• There are no items in your cart

AS 1418.14-1996

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

05-11-2022

Language(s)

English

Published date

07-05-1996

Preview

1 - AS 1418.14-1996 CRANES (INCLUDING HOISTS AND WINCHES) - REQUIREMENTS FOR CRANES SUBJECT TO ARDUOUS WORKING CONDITIONS
4 - PREFACE
5 - CONTENTS
7 - SECTION 1 SCOPE AND GENERAL
7 - 1.1 SCOPE
7 - 1.2 APPLICATION
7 - 1.3 REFERENCED DOCUMENTS
9 - 1.4 DEFINITIONS
9 - 1.4.1 Arduous working conditions
9 - 1.4.2 Positive bridge camber
10 - SECTION 2 PERFORMANCE REQUIREMENTS FOR BOTH d.c. AND a.c. CRANES
10 - 2.1 GENERAL
11 - 2.2 MEETING PERFORMANCE CRITERIA
12 - SECTION 3 STRUCTURE
12 - 3.1 GENERAL
12 - 3.2 GIRDERS
12 - 3.2.1 General
12 - 3.2.2 Girders design
12 - 3.2.3 Camber of bridge
12 - 3.2.4 Attachment of girders to end carriages
12 - 3.3 END CARRIAGES
12 - 3.3.1 Construction
13 - 3.3.2 Removal of wheels
13 - 3.4 CRAB
13 - 3.5 RAILS
14 - SECTION 4 MECHANISMS
14 - 4.1 GENERAL
14 - 4.2 BUFFERS
14 - 4.3 TRACK WHEELS
14 - 4.4 BOLTING
14 - 4.4.1 General
14 - 4.4.2 Locking
14 - 4.5 DRIVES
17 - 4.6 GEARS
17 - 4.6.1 Spur and helical gears
17 - 4.6.2 Worm gears
17 - 4.6.3 Service factors
17 - 4.6.4 Inspection and certification
19 - 4.7 GEARBOXES
19 - 4.8 BEARINGS
19 - 4.8.1 General
19 - 4.8.2 Capacity and loading
19 - 4.8.3 Housings
19 - 4.8.4 Protection
19 - 4.9 LUBRICATION
19 - 4.10 SHAFTS AND KEYS
20 - 4.11 COUPLINGS
20 - 4.12 SHEAVES
20 - 4.12.1 Sheaves
21 - 4.12.2 Equalizer
21 - 4.12.3 Fleet angle
21 - 4.12.4 Material
21 - 4.13 ROPE DRUMS
21 - 4.14 WIRE ROPES
21 - 4.15 HOOKS
22 - 4.16 GUARDING
22 - 4.16.1 General
22 - 4.16.2 Drives
22 - 4.16.3 Shafts and coupling
22 - 4.16.4 Long travel cross-shaft
22 - 4.16.5 Sheave
22 - 4.17 WEATHER PROTECTION
22 - 4.18 BRAKING
23 - SECTION 5 ELECTRICAL EQUIPMENT AND CONTROLS
23 - 5.1 ELECTRIC MOTORS
23 - 5.2 CONTROL ASSEMBLY
23 - 5.2.1 Control assembly
23 - 5.2.2 Control voltage
23 - 5.2.3 Control wires
23 - 5.2.4 Component mounting
23 - 5.2.5 Enclosures
24 - 5.2.6 Switchgear and motor control panels
24 - 5.3 POWER SUPPLY
24 - 5.4 CRANE CONTROL
24 - 5.5 MAIN ISOLATING SWITCHES
24 - 5.6 AUXILIARY ISOLATING SWITCHES AND DISTRIBUTION BOARDS
24 - 5.6.1 Auxiliary isolating switches
24 - 5.6.2 Switchboards
24 - 5.7 ELECTRICAL SWITCHGEAR AND CONTROL EQUIPMENT HOUSING
24 - 5.7.1 Electrical equipment other than resistor assemblies
24 - 5.7.2 Resistor assemblies
24 - 5.8 CONDUCTOR AND COLLECTOR SYSTEMS
25 - 5.9 CABLES AND WIRING
25 - 5.9.1 Specifications
25 - 5.9.2 Minimum size
25 - 5.9.3 Installation
25 - 5.9.4 Termination
25 - 5.9.5 Identification
25 - 5.10 POWER OUTLETS
25 - 5.11 LIGHTING
25 - 5.12 FUSES
26 - SECTION 6 CRANE CABS
26 - 6.1 STRUCTURE
26 - 6.2 CAB ACCESS
26 - 6.2.1 General
26 - 6.2.2 Emergency access to cab
26 - 6.3 SIZE
26 - 6.4 VISIBILITY AND FIELD OF VISION
27 - 6.5 LIGHTING, HEATING, VENTILATION AND AIRCONDITIONING
27 - 6.6 NOISE LEVEL
27 - 6.7 SEATING
27 - 6.7.1 General
27 - 6.7.2 Operator's seat
27 - 6.7.3 Additional seat
27 - 6.8 CONTROLS
28 - 6.9 INDICATOR
28 - 6.10 MEANS OF ACCESS
28 - 6.11 HOT METAL HANDLING CRANES
28 - 6.11.1 General
28 - 6.11.2 Cabin location
28 - 6.11.3 Cabin construction
28 - 6.11.4 Windows and doors
29 - 6.11.5 Access
30 - SECTION 7 INSPECTION, TESTING AND COMMISSIONING
30 - 7.1 INSPECTION
30 - 7.2 COMMISSIONING TESTS
30 - 7.2.1 General
30 - 7.2.2 Report
31 - APPENDIX A - TYPICAL ARDUOUS WORKING CONDITIONS
33 - APPENDIX B - INFORMATION TO BE SUPPLIED WITH ENQUIRY OR ORDER
39 - APPENDIX C - INFORMATION TO BE SUPPLIED BY MANUFACTURER
41 - APPENDIX D - MANUFACTURING TOLERANCES FOR BRIDGE CRANES
41 - D1 CRANE SPAN
41 - D2 WHEEL INCLINATION TO HORIZONTAL
42 - D3 HORIZONTAL, ADJACENT RAILS
42 - D4 VERTICAL, ADJACENT RAILS
43 - D5 VERTICAL, ALONG RAIL
43 - D6 VERTICAL AXES OF RAIL AND RAIL GIRDER
44 - D7 HORIZONTAL, ALONG RAILS
44 - D8 WHEEL ANGLE
45 - D9 ADJACENT BOGIE WHEELS
45 - D10 IN-LINE WHEELS
46 - D11 GUIDE ROLLERS TO RAIL HEAD
47 - D12 WHEEL FLOAT
48 - D13 CRANE SQUARENESS
49 - APPENDIX E - FASTENING OF END CARRIAGE USING SHEAR RINGS
50 - APPENDIX F - GEAR INSPECTION CERTIFICATE

