17/30353403 DC : 0
NA
Status of Standard is Unknown
Hardcopy , PDF
English
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Required characteristics and corresponding
methods of test
5 Assessment and verification of constancy of
performance (AVCP)
6 Marking
Annex A (normative) - Durability aspects
Annex B (normative) - Determination of thickness of erosion
control products
Annex C (normative) - Determination of rebound resilience
of erosion control products
Annex D (normative) - Behaviour of erosion control products
at low and elevated temperatures
Annex E (normative) - Determination of opening size of
erosion control products
Annex F (normative) - Determination of turf-filling ratioof
erosion control products
Annex G (normative) - Determination of water absorption
capacity of erosion control products - Immersion method
Annex H (normative) - Determination of smoulder resistance of
erosion control products
Annex I (normative) - Environmental harmlessness test of
erosion control products
Annex ZA (informative) - Relationship of this European
Standard with Regulation (EU) No. 305/2011
Bibliography
BS EN 17097.
Committee |
B/553
|
DocumentType |
Draft
|
Pages |
63
|
PublisherName |
British Standards Institution
|
Status |
NA
|
Standards | Relationship |
PREN 17097 : DRAFT 2017 | Identical |
EN ISO 14021:2016 | Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016) |
EN 12226:2012 | Geosynthetics - General tests for evaluation following durability testing |
ISO 3310-1:2016 | Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth |
EN 15933:2012 | Sludge, treated biowaste and soil - Determination of pH |
ISO 13438:2004 | Geotextiles and geotextile-related products Screening test method for determining the resistance to oxidation |
ISO 12956:2010 | Geotextiles and geotextile-related products Determination of the characteristic opening size |
EN ISO 10319:2015 | Geosynthetics - Wide-width tensile test (ISO 10319:2015) |
EN ISO 13426-2:2005 | Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005) |
ISO 10320:1999 | Geotextiles and geotextile-related products Identification on site |
EN ISO 1043-1:2011/A1:2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
EN 14030:2001/A1:2003 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO ACID AND ALKALINE LIQUIDS |
ISO 9863-1:2016 | Geosynthetics Determination of thickness at specified pressures Part 1: Single layers |
EN 1848-2 : 2001 | FLEXIBLE SHEETS FOR WATER-PROOFING - DETERMINATION OF LENGTH, WIDTH, STRAIGHTNESS AND FLATNESS - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
EN ISO 13426-1 : 2003 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 1: GEOCELLS |
ISO 25619-2:2015 | Geosynthetics Determination of compression behaviour Part 2: Determination of short-term compression behaviour |
EN ISO 25619-2:2015 | Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour (ISO 25619-2:2015) |
ISO 10319:2015 | Geosynthetics — Wide-width tensile test |
ISO 14021:2016 | Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) |
ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
EN 1484 : 1997 | WATER ANALYSIS - GUIDELINES FOR THE DETERMINATION OF TOTAL ORGANIC CARBON (TOC) AND DISSOLVED ORGANIC CARBON (DOC) |
ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
EN 12224 : 2000 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING |
CEN/TR 15019 : 2005 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - ON-SITE QUALITY CONTROL |
ISO 13426-2:2005 | Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 2: Geocomposites |
ISO 9862:2005 | Geosynthetics — Sampling and preparation of test specimens |
EN ISO 10320:1999 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - IDENTIFICATION ON SITE |
ISO/TS 13434:2008 | Geosynthetics Guidelines for the assessment of durability |
EN 1744-3:2002 | Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates |
EN ISO 10318-1:2015 | Geosynthetics - Part 1: Terms and definitions (ISO 10318-1:2015) |
EN ISO 11058:2010 | Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:2010) |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO/TR 12960:1998 | Geotextiles and geotextile-related products Screening test method for determining the resistance to liquids |
ISO 11058:2010 | Geotextiles and geotextile-related products Determination of water permeability characteristics normal to the plane, without load |
ISO 13426-1:2003 | Geotextiles and geotextile-related products Strength of internal structural junctions Part 1: Geocells |
EN 12225 : 2000 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - METHOD FOR DETERMINING THE MICROBIOLOGICAL RESISTANCE BY A SOIL BURIAL TEST |
ASTM D 7409 : 2015 : REDLINE | Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns |
ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
EN ISO 9864:2005 | Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005) |
EN ISO 9863-1:2016 | Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (ISO 9863-1:2016) |
EN 12457-1:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
EN 1997-1:2004/A1:2013 | EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES |
ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
EN 12447:2001 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO HYDROLYSIS IN WATER |
EN ISO 12956:2010 | Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:2010) |
EN ISO 11925-2:2010/AC:2011 | REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
ISO 9864:2005 | Geosynthetics — Test method for the determination of mass per unit area of geotextiles and geotextile-related products |
EN ISO 9862:2005 | Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005) |
CEN/TS 14416:2014 | Geosynthetic barriers - Test method for determining the resistance to roots |
ISO 856:2006 | Oil of peppermint (Mentha x piperita L.) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.