective helmets |
ISO 139:2005 | Textiles Standard atmospheres for conditioning and testing |
ISO 20345:2011 | Personal protective equipment Safety footwear |
ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
EN 13087-4:2012 | Protective helmets - Test methods - Part 4: Retention system effectiveness |
ISO 4920:2012 | Textile fabrics — Determination of resistance to surface wetting (spray test) |
ISO 12947-2:2016 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown |
ISO 3873:1977 | Industrial safety helmets |
ISO 17491-5:2013 | Protective clothing — Test methods for clothing providing protection against chemicals — Part 5: Determination of resistance to penetration by a spray of liquid (manikin spray test) |
EN 13087-10:2012 | Protective helmets - Test methods - Part 10: Resistance to radiant heat |
EN 1149-5:2008 | Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements |
ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
ISO 13996:1999 | Protective clothing Mechanical properties Determination of resistance to puncture |
ISO 9185:2007 | Protective clothing — Assessment of resistance of materials to molten metal splash |
ISO 20344:2011 | Personal protective equipment Test methods for footwear |
EN 397:2012+A1:2012 | Industrial safety helmets |
EN 1149-3:2004 | Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.