|
ISO 6507-1:2005
|
Metallic materials Vickers hardness test Part 1: Test method
|
|
ASME PV CODE 8 DIV 2 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES
|
|
ISO 2063:2005
|
Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys
|
|
ISO 8502-3:2017
|
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
|
|
API 500 : 2012
|
RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
|
|
ISO 6506-1:2014
|
Metallic materials Brinell hardness test Part 1: Test method
|
|
ISO 8501-1:2007
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
|
|
ASNT SNT TC 1A : 2016
|
TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
|
|
ASTM A 923 : 2014 : REDLINE
|
Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
|
|
ASME PV CODE 9 : 2017
|
BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
|
|
ISO 9712:2012
|
Non-destructive testing Qualification and certification of NDT personnel
|
|
API 5CT : 2012
|
CASING AND TUBING
|
|
ISO 8503-2:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure
|
|
ASTM E 562 : 2011 : REDLINE
|
Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
|
|
SSPC-CS 23.00 : 2016
|
SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL
|
|
ASME PV CODE 8 DIV 1 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
|
|
ISO 6508-1:2016
|
Metallic materials — Rockwell hardness test — Part 1: Test method
|
|
API 6A : 2010
|
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
|
|
ASTM E 384 : 2017 : REDLINE
|
Standard Test Method for Microindentation Hardness of Materials
|
|
API 7K : 2015
|
DRILLING AND WELL SERVICING EQUIPMENT
|
|
ASME B31.3:2016
|
PROCESS PIPING
|
|
ASTM D 4285 : 1983 : R2018
|
Standard Test Method for Indicating Oil or Water in Compressed Air
|
|
ASTM E 10 : 2017-05
|
TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS
|
|
API 6AM : 1995
|
TECHNICAL REPORT ON MATERIAL TOUGHNESS
|
|
API 5L : 2012
|
LINE PIPE
|
|
API SPEC 20E : 2017
|
ALLOY AND CARBON STEEL BOLTING FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES
|
|
AISC 360 : 2016
|
SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS
|
|
API 20F : 2015
|
CORROSION RESISTANT BOLTING FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES
|
|
ASME PV CODE 3 DIV 2 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR THE CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - CODE FOR CONCRETE CONTAINMENTS
|
|
API 2RD : 2013
|
DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS
|
|
API SPEC 16C : 2015
|
CHOKE AND KILL EQUIPMENT
|
|
ISO 4624:2016
|
Paints and varnishes — Pull-off test for adhesion
|
|
API 8C : 2012
|
DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2)
|
|
AISC 303 : 0
|
CODE OF STANDARD PRACTICE FOR STRUCTURAL STEEL BUILDINGS AND BRIDGES
|
|
ISO 11120:2015
|
Gas cylinders Refillable seamless steel tubes of water capacity between 150 l and 3000 l Design, construction and testing
|
|
API RP 16Q : 2017
|
DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS
|
|
API 505 : 1997
|
RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2
|
|
ISO 13625:2002
|
Petroleum and natural gas industries — Drilling and production equipment — Marine drilling riser couplings
|
|
NFPA 70 : 2017
|
NATIONAL ELECTRICAL CODE
|
|
API 9B : 2015
|
APPLICATION, CARE, AND USE OF WIRE ROPE FOR OIL FIELD SERVICE
|
|
NACE WJ 4 : 2012
|
WATERJET CLEANING OF METALS - LIGHT CLEANING
|
|
API 5C3 : 1994
|
BULLETIN ON FORMULAS AND CALCULATIONS FOR CASING, TUBING, DRILL PIPE AND LINE PIPE PROPERTIES
|
|
ASME PV CODE 5 : 2017
|
BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION
|
|
ISO 8503-1:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
|
|
ISO 8502-9:1998
|
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 9: Field method for the conductometric determination of water-soluble salts
|
|
ASTM E 709 : 2015 : REDLINE
|
Standard Guide for Magnetic Particle Testing
|
|
AWS D1.1 : 2000
|
STRUCTURAL WELDING CODE - STEEL
|
|
ISO 8503-4:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure
|
|
ISO 14919:2015
|
Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions
|
|
API 64 : 2017-08
|
DIVERTER EQUIPMENT SYSTEMS
|
|
API STD 6ACRA:2015
|
AGE-HARDENED NICKEL-BASED ALLOYS FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT
|
|
ISO 8503-5:2017
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile
|
|
ASTM E 8/E8M : 2016-09
|
TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.