17/30348303 DC : 0
NA
NA
Status of Standard is Unknown
BS EN 17087 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE FOR TESTING OF RELEASE AND ANALYSIS OF CONTENT
Available format(s)
Hardcopy , PDF
Language(s)
English
Publisher
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Equipment
6 Interferences and sources of error
7 Procedure
8 Report
Annex A (normative) - Guideline for choosing sample
treatment techniques
Annex B (informative) - Relationship between minimum
amount of (sub-)sample and particle size
Annex C (informative) - Sample treatment equipment
Annex D (informative) - Examples of analytical methods
for content and leaching
Annex E (informative) - Examples of preparation
of test samples
Bibliography
BS EN 17087.
| Committee |
B/557
|
| DocumentType |
Draft
|
| Pages |
47
|
| PublisherName |
British Standards Institution
|
| Status |
NA
|
| Standards | Relationship |
| PREN 17087 : DRAFT 2017 | Identical |
| CEN/TR 15310-2 : 2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 2: GUIDANCE ON SAMPLING TECHNIQUES |
| ISO 5664:1984 | Water quality — Determination of ammonium — Distillation and titration method |
| EN 932-2:1999 | Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples |
| EN ISO 14403 : 2002 | WATER QUALITY - DETERMINATION OF TOTAL CYANIDE AND FREE CYANIDE BY CONTINUOUS FLOW ANALYSIS |
| ISO 14402:1999 | Water quality Determination of phenol index by flow analysis (FIA and CFA) |
| EN 12457-2:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction) |
| EN ISO 15009:2016 | Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption (ISO 15009:2016) |
| CEN/TS 16637-2:2014 | Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching test |
| EN ISO 11885:2009 | Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007) |
| EN 27888 : 1993 | WATER QUALITY - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| ISO 11969:1996 | Water quality Determination of arsenic Atomic absorption spectrometric method (hydride technique) |
| EN 14997:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control |
| ISO 15009:2016 | Soil quality Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons Purge-and-trap method with thermal desorption |
| ISO 11074-2:1998 | Soil quality Vocabulary Part 2: Terms and definitions relating to sampling |
| ISO 11083:1994 | Water quality — Determination of chromium(VI) — Spectrometric method using 1,5-diphenylcarbazide |
| EN ISO 11732:2005 | Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005) |
| EN ISO 10523:2012 | Water quality - Determination of pH (ISO 10523:2008) |
| EN ISO 12846:2012 | Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012) |
| EN 26777 : 1993 | WATER QUALITY - DETERMINATION OF NITRITE - MOLECULAR ABSORPTION SPECTROMETRIC METHOD |
| ISO 10381-6:2009 | Soil quality Sampling Part 6: Guidance on the collection, handling and storage of soil under aerobic conditions for the assessment of microbiological processes, biomass and diversity in the laboratory |
| ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
| ISO 13877:1998 | Soil quality Determination of polynuclear aromatic hydrocarbons Method using high -performance liquid chromatography |
| ISO 11464:2006 | Soil quality Pretreatment of samples for physico-chemical analysis |
| CEN/TR 15310-1 : 2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 1: GUIDANCE ON SELECTION AND APPLICATION OF CRITERIA FOR SAMPLING UNDER VARIOUS CONDITIONS |
| EN 1484 : 1997 | WATER ANALYSIS - GUIDELINES FOR THE DETERMINATION OF TOTAL ORGANIC CARBON (TOC) AND DISSOLVED ORGANIC CARBON (DOC) |
| ISO 11732:2005 | Water quality — Determination of ammonium nitrogen — Method by flow analysis (CFA and FIA) and spectrometric detection |
| EN 13137 : 2001 | CHARACTERIZATION OF WASTE - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) IN WASTE, SLUDGES AND SEDIMENTS |
| ISO 12846:2012 | Water quality — Determination of mercury — Method using atomic absorption spectrometry (AAS) with and without enrichment |
| EN 15308:2016 | Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection |
| EN 14582:2016 | Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods |
| EN 12457-4:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction) |
| ISO 8288:1986 | Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods |
| ISO 5667-15:2009 | Water quality — Sampling — Part 15: Guidance on the preservation and handling of sludge and sediment samples |
| EN 14346:2006 | CHARACTERIZATION OF WASTE - CALCULATION OF DRY MATTER BY DETERMINATION OF DRY RESIDUE OR WATER CONTENT |
