API 2L :1996
|
RECOMMENDED PRACTICE FOR PLANNING, DESIGNING, AND CONSTRUCTING HELIPORTS FOR FIXED OFFSHORE PLATFORMS
|
CAN/CSA-ISO 19901-4:17
|
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 4: Geotechnical and foundation design considerations (Adopted ISO 19901-4:2016, second edition, 2016-07-15)
|
BS EN 61400-3:2009
|
Wind turbines Design requirements for offshore wind turbines
|
CSA ISO TR 19905-2 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - SITE-SPECIFIC ASSESSMENT OF MOBILE OFFSHORE UNITS - PART 2: JACK-UPS COMMENTARY AND DETAILED SAMPLE CALCULATION
|
PD IEC/TS 62600-10:2015
|
Marine energy. Wave, tidal and other water current converters Assessment of mooring system for marine energy converters (MECs)
|
04/30091601 DC : 0
|
ISO 13628-11 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11 - FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
|
CSA C61400-3 : 2011 : R2016
|
WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
|
NORSOK N 001 : REV 8
|
INTEGRITY OF OFFSHORE STRUCTURES
|
BS EN ISO 13628-1 : 2005
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
|
BS EN ISO 19901-4:2003
|
Petroleum and natural gas industries. Specific requirements for offshore structures Geotechnical and foundation design considerations
|
EN 61400-3:2009
|
Wind turbines - Part 3: Design requirements for offshore wind turbines
|
CEN/TS 13001-3-1:2004/AC:2006
|
CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
|
API MPM CH20.3 : 2013
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20: ALLOCATION MEASUREMENT - SECTION 3: MEASUREMENT OF MULTIPLE FLOW
|
IEC TS 62600-10:2015
|
Marine energy - Wave, tidal and other water current converters - Part 10: Assessment of mooring system for marine energy converters (MECs)
|
UNI EN ISO 13628-15 : 2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS
|
API 2V : 2004
|
DESIGN OF FLAT PLATE STRUCTURES
|
BS EN ISO 13628-15:2011
|
Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds
|
DD CEN/TS 13001-3-1 : 2004
|
CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
|
API 86 : 2005
|
RECOMMENDED PRACTICE FOR MEASUREMENT OF MULTIPHASE FLOW
|
API 2C RUSSIAN : 2004
|
SPECIFICATION FOR OFFSHORE PEDESTAL MOUNTED CRANES
|
I.S. CEN TS 13001-3-1:2005
|
CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
|
API MPMS CHAPTER 20.3 : 2013(R2018)
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20: ALLOCATION MEASUREMENT - SECTION 3: MEASUREMENT OF MULTIPLE FLOW
|
I.S. EN ISO 19902:2007
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
|
NORSOK U-009:2011
|
LIFE EXTENSION FOR SUBSEA SYSTEMS
|
EN ISO 19902:2007/A1:2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES (ISO 19902:2007/AMD 1:2013)
|
BS 7910:2005
|
Guide to methods for assessing the acceptability of flaws in metallic structures
|
BS PD8010-2(2015) : 2015
|
PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE
|
PD 8010-2:2015+A1:2016
|
Pipeline systems Subsea pipelines. Code of practice
|
17/30280269 DC : 0
|
BS EN ISO 19901-9 - PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 9: STRUCTURAL INTEGRITY MANAGEMENT
|
API 2L : 1996 : R2012
|
RECOMMENDED PRACTICE FOR PLANNING, DESIGNING, AND CONSTRUCTING HELIPORTS FOR FIXED OFFSHORE PLATFORMS
|
PD CEN ISO/TR 19905-2:2013
|
Petroleum and natural gas industries. Site-specific assessment of mobile offshore units Jack-ups commentary and detailed sample calculation
|
09/30172965 DC : 0
|
BS EN ISO 13628-15 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS
|
15/30303554 DC : 0
|
BS ISO 18647 - SPECIFICATIONS FOR OFFSHORE MODULAR DRILLING RIGS ON FIXED PLATFORMS
|
DIN EN 1474-3:2009-02
|
INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 3: OFFSHORE TRANSFER SYSTEMS
|
API 2A LRFD : 1993
|
RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - LOAD AND RESISTANCE FACTOR DESIGN
|
CEN ISO/TR 19905-2:2013
|
Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - Part 2: Jack-ups commentary and detailed sample calculation (ISO/TR 19905-2:2012)
|
EN ISO 19901-4:2016
|
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations (ISO 19901-4:2016)
|
API 2FB:2006
|
RECOMMENDED PRACTICE FOR THE DESIGN OF OFFSHORE FACILITIES AGAINST FIRE AND BLAST LOADING
|
NORSOK N 004 : REV 3 AC 2014
|
DESIGN OF STEEL STRUCTURES
|
API 17P : 2013
|
DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS
|
API TR 17TR7 : 2017
|
VERIFICATION AND VALIDATION OF SUBSEA CONNECTORS
|
S.R. CEN ISO/TR 19905-2:2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - SITESPECIFIC ASSESSMENT OF MOBILE OFFSHORE UNITS - PART 2: JACK-UPS COMMENTARY AND DETAILED SAMPLE CALCULATION (ISO/TR 19905-2:2012)
|
EN ISO 13628-1:2005/A1:2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
|
ISO 13628-1:2005
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations
|
BS EN ISO 13626:2004
|
Petroleum and natural gas industries. Drilling and production equipment. Drilling and well-servicing structures
|
ISO 19902:2007
|
Petroleum and natural gas industries Fixed steel offshore structures
|
ISO 13628-15:2011
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds
|
EN ISO 13626 : 2004
|
Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures (ISO 13626:2003)
|
EN ISO 13628-15:2011
|
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011)
|
API 2FB : 2006 : R2012
|
RECOMMENDED PRACTICE FOR THE DESIGN OF OFFSHORE FACILITIES AGAINST FIRE AND BLAST LOADING
|
ABS 0217 : 2017
|
GUIDANCE NOTES ON LIFE EXTENSION METHODOLOGY FOR FLOATING PRODUCTION INSTALLATIONS
|
07/30140820 DC : 0
|
BS ISO 25457 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
|
BS ISO 18647:2017
|
Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms
|
ABS 0228 : 2017 COR 2018
|
GUIDANCE NOTES ON DESIGN AND INSTALLATION OF DYNAMICALLY INSTALLED PILES
|
AWS D3.6M : 2010
|
UNDERWATER WELDING CODE
|
CSA C61400-3 : 2011
|
WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
|
API 2L : 1996 : R2006
|
RECOMMENDED PRACTICE FOR PLANNING, DESIGNING, AND CONSTRUCTING HELIPORTS FOR FIXED OFFSHORE PLATFORMS
|
AWS WHC1.05 : 0
|
WELDING SCIENCE AND TECHNOLOGY, WELDING HANDBOOK, 9TH ED., VOL 1 - CHAPTER 5: DESIGN FOR WELDING
|
I.S. EN ISO 13628-15:2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS (ISO 13628-15:2011)
|
I.S. EN 61400-3:2009
|
WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
|
IEC TS 62600-2:2016
|
Marine energy - Wave, tidal and other water current converters - Part 2: Design requirements for marine energy systems
|
ISO 19901-4:2016
|
Petroleum and natural gas industries Specific requirements for offshore structures Part 4: Geotechnical and foundation design considerations
|
ISO 13626:2003
|
Petroleum and natural gas industries — Drilling and production equipment — Drilling and well-servicing structures
|
UNI EN ISO 19902 : 2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
|