|
16/30338194 DC : 0
|
BS 10621 - LOCK ASSEMBLIES IN WHICH THE OPERATING MODE CAN BE SWITCHED BETWEEN THE NORMAL BS 8621 OPERATING MODE AND A SECURE MODE IN WHICH NO EGRESS IS POSSIBLE |
|
BS EN 15651-2:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for glazing |
|
DIN EN 54-3:2014-09
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS |
|
BS EN 12004-1:2017
|
Adhesives for ceramic tiles Requirements, assessment and verification of constancy of performance, classification and marking |
|
S.R. 21:2014
|
GUIDANCE ON THE USE OF I.S. EN 13242:2002 +A1:2007 AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION |
|
UNE-EN 14306:2017
|
Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification |
|
BS EN 16034:2014
|
Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics |
|
BS 8541-6:2015
|
Library objects for architecture, engineering and construction Product and facility declarations. Code of practice |
|
15/30324904 DC : 0
|
BS EN 14037-1 - FREE HANGING HEATING AND COOLING SURFACES FOR WATER WITH A TEMPERATURE BELOW 120 DEGREES C - PART 1: PRE-FABRICATED CEILING MOUNTED RADIANT PANELS FOR SPACE HEATING - TECHNICAL SPECIFICATIONS AND REQUIREMENTS |
|
16/30338192 DC : 0
|
BS 8621 - LOCK ASSEMBLIES OPERATED BY KEY FROM THE OUTSIDE OF THE DOOR AND BY HANDLE OR THUMB TURN FROM THE INSIDE OF THE DOOR |
|
BS EN 12966:2014
|
ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
|
BS EN 16687:2015
|
Construction products. Assessment of release of dangerous substances. Terminology |
|
I.S. EN 16687:2015
|
CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - TERMINOLOGY |
|
CEN/CENELEC GUIDE 33 : 2016
|
GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN TESTING STANDARDS |
|
I.S. EN 13282-3:2015
|
HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION |
|
I.S. EN 15643-5:2017
|
SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK ON SPECIFIC PRINCIPLES AND REQUIREMENT FOR CIVIL ENGINEERING WORKS |
|
BS EN 50575 : 2014
|
POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
|
PREN 15650 : DRAFT 2017
|
VENTILATION FOR BUILDINGS - FIRE DAMPERS |
|
17/30353876 DC : 0
|
BS EN 1463-3 - ROAD MARKING MATERIALS - PART 3: ACTIVE ROAD STUDS |
|
17/30357407 DC : 0
|
BS EN 997 - WC PANS AND WC SUITES WITH INTEGRAL TRAP |
|
BS EN 13108-3:2016
|
Bituminous mixtures. Material specifications Soft Asphalt |
|
UNE-EN 60695-8-2:2017
|
Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods |
|
BS EN 13160-4:2003
|
Leak detection systems Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces |
|
EN 50575:2014/A1:2016
|
POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
|
EN 13160-3:2016
|
Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
|
EN 60695-8-2:2017
|
Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods |
|
BS 10621:2017
|
Lock assemblies in which the operating mode can be switched between the normal BS 8621 operating mode and a secure mode in which no egress is possible |
|
15/30315087 DC : DRAFT MAY 2015
|
BS EN 14314 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
|
S.R. 82:2017
|
SLATING AND TILING - CODE OF PRACTICE |
|
BS EN 16475-2:2017
|
Chimneys. Accessories Chimney fans. Requirements and test methods |
|
BS EN 15501:2013
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXPANDED PERLITE (EP) AND EXFOLIATED VERMICULITE (EV) PRODUCTS - SPECIFICATION |
|
DIN EN 54-26:2015-11
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS |
|
DIN EN 54-29:2015-06
|
Fire detection and fire alarm systems - Part 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors |
|
BS EN 16497-2:2017
|
Chimneys. Concrete System Chimneys Balanced flue applications |
|
PREN 15501 : DRAFT 2015
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXPANDED PERLITE (EP) AND EXFOLIATED VERMICULITE (EV) PRODUCTS - SPECIFICATION |
|
BS 7543:2015
|
GUIDE TO DURABILITY OF BUILDINGS AND BUILDING ELEMENTS, PRODUCTS AND COMPONENTS |
|
BS EN 14303 : 2009
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
|
EN 15129:2018 (edition 2)
|
Anti-seismic devices |
|
S.R. CEN/TR 16797-1:2015
|
CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - GUIDANCE ON THE STATISTICAL ASSESSMENT OF DECLARED VALUES - PART 1: PRINCIPLES AND RULES OF APPLICATION |
|
I.S. EN 15129:2009
|
ANTI-SEISMIC DEVICES |
|
PREN 14314 : DRAFT 2015
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
|
PREN 12150-2 : DRAFT 2017
|
GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: PRODUCT STANDARD |
|
DIN EN 54-30 E : 2015
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 30: MULTISENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF CARBON MONOXIDE AND HEAT SENSORS |
|
UNE-EN 14399-1:2016
|
High-strength structural bolting assemblies for preloading - Part 1: General requirements |
