• There are no items in your cart

ANSI/AAMI/ISO 16142-2:2017

Current
Current

The latest, up-to-date edition.

MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2017

Glossary of equivalent standards
Committee representation
Background of ANSI/AAMI adoption
 of ISO 16142-2:2017
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Essential principles of safety and performance
  of IVD medical devices
5 Use of standards and guides in support
  of the essential principles
6 Essential principles and references to
  relevant standards and guides
Annex A (informative) - Rationale and guidance
Annex B (normative) - Table relating essential
        principles to standards
Annex C (informative) - Website listings of other
        standards suitable for the medical device
        sector and for assessment purposes
Annex D (informative) - Reference to the essential
        principles by International Standards
Annex E (informative) - Terminology - Alphabetized
        index of defined terms
Bibliography

Covers the essential principles of safety and performance, identifies significant standards and guides that can be used in the assessment of conformity of a medical device to the recognized essential principles that when met, indicate a medical device is safe and performs as intended.

DevelopmentNote
Supersedes AAMI ISO TIR 16142. (08/2017)
DocumentType
Guide
ISBN
978-1-57020-671-9
Pages
56
PublisherName
Association for the Advancement of Medical Instrumentation
Status
Current
Supersedes

Standards Relationship
ISO 16142-2:2017 Identical

ISO/TS 13004:2013 Sterilization of health care products — Radiation — Substantiation of selected sterilization dose: Method VDmaxSD
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO/IEC 17000:2004 Conformity assessment Vocabulary and general principles
CLSI MM3 A3 : 3ED 2015 MOLECULAR DIAGNOSTIC METHODS FOR INFECTIOUS DISEASES
ISO 15195:2003 Laboratory medicine Requirements for reference measurement laboratories
ISO 15194:2009 In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for certified reference materials and the content of supporting documentation
ISO 22870:2016 Point-of-care testing (POCT) — Requirements for quality and competence
ISO/TR 24971:2013 Medical devices Guidance on the application of ISO 14971
IEC TR 80001-2-5:2014 Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance on distributed alarm systems
EN 13641:2002 Elimination or reduction of risk of infection related to in vitro diagnostic reagents
ISO 15882:2008 Sterilization of health care products — Chemical indicators — Guidance for selection, use and interpretation of results
ISO 11135:2014 Sterilization of health-care products Ethylene oxide Requirements for the development, validation and routine control of a sterilization process for medical devices
IEC 61326-2-6:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment
CLSI POCT4 A2 : 2ED 2006 POINT-OF-CARE IN VITRO DIAGNOSTIC (IVD) TESTING
EN 13612:2002/AC:2002 PERFORMANCE EVALUATION OF IN VITRO DIAGNOSTIC MEDICAL DEVICES
IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
CLSI MM16 A : 1ED 2006 USE OF EXTERNAL RNA CONTROLS IN GENE EXPRESSION ASSAYS
ISO 15193:2009 In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for content and presentation of reference measurement procedures
CLSI MM6 A2 : 2ED 2010 QUANTITATIVE MOLECULAR METHODS FOR INFECTIOUS DISEASES
CLSI EP5 A3 : 3ED 2014 Evaluation of Precision of Quantitative Measurement Procedures; Approved Guideline—Third Edition<br>
CLSI MM9 A2 : 2ED 2014 NUCLEIC ACID SEQUENCING METHODS IN DIAGNOSTIC LABORATORY MEDICINE
CLSI MM17 A : 1ED 2008 VERIFICATION AND VALIDATION OF MULTIPLEX NUCLEIC ACID ASSAYS
ISO 31000:2009 Risk management Principles and guidelines
ISO 13485:2016 Medical devices Quality management systems Requirements for regulatory purposes
CLSI EP26 A : 1ED 2013 USER EVALUATION OF BETWEEN-REAGENT LOT VARIATION
EN 14136:2004 Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures
ISO 16142-1:2016 Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
ISO 14937:2009 Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
CLSI EP12 A2 : 2ED 2008 USER PROTOCOL FOR EVALUATION OF QUALITATIVE TEST PERFORMANCE
ISO 25424:2009 Sterilization of medical devices Low temperature steam and formaldehyde Requirements for development, validation and routine control of a sterilization process for medical devices
CLSI EP6 A : 1ED 2003 EVALUATION OF THE LINEARITY OF QUANTITATIVE MEASUREMENT PROCEDURES - A STATISTICAL APPROACH
ISO/TS 19218-1:2011 Medical devices Hierarchical coding structure for adverse events Part 1: Event-type codes
ISO 18153:2003 In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values for catalytic concentration of enzymes assigned calibrators and control materials
ISO/IEC Guide 63:2012 Guide to the development and inclusion of safety aspects in International Standards for medical devices
ASTM F 2027 : 2016 : REDLINE Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products
CLSI I/LA18 A2 : 2ED 2001 SPECIFICATIONS FOR IMMUNOLOGICAL TESTING FOR INFECTIOUS DISEASES
CLSI MM22 A : 1ED 2014 MICROARRAYS FOR DIAGNOSIS AND MONITORING OF INFECTIOUS DISEASES
ISO 23640:2011 In vitro diagnostic medical devices — Evaluation of stability of in vitro diagnostic reagents
ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
ISO 17511:2003 In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values assigned to calibrators and control materials
IEC 62304:2006+AMD1:2015 CSV Medical device software - Software life cycle processes
ISO 18472:2006 Sterilization of health care products Biological and chemical indicators Test equipment
IEC TR 60878:2015 Graphical symbols for electrical equipment in medical practice
ISO 20857:2010 Sterilization of health care products Dry heat Requirements for the development, validation and routine control of a sterilization process for medical devices
ASTM F 2761 : 2009 : R2013 Medical Devices and Medical Systems - Essential safety requirements for equipment comprising the patient-centric integrated clinical environment (ICE) - Part 1: General requirements and conceptual model
ISO 16256:2012 Clinical laboratory testing and in vitro diagnostic test systems Reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
ISO 14001:2015 Environmental management systems — Requirements with guidance for use
EN 13532:2002 General requirements for in vitro diagnostic medical devices for self-testing
CLSI POCT12 A3 : 3ED 2013 Point-of-Care Blood Glucose Testing in Acute and Chronic Care Facilities; Approved Guideline—Third Edition<br>
ISO 9001:2015 Quality management systems — Requirements
IEC 62471:2006 Photobiological safety of lamps and lamp systems
ISO 17593:2007 Clinical laboratory testing and in vitro medical devices Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
ISO/IEC Guide 2:2004 Standardization and related activities General vocabulary
CLSI MM12 A : 1ED 2006 DIAGNOSTIC NUCLEIC ACID MICROARRAYS
ISO 14971:2007 Medical devices Application of risk management to medical devices
ISO 14161:2009 Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results
CLSI EP7 A2 : 2ED 2005 INTERFERENCE TESTING IN CLINICAL CHEMISTRY
IEC TR 80001-2-1:2012 Application of risk management for IT-networks incorporating medical devices - Part 2-1: Step by step risk management of medical IT-networks - Practical applications and examples
ISO 15223-1:2016 Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements
ISO 15197:2013 In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
IEC 60601-1-9:2007+AMD1:2013 CSV Medical electrical equipment - Part 1-9: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design
CLSI M53 A : 1ED 2011 CRITERIA FOR LABORATORY TESTING AND DIAGNOSIS OF HUMAN IMMUNODEFICIENCY VIRUS INFECTION
IEC 60799:1998 Electrical accessories - Cord sets and interconnection cord sets

View more information
US$266.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.