|
ISO 16750-2:2012
|
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads
|
|
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories
|
|
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION)
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
|
|
IEEE 299-2006
|
IEEE Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures
|
|
ISO 16750-1:2006
|
Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 1: General
|
|
ISO 7637-1:2015
|
Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations
|
|
CISPR 16-1-1:2015
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
|
|
IEEE/ANSI C63.12-1999
|
American National Standard for Electromagnetic Compatibility Limits--Recommended Practice
|
|
IEC 61000-4-11:2004+AMD1:2017 CSV
|
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
|
|
IEEE/ANSI C63.27-2017
|
American National Standard for Evaluation of Wireless Coexistence
|
|
IEEE/ANSI C63.18-2014 REDLINE
|
American National Standard Recommended Practice for an On-Site, Ad Hoc Test Method for Estimating Electromagnetic Immunity of Medical Devices to Radiated Radio-Frequency (RF) Emissions from RF Transmitters
|
|
ISO 7637-2:2011
|
Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only
|
|
IEEE 1309-2013 REDLINE
|
IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz
|
|
IEC 61000-6-1 : 3.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
|
|
IEEE/ANSI C63.14-2009
|
American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3)
|
|
IEC 61000-4-4:2012 RLV
|
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
|
|
IEC 61000-4-39:2017
|
Electromagnetic compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test
|
|
MIL-HDBK-454 Revision B:2007
|
GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT
|
|
IEC 61000-4-6 : 4.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
|
|
IEC 61000-4-6:2013
|
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
|
|
IEEE 299.1-2013
|
IEEE Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having all Dimensions between 0.1 m and 2 m
|
|
IEC 60601-1-2:2014
|
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests
|
|
CEA 544 : C2010(R2014)
|
LOW FREQUENCY IMMUNITY OF TUNERS IN A CABLE SYSTEM
|
|
SAE J 1113/1 : 2013
|
ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR COMPONENTS OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (EXCEPT AIRCRAFT) (16.6 HZ TO 18 GHZ)
|
|
IEEE/ANSI C63.14-2014 REDLINE
|
American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3)
|
|
MIL-STD-461 Revision G:2015
|
REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
|
|
IEEE C63.2-2009
|
American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications
|
|
IEC TR 60601-4-2:2016
|
Medical electrical equipment - Part 4-2: Guidance and interpretation - Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems
|
|
SAE J 1113/26 : 2014
|
ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - IMMUNITY TO AC POWER LINE ELECTRIC FIELDS
|
|
IEC 61000-4-20:2010
|
Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
|
|
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
|
|
IEEE C95.1-2005
|
IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz
|
|
TIA 631 : B2011(R2017)
|
TELECOMMUNICATIONS TELEPHONE TERMINAL EQUIPMENT RADIO FREQUENCY IMMUNITY REQUIREMENTS
|
|
SAE J 1113/22 : 2010
|
ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - PART 22: IMMUNITY TO RADIATED MAGNETIC FIELDS
|
|
RTCA DO 357 : 2014
|
USER GUIDE: SUPPLEMENT TO DO-160G
|
|
IEC 61000-6-1:2016
|
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
|
|
CEA/IS 31 : 1987
|
RECOMMENDED DESIGN GUIDELINE, REJECTION OF EDUCATIONAL INTERFERENCE TO CH 6 TELEVISION RECEPTION
|
|
ISO 11452-9:2012
|
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 9: Portable transmitters
|
|
IEEE 145-2013 REDLINE
|
IEEE Standard for Definitions of Terms for Antennas
|
|
TIA 920 : 2002
|
TELECOMMUNICATIONS TELEPHONE TERMINAL EQUIPMENT TRANSMISSION REQUIREMENTS FOR WIDEBAND DIGITAL WIRELINE TELEPHONES
|
|
IEC 61000-4-21:2011
|
Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.