|
BS EN 15651-3:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for sanitary joints |
|
PREN 13813 : DRAFT 2017
|
SCREED MATERIAL AND FLOOR SCREEDS - SCREED MATERIAL - PROPERTIES AND REQUIREMENTS |
|
BS EN 15814 : 2011
|
POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
|
BS EN 14304 : 2009
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
|
14/30303797 DC : 0
|
BS EN 438-7 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
|
UNE-EN 15048-1:2018
|
Non-preloaded structural bolting assemblies - Part 1: General requirements |
|
I.S. EN 15814:2011
|
POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
|
I.S. EN 16361:2013
|
POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOORSETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION |
|
PREN 14449 : DRAFT 2017
|
GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PRODUCT STANDARD |
|
DIN EN 197-2:2014-05
|
CEMENT - PART 2: CONFORMITY EVALUATION |
|
DIN EN ISO 16000-32:2014-10
|
INDOOR AIR - PART 32: INVESTIGATION OF BUILDINGS FOR THE OCCURRENCE OF POLLUTANTS (ISO 16000-32:2014) |
|
BS EN 14399-1:2015
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
|
DIN EN 752:2015-10 (Draft)
|
DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT |
|
I.S. EN 13160-3:2016
|
LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
|
DIN EN 54-3:2001-10
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS |
|
I.S. EN 14037-1:2016
|
FREE HANGING HEATING AND COOLING SURFACES FOR WATER WITH A TEMPERATURE BELOW 120 DEGREES C - PART 1: PRE-FABRICATED CEILING MOUNTED RADIANT PANELS FOR SPACE HEATING - TECHNICAL SPECIFICATIONS AND REQUIREMENTS |
|
DIN EN 197-2:2000-11
|
CEMENT - PART 2: CONFORMITY EVALUATION |
|
I.S. EN 442-1:2014
|
RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS |
|
I.S. EN 14399-1:2015
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
|
VDI 6012 Blatt 2.1:2015-12
|
Integration of distributed and renewables-based energy systems in buildings - Thermic systems - Biomass firing systems |
|
DIN EN 16497-1:2015-05
|
CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
|
DIN EN 54-27 E : 2015
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 27: DUCT SMOKE DETECTORS |
|
PREN 997 : DRAFT 2017
|
WC PANS AND WC SUITES WITH INTEGRAL TRAP |
|
PREN 1125 : DRAFT 2016
|
BUILD HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
|
PD CEN/TR 14245:2014
|
CEMENT - GUIDELINES FOR THE APPLICATION OF EN 197-2 CONFORMITY EVALUATION |
|
FD CEN/TR 17068 : 2017 FD
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - GUIDANCE FOR CE MARKING AND DECLARATION OF PERFORMANCE (DOP) |
|
PD CEN/TR 17105:2017
|
CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - GUIDANCE ON THE USE OF ECOTOXICITY TESTS APPLIED TO CONSTRUCTION PRODUCTS |
|
DIN EN 54-26 E : 2015
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS |
|
S.R. CEN/TR 14245:2014
|
CEMENT - GUIDELINES FOR THE APPLICATION OF EN 197-2 CONFORMITY EVALUATION |
|
I.S. EN 12966:2014
|
ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
|
PREN 1463-3 : DRAFT 2017
|
ROAD MARKING MATERIALS - PART 3: ACTIVE ROAD STUDS |
|
S.R. CEN/TR 17105:2017
|
CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - GUIDANCE ON THE USE OF ECOTOXICITY TESTS APPLIED TO CONSTRUCTION PRODUCTS |
|
PREN 438-7 : DRAFT 2014
|
HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
|
PREN 179 : DRAFT 2016
|
BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
|
CEN/TR 17005:2016
|
Sustainability of construction works - Additional environmental impact categories and indicators - Background information and possibilities - Evaluation of the possibility of adding environmental impact categories and related indicators and calculation methods for the assessment of the environmental performance of buildings |
|
EN 54-12:2015
|
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam |
|
EN 12004-1:2017
|
Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking |
|
CEN/TR 17113:2017
|
Construction products - Assessment of release of dangerous substances - Radiation from construction products - Dose assessment of emitted gamma radiation |
|
UNE-EN ISO 16000-32:2015
|
Indoor air - Part 32: Investigation of buildings for the occurrence of pollutants (ISO 16000-32:2014) |
|
EN 14037-1:2016 (edition 2)
|
Free hanging heating and cooling surfaces for water with a temperature below 120C - Part 1: Pre-fabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements |
|
DIN EN 13282-3:2015-06
|
HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION |
|
I.S. EN 752:2017
|
DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT |
|
UNI CEN/TR 14245 : 2015
|