| ISO 6777:1984 | Water quality — Determination of nitrite — Molecular absorption spectrometric method |
| ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
| ISO 10304-1:2007 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
| ISO 5667-3:2012 | Water quality Sampling Part 3: Preservation and handling of water samples |
| ISO 10382:2002 | Soil quality — Determination of organochlorine pesticides and polychlorinated biphenyls — Gas-chromatographic method with electron capture detection |
| ISO 6703-2:1984 | Water quality — Determination of cyanide — Part 2: Determination of easily liberatable cyanide |
| ISO 6439:1990 | Water quality — Determination of phenol index — 4-Aminoantipyrine spectrometric methods after distillation |
| EN 13965-1 : 2004 COR 2005 | CHARACTERIZATION OF WASTE - TERMINOLOGY - PART 1: MATERIAL RELATED TERMS AND DEFINITIONS |
| ISO 13395:1996 | Water quality — Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection |
| CEN/TR 16220:2011 | Construction products - Assessment of release of dangerous substances - Complement to sampling |
| ISO 10359-1:1992 | Water quality — Determination of fluoride — Part 1: Electrochemical probe method for potable and lightly polluted water |
| EN 16687:2015 | Construction products - Assessment of release of dangerous substances - Terminology |
| ISO 14507:2003 | Soil quality Pretreatment of samples for determination of organic contaminants |
| ISO 7888:1985 | Water quality — Determination of electrical conductivity |
| EN 12457-1:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| EN 15192:2006 | Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection |
| EN 16192:2011 | Characterization of waste - Analysis of eluates |
| EN 15309:2007 | Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
| ISO 14403:2002 | Water quality Determination of total cyanide and free cyanide by continuous flow analysis |
| EN ISO 5667-3:2012 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
| ISO 9562:2004 | Water quality — Determination of adsorbable organically bound halogens (AOX) |
| CEN/TS 16637-3:2016 | Construction products - Assessment of release of dangerous substances - Part 3: Horizontal up-flow percolation test |
| EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
| EN 15169:2007 | Characterization of waste - Determination of loss on ignition in waste, sludge and sediments |
| EN 13656 : 2002 | CHARACTERIZATION OF WASTE - MICROWAVE ASSISTED DIGESTION WITH HYDROFLUORIC (HF), NITRIC (HNO[3]), AND HYDROCHLORIC (HCL) ACID MIXTURE FOR SUBSEQUENT DETERMINATION OF ELEMENTS |
| EN 14345 : 2004 | CHARACTERIZATION OF WASTE - DETERMINATION OF HYDROCARBON CONTENT BY GRAVIMETRY |
| EN 12457-3:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| EN 14039 : 2004 | CHARACTERIZATION OF WASTE - DETERMINATION OF HYDROCARBON CONTENT IN THE RANGE OF C[10] TO C[40] BY GAS CHROMATOGRAPHY |
| EN 13657:2002 | Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements |
| EN ISO 9562:2004 | Water quality - Determination of adsorbable organically bound halogens (AOX) (ISO 9562:2004) |
| EN ISO 5667-15:2009 | Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples (ISO 5667-15:2009) |
| ISO 7150-1:1984 | Water quality — Determination of ammonium — Part 1: Manual spectrometric method |
| ISO 10523:2008 | Water quality — Determination of pH |
| CEN/TR 15310-3 : 2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 3: GUIDANCE ON PROCEDURES FOR SUB-SAMPLING IN THE FIELD |
| EN 14899:2005 | Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan |
| CEN/TR 15310-4 : 2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 4: GUIDANCE ON PROCEDURES FOR SAMPLE PACKAGING, STORAGE, PRESERVATION, TRANSPORT AND DELIVERY |
| EN ISO 11969:1996 | WATER QUALITY - DETERMINATION OF ARSENIC - ATOMIC ABSORPTION SPECTROMETRIC METHOD (HYDRIDE TECHNIQUE) |
| CEN/TR 16045:2010 | Construction Products - Assessment of release of dangerous substances - Content of regulated dangerous substances - Selection of analytical methods |
| EN ISO 14402 : 1999 | WATER QUALITY - DETERMINATION OF PHENOL INDEX BY FLOW ANALYSIS (FIA AND CFA) |
| EN ISO 10304-1:2009 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007) |
| EN ISO 13395 : 1996 | WATER QUALITY - DETERMINATION OF NITRITE NITROGEN AND NITRATE NITROGEN AND THE SUM OF BOTH BY FLOW ANALYSIS (CFA AND FIA) AND SPECTROMETRIC DETECTION |
US$23.96
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.