Elbow, Tube to Hose, 90 Degrees

Available format(s)

PDF

Published date

06-07-2011

Publisher

US Military Specs/Standards/Handbooks

DevelopmentNote	Inactive for New Design. (04/2013)
DocumentType	Standard
Pages	14
PublisherName	US Military Specs/Standards/Handbooks
Status	Current

SAE AS 4396 : 2013	FITTING END, BULKHEAD, FLARED TUBE CONNECTION, DESIGN STANDARD
SAE AMS 5645 : 2016	STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
SAE AMS QQ A 225/9 : 2014	ALUMINUM ALLOY 7075, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED
SAE AS 611F : 2010	HOSE ASSEMBLY AND TUBING, POLYTETRAFLUOROETHYLENE, CLEANING METHODS FOR
SAE AMS QQ P 416 : 2016	PLATING, CADMIUM (ELECTRODEPOSITED)
SAE AMS 4133 : 2014	ALUMINUM ALLOY FORGINGS AND ROLLED RINGS, 4.4CU - 0.85SI - 0.80MN - 0.50MG (2014-T6), SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 2488 : 2000	ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER
SAE AMS 4141 : 2014	ALUMINUM ALLOY DIE FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73), SOLUTION AND PRECIPITATION HEAT TREATED
ASME B46.1 : 2009	SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
SAE AMS 5648 : 2016	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
SAE AMS QQ A 367 : 2012	ALUMINUM ALLOY FORGINGS
MIL-DTL-83488 Revision D:1999	COATING, ALUMINUM, HIGH PURITY
SAE AMS QQ S 763D : 2013(S2015)	STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS
SAE AS 5181 : 2015	FITTING, ELBOW, 90°, BULKHEAD, FLARED TO HOSE
SAE AS 8879 : 2004	SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER
SAE ARP 1590 : 2014	RECOMMENDED PART NUMBERING GUIDELINES FOR FLUID SYSTEM COMPONENTS INCH SYSTEM OF MEASUREMENTS
MIL A 8625 : F	ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
SAE AMS 2472 : 2014	ANODIC TREATMENT OF ALUMINUM ALLOYS, SULFURIC ACID PROCESS, DYED COATING
SAE AMS 2700E : 2011	PASSIVATION OF CORROSION RESISTANT STEELS
SAE AMS 5639 : 2017	STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
SAE AS 5132 : 2015	FITTING END - HOSE CONNECTION, DESIGN STANDARD
SAE AS 4843/1 : 2016	FITTINGS, BEADED TO 37 DEGREES FLARED, FLUID CONNECTION
SAE AMS QQ A 225/6 : 1998	ALUMINUM ALLOY, 2024, BAR, ROD, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED
SAE AMS 4339 : 2004	ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS 4.4CU - 1.5MG - 0.60MN (2024-T-851) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED
SAE AMS 4124 : 2012	ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED
MS21344 Revision A:2016	FITTING INSTALLATION OF FLARED TUBE STRAIGHT THREADED CONNECTORS DESIGN STANDARD FOR