CEMENT - GUIDELINES FOR THE APPLICATION OF EN 197-2 CONFORMITY EVALUATION |
|
16/30338190 DC : 0
|
BS 3621 - LOCK ASSEMBLIES OPERATED BY KEY FROM BOTH THE INSIDE AND OUTSIDE OF THE DOOR |
|
I.S. 888:2016
|
CODE OF PRACTICE FOR THE PROCUREMENT AND USE OF UNBOUND GRANULAR FILL HARDCORE MATERIAL FOR USE UNDER CONCRETE FLOORS |
|
17/30296747 DC : 0
|
BS EN 15650 - VENTILATION FOR BUILDINGS - FIRE DAMPERS |
|
DIN EN 15814 E : 2015
|
POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
|
BS EN 14308:2015
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
|
BS EN 14306:2015
|
Thermal insulation products for building equipment and industrial installations. Factory made calcium silicate (CS) products. Specification |
|
PD CEN/TR 17113:2017
|
CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - RADIATION FROM CONSTRUCTION PRODUCTS - DOSE ASSESSMENT OF EMITTED GAMMA RADIATION |
|
DIN EN 15814:2015-03
|
POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
|
PREN 14037-1 : DRAFT 2015
|
FREE HANGING HEATING AND COOLING SURFACES FOR WATER WITH A TEMPERATURE BELOW 120 DEGREES C - PART 1: PRE-FABRICATED CEILING MOUNTED RADIANT PANELS FOR SPACE HEATING - TECHNICAL SPECIFICATIONS AND REQUIREMENTS |
|
PREN 14592 : DRAFT 2017
|
TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
|
DIN EN 16497-1 E : 2015
|
CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
|
15/30315096 DC : DRAFT MAY 2015
|
BS EN 15501 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXPANDED PERLITE (EP) AND EXFOLIATED VERMICULITE (EV) PRODUCTS - SPECIFICATION |
|
BS EN 13616-1:2016
|
Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices with closure device |
|
PREN 14179-2 : DRAFT 2017
|
GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: PRODUCT STANDARD |
|
S.R. CEN/TR 17005:2016
|
SUSTAINABILITY OF CONSTRUCTION WORKS - ADDITIONAL ENVIRONMENTAL IMPACT CATEGORIES AND INDICATORS - BACKGROUND INFORMATION AND POSSIBILITIES - EVALUATION OF THE POSSIBILITY OF ADDING ENVIRONMENTAL IMPACT CATEGORIES AND RELATED INDICATORS AND CALCULATION METHODS FOR THE ASSESSMENT OF THE ENVIRONMENTAL PERFORMANCE OF BUILDINGS |
|
S.R. CEN/TR 17113:2017
|
CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - RADIATION FROM CONSTRUCTION PRODUCTS - DOSE ASSESSMENT OF EMITTED GAMMA RADIATION |
|
16/30343246 DC : 0
|
BS EN 1125 - BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
|
BS EN 15643-5:2017
|
SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK ON SPECIFIC PRINCIPLES AND REQUIREMENT FOR CIVIL ENGINEERING WORKS |
|
16/30344387 DC : 0
|
BS EN 16475-1 - CHIMNEYS - ACCESSORIES - PART 1: CHIMNEY SILENCERS - REQUIREMENTS AND TEST METHODS |
|
DIN EN 12966:2015-03
|
ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
|
DIN EN 15048-1:2016-09
|
NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
|
DIN EN 442-1:2015-03
|
RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS |
|
BS EN 54-12:2015
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS - LINE DETECTORS USING AN OPTICAL BEAM |
|
BS EN 442-1:2014
|
RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS |
|
BS EN 60695-8-2:2017
|
FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS |
|
UNE-EN 14037-1:2017
|
Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 1: Pre-fabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements |
|
UNE-EN 13160-3:2017
|
Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
|
CEN/TR 14245:2014
|
Cement - Guidelines for the application of EN 197-2 Conformity Evaluation |
|
ISO 16000-32:2014
|
Indoor air Part 32: Investigation of buildings for the occurrence of pollutants |
|
UNE-EN 12209:2017
|
Building hardware - Mechanically operated locks and locking plates - Requirements and test methods |
|
BS EN ISO 16000-32:2014
|
INDOOR AIR - PART 32: INVESTIGATION OF BUILDINGS FOR THE OCCURRENCE OF POLLUTANTS (ISO 16000-32:2014) |
|
BS EN 14037-1:2016
|
Free hanging heating and cooling surfaces for water with a temperature below 120C Pre-fabricated ceiling mounted radiant panels for space heating. Technical specifications and requirements |
|
BS EN 14680:2015
|
ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
|
EN 14308:2015
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
|
EN 15651-2:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing |
|
EN 54-26:2015
|
Fire detection and fire alarm systems - Part 26: Carbon monoxide detectors - Point detectors |
|
EN 14306:2015
|
Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification |
|
EN 14399-1:2015
|
High-strength structural bolting assemblies for preloading - Part 1: General requirements |
|
EN 16034:2014
|
Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics |
|
EN 16687:2015
|
Construction products - Assessment of release of dangerous substances - Terminology |
