|
ISO 1514 : 2016
|
PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING |
|
ISO 7724-1 : 1984
|
PAINTS AND VARNISHES - COLORIMETRY - PART 1: PRINCIPLES |
|
STANAG 1162 : 0
|
VERTICAL REPLENISHMENT VERTREP OPERATING AREA MARKING CLEARANCES AND LIGHTING |
|
ISO 8502-3 : 2017
|
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 3: ASSESSMENT OF DUST ON STEEL SURFACES PREPARED FOR PAINTING (PRESSURE-SENSITIVE TAPE METHOD) |
|
ISO 3233 : 1998
|
PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE DENSITY OF A DRIED COATING |
|
ISO 8502-4 : 2017
|
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 4: GUIDANCE ON THE ESTIMATION OF THE PROBABILITY OF CONDENSATION PRIOR TO PAINT APPLICATION |
|
ISO 8501-1 : 2007(R2017)
|
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PART 1: RUST GRADES AND PREPARATION GRADES OF UNCOATED STEEL SUBSTRATES AND OF STEEL SUBSTRATES AFTER OVERALL REMOVAL OF PREVIOUS COATINGS |
|
ISO 12944-6 : 1998
|
PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS |
|
ISO 3549 : 1995(R2016)
|
ZINC DUST PIGMENT FOR PAINTS - SPECIFICATIONS AND TEST METHODS |
|
ISO 6745 : 1990(R2017)
|
ZINC PHOSPHATE PIGMENTS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST |
|
ISO 3001 : 1999(R2014)
|
PLASTICS - EPOXY COMPOUNDS - DETERMINATION OF EPOXY EQUIVALENT |
|
ISO 8503-2 : 2012(R2017)
|
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 2: METHOD FOR THE GRADING OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL - COMPARATOR PROCEDURE |
|
ASTM D 1141 : 1998 : EDT 1
|
Standard Practice for the Preparation of Substitute Ocean Water |
|
ISO 12944-5 : 2007
|
PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS |
|
ISO 2808 : 2007(R2010)
|
PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS |
|
STANAG 1278 : 2017
|
STANDARD FOR THE REQUIRED LEVEL AND MEASUREMENT OF COEFFICIENT OF FRICTION ON FLIGHT DECKS |
|
ISO 7724-2 : 1984
|
PAINTS AND VARNISHES - COLORIMETRY - PART 2: COLOUR MEASUREMENT |
|
ISO 11507 : 2007
|
PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER |
|
BS 381C(1996) : 1996
|
SPECIFICATION FOR COLOURS FOR IDENTIFICATION, CODING AND SPECIAL PURPOSES |
|
ISO 8501-3 : 2006(R2014)
|
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PART 3: PREPARATION GRADES OF WELDS, CUT EDGES AND OTHER AREAS WITH SURFACE IMPERFECTIONS |
|
ISO 6270 : 1980
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMIDITY (CONTINUOUS CONDENSATION) |
|
ISO 3678 : 1976
|
PAINTS AND VARNISHES - PRINT FREE TEST |
|
ISO 9117 : 1990
|
PAINTS AND VARNISHES - DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME - METHOD TEST |
|
ISO 3679 : 2015
|
DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
|
ISO 2811 : 1974
|
PAINTS AND VARNISHES - DETERMINATION OF DENSITY |
|
ISO 4628-4 : 2016
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 4: ASSESSMENT OF DEGREE OF CRACKING |
|
ISO 11909 : 2007(R2016)
|
BINDERS FOR PAINTS AND VARNISHES - POLYISOCYANATE RESINS - GENERAL METHODS OF TEST |
|
ISO 4628-3 : 2016
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 3: ASSESSMENT OF DEGREE OF RUSTING |
|
STANAG 4602 : 2004
|
FIRE ASSESSMENT OF MATERIALS |
|
ISO 2810 : 2004(R2018)
|
PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - EXPOSURE AND ASSESSMENT |
|
ISO 7724-3 : 1984
|
PAINTS AND VARNISHES - COLORIMETRY - PART 3: CALCULATION OF COLOUR DIFFERENCES |
|
ISO 4624 : 2016
|
PAINTS AND VARNISHES - PULL-OFF TEST FOR ADHESION |
|
ISO 12944-2 : 2017
|
PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 2: CLASSIFICATION OF ENVIRONMENTS |
|
ISO 12944-1 : 2017
|
PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 1: GENERAL INTRODUCTION |
|
ISO 11890-1 : 2007(R2016)
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
|
ISO 11908 : 1996(R2018)
|
BINDERS FOR PAINTS AND VARNISHES - AMINO RESINS - GENERAL METHODS OF TEST |
|
ISO 4628-5 : 2016
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 5: ASSESSMENT OF DEGREE OF FLAKING |
|
ISO 4628-1 : 2016
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM |
|
ISO 8044 : 2015
|
CORROSION OF METALS AND ALLOYS - BASIC TERMS AND DEFINITIONS |
|
MIL STD 1623 : E
|
FIRE PERFORMANCE REQUIREMENTS AND APPROVED SPECIFICATIONS FOR INTERIOR FINISH MATERIALS AND FURNISHINGS (NAVAL SHIPBOARD USE) |
|
ISO 1248 : 2006(R2015)
|
IRON OXIDE PIGMENTS - SPECIFICATIONS AND METHODS OF TEST |
|
MIL F 24385 : F
|
FIRE EXTINGUISHING AGENT, AQUEOUS FILM FORMING FOAM, (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEA WATER |
|
ISO 3682 : 1996
|
BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF ACID VALUE - TITRIMETRIC METHOD |
|
ISO 4618 : 2014
|
PAINTS AND VARNISHES - TERMS AND DEFINITIONS |
|
ISO 9227 : 2017
|
CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS |
|
ISO 3251 : 2008(R2011)
|
PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE-MATTER CONTENT |
|
ISO 4628-6 : 2011(R2017)
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 6: ASSESSMENT OF DEGREE OF CHALKING BY TAPE METHOD |
|
ISO 4629 : 1996
|
BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF HYDROXYL VALUE - TITRIMETRIC METHOD |
|
ISO 8502-6 : 2006(R2011)
|
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 6: EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS - THE BRESLE METHOD |
|
ISO 8503-1 : 2012(R2017)
|
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 1: SPECIFICATIONS AND DEFINITIONS FOR ISO SURFACE PROFILE COMPARATORS FOR THE ASSESSMENT OF ABRASIVE BLAST-CLEANED SURFACES |
|
ISO 3270 : 1984(R2018)
|
PAINTS AND VARNISHES AND THEIR RAW MATERIALS - TEMPERATURES AND HUMIDITIES FOR CONDITIONING AND TESTING |
|
ISO 14680-1 : 2000(R2016)
|
PAINTS AND VARNISHES - DETERMINATION OF PIGMENT CONTENT - PART 1: CENTRIFUGE METHOD |
|
ISO 8502-9 : 1998(R2013)
|
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 9: FIELD METHOD FOR THE CONDUCTOMETRIC DETERMINATION OF WATER-SOLUBLE SALTS |
|
ISO 20340 : 2009
|
PAINTS AND VARNISHES - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES |
|
ISO 11890-2 : 2013
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD |
|
STANAG 1135 : 2017
|
INTERCHANGEABILITY OF FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS USED BY THE ARMED FORCES OF THE NORTH ATLANTIC TREATY NATIONS |
|
ISO 9514 : 2005(R2018)
|
PAINTS AND VARNISHES - DETERMINATION OF THE POT LIFE OF MULTICOMPONENT COATING SYSTEMS - PREPARATION AND CONDITIONING OF SAMPLES AND GUIDELINES FOR TESTING |
|
FED STD 595 : C
|
COLORS USED IN GOVERNMENT PROCUREMENT |
|
ISO 8504-3 : 1993(2008)
|
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE PREPARATION METHODS - PART 3: HAND- AND POWER-TOOL CLEANING |
|
ISO 4628-2 : 2016
|
PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 2: ASSESSMENT OF DEGREE OF BLISTERING |
|
ISO 10601 : 2007
|
MICACEOUS IRON OXIDE PIGMENTS FOR PAINTS - SPECIFICATIONS AND TEST METHODS |
|
ISO 14680-2 : 2000(R2016)
|
PAINTS AND VARNISHES - DETERMINATION OF PIGMENT CONTENT - PART 2: ASHING METHOD |