AS 1289.1-1991
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Methods of testing soils for engineering purposes Preparation of disturbed soil samples for testing
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
01-24-2024
English
07-12-1991
This Standard sets out a procedure for preparing samples, as received from the field, for testing in accordance with the various methods in the AS 1289 series.
Committee |
CE-009
|
DocumentType |
Standard
|
ISBN |
0 7262 6924 7
|
Pages |
5
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Under Revision see DR 98522 First published as part of AS A89-1966.Revised and redesignated in part as AS 1289.A2-1977.Revised and redesignated AS 1289.1-1991. First published as part of AS A89-1966. Revised and redesignated in part as AS 1289.A2-1977. Revised and redesignated AS 1289.1-1991.
AS 1289.B1.2-1977 | Methods of testing soil for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Sand bath method (subsidiary method) |
AS 1152-1993 | Specification for test sieves |
AS 1289.D2.1-1977 | Methods of testing soil for engineering purposes Soil chemical tests - Determination of the sulphate content of an natural soil and the sulphate content of the ground water (Standard method) |
AS 1289.E2.1-1977 | Methods of testing soil for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using modified compaction - Standard method |
AS 1289.C1.2-1977 | Methods of testing soil for engineering purposes Soil classification tests - Determination of the liquid limit of a soil - One point method (subsidiary method) |
AS 1289.C5.1-1977 | Methods of testing soil for engineering purposes Soil classification tests - Determination of the soil particle density of a soil |
AS 1289.E2.2-1977 | Methods of testing soil for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using modified compaction - Subsidiary method |
AS 1289.C1.1-1977 | Methods of testing soil for engineering purposes Soil classification tests - Determination of the liquid limit of a soil - Oven drying method (standard method) |
AS 1289.B1.1-1977 | Methods of testing soil for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Oven drying method (standard method) |
AS 1289.B1.3-1977 | Methods of testing soil for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Methylated spirit ignition method (subsidiary method) |
AS 1289.C2.1-1977 | Methods of testing soil for engineering purposes Soil classification tests - Determination of the plastic limit of a soil (Standard method) |
AS 1289.E1.2-1977 | Methods of testing soil for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compaction - Subsidiary method |
AS 1289.D3.1-1977 | Methods of testing soil for engineering purposes Soil chemical tests - Determination of the pH value of a soil - Standard method |
AS 1289.D3.2-1977 | Methods of testing soil for engineering purposes Soil chemical tests - Determination of the pH value of a soil - Colorimetric method (subsidiary method) |
AS 1289.B1.4-1986 | Methods of testing soil for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Microwave-oven drying method (subsidiary method) |
AS 1289.C4.1-1977 | Methods of testing soil for engineering purposes Soil classification tests - Determination of the linear shrinkage of a soil (Standard method) |
AS 1289.3.9-1991 | |
AS 1289.C6.3-1977 | Methods of testing soil for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of fine analysis using a hydrometer |
AS 1289.0-1991 | Methods of testing soils for engineering purposes General requirements and list of methods |
AS 1726-1993 | Geotechnical site investigations |
AS 1289.E1.1-1977 | Methods of testing soil for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compaction - Standard method |
AS 1289.B1.5-1988 | Methods of testing soil for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Infrared lights method (subsidiary method) |
AS 1289.F1.1-1977 | Methods of testing soil for engineering purposes Soil strength and consolidation tests - Determination of the California bearing ratio of a soil - Standard laboratory method for a remoulded specimen |
AS 1289.D1.1-1977 | Methods of testing soil for engineering purposes Soil chemical tests - Determination of the organic matter content of a soil (Standard method) |
AS 1289.C6.1-1977 | Methods of testing soil for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving |
AS 1289.5.2.1-1993 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using modified compactive effort |
AS 1289.3.5.2-1995 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the soil particle density of combined soil fractions - Vacuum pycnometer method |
AS 1289.5.5.1-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method (Reconfirmed 2016) |
AS 3582.3-1994 | Supplementary cementitious materials for use with portland cement - Silica fume |
AS 1289.3.6.3-1994 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of fine analysis using a hydrometer |
AS 1289.3.1.1-1995 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the liquid limit of a soil - Four point Casagrande method |
AS 3798-1996 | Guidelines on earthworks for commercial and residential developments |
AS 1289.2.1.6-1993 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Hotplate drying method (subsidiary method) |
AS 1289.5.7.1-1993 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Hilf density ratio and Hilf moisture variation (rapid method) |
AS 1289.6.8.1-1995 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the resilient modulus and permanent deformation of granular unbound pavement materials |
AS 1289.3.1.2-1995 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the liquid limit of a soil - One point Casagrande method (subsidiary method) |
AS 1289.3.6.1-1995 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving |
AS 1289.3.2.1-1995 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the plastic limit of a soil - Standard method |
AS 1289.3.6.2-1995 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Analysis by sieving in combination with hydrometer analysis (subsidiary method) |
AS 1289.6.7.1-2001 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of permeability of a soil - Constant head method for a remoulded specimen (Reconfirmed 2013) |
AS 1289.6.7.1-2001 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of permeability of a soil - Constant head method for a remoulded specimen (Reconfirmed 2013) |
AS 1289.3.4.1-1995 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the linear shrinkage of a soil - Standard method |
AS 1289.4.2.1-1997 | Methods of testing soils for engineering purposes Soil chemical tests - Determination of the sulfate content of a natural soil and the sulfate content of the groundwater - Normal method |
AS 1289.6.7.3-1999 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of permeability of a soil - Constant head method using a flexible wall permeameter |
AS 1289.6.7.1-1999 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of permeability of a soil - Constant head method for a remoulded specimen |
AS 1289.2.1.4-1992 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Microwave-oven drying method (subsidiary method) |
AS 1289.2.1.2-1992 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Sand bath method (subsidiary method) |
AS 1289.2.1.1-1992 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Oven drying method (standard method) |
AS 1289.1.3.1-1999 | |
AS 1289.6.1.1-1998 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for a remoulded specimen |
AS 1289.6.7.2-1999 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of permeability of a soil - Falling head method for a remoulded specimen |
AS 1289.2.1.5-1992 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Infrared lights method (subsidiary method) |
AS 1289.3.5.1-1995 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the soil particle density of a soil - Standard method |
AS 1289.5.1.1-1993 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort |
AS 1289.4.1.1-1997 | Methods of testing soils for engineering purposes Soil chemical tests - Determination of the organic matter content of a soil - Normal method |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.