|
EN 14891:2017
|
Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
|
EN 15814:2011+A2:2014
|
Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
|
EN 752:2017
|
Drain and sewer systems outside buildings - Sewer system management |
|
EN 15651-3:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints |
|
EN 14304:2015
|
Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification |
|
EN 16361:2013+A1:2016
|
Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation |
|
EN 14680:2015
|
Adhesives for non-pressure thermoplastics piping systems - Specifications |
|
EN 16475-2:2017
|
Chimneys - Accessories - Part 2: Chimney fans - Requirements and test methods |
|
EN 494:2012+A1:2015
|
Fibre-cement profiled sheets and fittings - Product specification and test methods |
|
EN 998-2:2016
|
Specification for mortar for masonry - Part 2: Masonry mortar |
|
EN 16497-1:2015
|
Chimneys - Concrete System Chimneys - Part 1: Non-balanced flue applications |
|
EN ISO 16000-32:2014
|
Indoor air - Part 32: Investigation of buildings for the occurrence of pollutants (ISO 16000-32:2014) |
|
EN 15501:2015
|
Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification |
|
EN 14303:2015
|
Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification |
|
EN 442-1:2014
|
Radiators and convectors - Part 1: Technical specifications and requirements |
|
EN 15651-1:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements |
|
BS EN 13616-2:2016
|
Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices without a closure device |
|
BS EN 13282-3:2013
|
HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION |
|
I.S. EN 16497-1:2015
|
CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
|
DIN EN 54-30:2015-11
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 30: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF CARBON MONOXIDE AND HEAT SENSORS |
|
BS EN 54-29:2015
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 29: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE AND HEAT SENSORS |
|
DIN EN 54-27:2015-05
|
Fire detection and fire alarm systems - Part 27: Duct smoke detectors |
|
BS EN 54-26:2015
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS |
|
PD CEN/TR 16797-1:2015
|
CONSTRUCTION PRODUCTS: ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - GUIDANCE ON THE STATISTICAL ASSESSMENT OF DECLARED VALUES - PART 1: PRINCIPLES AND RULES OF APPLICATION |
|
CEN/TR 16797-1:2015
|
Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 1: Principles and rules of application |
|
UNE-EN 15501:2017
|
Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification |
|
16/30343249 DC : 0
|
BS EN 179 - BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
|
EN 15643-5:2017
|
Sustainability of construction works - Sustainability assessment of buildings and civil engineering works - Part 5: Framework on specific principles and requirement for civil engineering works |
|
BS EN 15651-1:2017
|
Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for facade elements |
|
EN 14428:2015
|
Shower enclosures - Functional requirements and test methods |
|
CEN/CLC Guide 28:2014
|
Guidelines for the public access of Eurocodes and their National Annexes and Harmonized European Standards under the Construction Products Regulation |
|
BS EN 14313 : 2009
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
|
CEN/TR 17105:2017
|
Construction products - Assessment of release of dangerous substances - Guidance on the use of ecotoxicity tests applied to construction products |
|
UNE-EN 12966:2015
|
Road vertical signs - Variable message traffic signs |
|
EN 15651-4:2017/AC:2017
|
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
|
DIN EN 14399-1:2015-04
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
|
BS EN 13108-6:2016
|
Bituminous mixtures. Material specifications Mastic Asphalt |
|
BS EN 14891:2017
|
Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
|
BS 3621:2017
|
Lock assemblies operated by key from both the inside and outside of the door |
|
EN 12966:2014
|
Road vertical signs - Variable message traffic signs |
|
EN 13108-6:2016
|
Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt |
|
EN 13108-3:2016
|
Bituminous mixtures - Material specifications - Part 3: Soft Asphalt |
|
BS 8621:2017
|
Lock assemblies operated by key from the outside of the door and by handle or thumb turn from the inside of the door |
|
DIN EN 54-28:2016-07
|
Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors |
|
EN 12209:2016
|
Building hardware - Mechanically operated locks and locking plates - Requirements and test methods |
|
EN 13282-3:2015
|
Hydraulic road binders - Part 3: Conformity evaluation |