API STD 17F : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
06-10-2021
English
11-01-2017
1 Scope
2 Normative References
3 Terms, Definitions, Acronyms,
Abbreviations, and Symbols
4 System Requirements
5 Surface Equipment
6 Subsea Equipment
7 Interfaces
8 Materials and Fabrication
9 Testing
10 Marking, Packaging, Storage,
and Shipping
Annex A (normative) - Obsolescence Management
Annex B (normative) - Subsea Electrical and
Optical Connectors and Flying Leads
Annex C (informative) - Property Requirements of
Control Fluids
Annex D (normative) - Analog Devices - SIIS Level 1
Annex E (normative) - Digital Serial Devices - SIIS
Level 2
Annex F (normative) - Intelligent Well Devices, IWIS
Annex G (normative) - Ethernet TCP/IP Devices - SIIS
Level 3
Annex H (normative) - Insulation Resistance (IR)
Testing
Bibliography
Pertains to design, fabrication, testing, installation, and operation of subsea production control systems (SPCSs).
DocumentType |
Standard
|
Pages |
241
|
ProductNote |
NEW CHILD ERR 2 2019 IS ADDED This product is unavailable in Cuba, Iran, North Korea, Syria New child ERR 1 2018 is now added.
|
PublisherName |
American Petroleum Institute
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
IEC TS 60479-1:2005+AMD1:2016 CSV | Effects of current on human beings and livestock - Part 1: Generalaspects |
ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
IEC 60228:2004 | Conductors of insulated cables |
EI GUIDE MGMT. OBSOLESCENCE SUBSEA : 1ED 2011 | GUIDELINES FOR THE MANAGEMENT OF OBSOLESCENCE IN SUBSEA FACILITIES |
ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
ISO/TR 10949:2002 | Hydraulic fluid power Component cleanliness Guidelines for achieving and controlling cleanliness of components from manufacture to installation |
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
ASTM D 665 : 2014-11 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER |
ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
ASTM D 1141 : 1998 : EDT 1 | Standard Practice for the Preparation of Substitute Ocean Water |
ASTM D 1414 : 2015 : REDLINE | Standard Test Methods for Rubber O-Rings |
IEC 60502-1:2004+AMD1:2009 CSV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV(<em>U</em><sub>m</sub> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV) |
ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
IEEE 802.3-2012 | IEEE Standard for Ethernet |
TIA/EIA 568-2 : C2009 AMD 1 2016 | COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR TELECOMMUNICATIONS CABLING AND COMPONENTS STANDARDS |
IEC TS 62239:2008 | Process management for avionics - Preparation of an electronic components management plan |
ISO/IEC 8802-3:2000 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications |
ASME B31.3:2016 | PROCESS PIPING |
IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
NORSOK M 630 : REV 6 | MATERIAL DATA SHEETS AND ELEMENT DATA SHEETS FOR PIPING |
PD 6667:2000 | Obsolescence management. Code of practice for obsolescence notification and support from suppliers of electronic components |
BS 903-C2:1982 | Physical testing of rubber Determination of volume resistivity |
ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
ISO 13357-2:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils |
ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing |
ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
ISO 15611:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
BS 6899:1991 | Specification for rubber insulation and sheath of electric cables |
IEC 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
ISO 8580:1987 | Rubber and plastics hoses Determination of ultra-violet resistance under static conditions |
ISO 3722:1976 | Hydraulic fluid power — Fluid sample containers — Qualifying and controlling cleaning methods |
IEC 62402:2007 | Obsolescence management - Application guide |
IEC 60721-3-2:1997 | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation |
IEC 61300-3-4:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation |
ASTM G 46 : 1994 : R2018 | Standard Guide for Examination and Evaluation of Pitting Corrosion |
EN 10204:2004 | Metallic products - Types of inspection documents |
IEC 60533:2015 | Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull |
BS 7201-2:1995 | Hydraulic fluid power. Gas loaded accumulators Dimensions of gas ports |
IEC 62309:2004 | Dependability of products containing reused parts - Requirements for functionality and tests |
BS EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
ISO 11898-3:2006 | Road vehicles Controller area network (CAN) Part 3: Low-speed, fault-tolerant, medium-dependent interface |
ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
API SPEC 17E : 2017 | SPECIFICATION FOR SUBSEA UMBILICALS |
SAE AS 4059F : 2013 | AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS |
ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding |
ISO 21018-1:2008 | Hydraulic fluid power Monitoring the level of particulate contamination of the fluid Part 1: General principles |
API 17Q : 2010 | RECOMMENDED PRACTICE ON SUBSEA EQUIPMENT QUALIFICATION |
ISO 16889:2008 | Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
DIN 41612-2:1987-10 | TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPES B, C AND D |
ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
AWS D1.1 : 2000 | STRUCTURAL WELDING CODE - STEEL |
ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
ISO 10945:1994 | Hydraulic fluid power Gas-loaded accumulators Dimensions of gas ports |
ISO 4021:1992 | Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system |
API 17O : 2014 | SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
ISO 4405:1991 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the gravimetric method |
API RP 17N : 2017 | RECOMMENDED PRACTICE ON SUBSEA PRODUCTION SYSTEM RELIABILITY, TECHNICAL RISK, AND INTEGRITY MANAGEMENT |
ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
API 17H : 2013 | REMOTELY OPERATED TOOLS AND INTERFACES ON SUBSEA PRODUCTION SYSTEMS |
API 17D : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
ISO 4407:2002 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope |
IEC 60885-2:1987 | Electrical test methods for electric cables. Part 2: Partial discharge tests |
EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.