This Standard specifies the requirements for cranes subject to arduous working conditions. It includes sections on performance, structure, mechanisms, electrical equipment, controls, conductors, collector systems, cabs, inspection and commissioning tests. The appendices cover arduous working criteria, and carriage fastening, enquiry and order information to be supplied by manufacturer and manufacturing tolerances. The Standard may be designated in part or parts for cranes with only a limited range of components subjected to arduous duty.

This Standard specifies the additional requirements to AS 1418.1 for cranes subject to arduous working conditions.

Committee
ME/5
DocumentType
Standard
ISBN
0 7337 0398 4
Pages
44
PublisherName
Standards Australia
Status
Withdrawn
Supersedes

First published as AS 1418.14-1996.

AS 1403-2004 Design of rotating steel shafts (Reconfirmed 2016)
AS 2549-1996 Cranes (including hoists and winches) - Glossary of terms
AS 1657-1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 3008.1-1989 Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV
AS/NZS 1891.1:1995 Industrial fall-arrest systems and devices Safety belts and harnesses
AS 1418.3-1997 Cranes, hoists and winches Bridge, gantry, portal (including container cranes) and jib cranes (Reconfirmed 2016)
AS 1418.1-2002 Cranes, hoists and winches General requirements
AS/NZS 3947.3:2001 Low-voltage switchgear and controlgear Switches, disconnectors, switch-disconnectors and fuse-combination units
AS 1418.12-1991 Cranes (including hoists and winches) Crane collector systems (Reconfirmed 2016)
AS 3947.5.1-1995 Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electromechanical control circuit devices
AS 3947.3-1994 Low-voltage switchgear and controlgear - Switches, disconnectors, switch-disconnectors and fuse-combination units
AS 3777-1990 Shank hooks and large-eye hooks - Maximum 25 t
AS/NZS 3439.1:2002 Low-voltage switchgear and controlgear assemblies Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD)
AS 4024.1(INT)-1992 Safeguarding of machinery General principles
AS/NZS 3947.5.1:2000 Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electromechanical control circuit devices
AS 2074-1982 Steel castings
AS/NZS 3190:2002 Approval and test specification - Residual current devices (current-operated earth-leakage devices)
AS 1418.1-1994 Cranes (including hoists and winches) - General requirements
AS 3190-1994 Approval and test specification - Residual current devices (current-operated earth-leakage devices)
AS 3000-1986 Electrical installations - Buildings, structures and premises (known as the SAA Wiring Rules)
AS 1939-1990 Degrees of protection provided by enclosures for electrical equipment (IP Code)
AS/NZS 1891.1:2007 Industrial fall-arrest systems and devices Harnesses and ancillary equipment
AS 2005.10-1988 Low voltage fuses - Fuses with enclosed fuse-links - General requirements
AS 2074-2003 Cast steels
AS/NZS 3678:1996 Structural steel - Hot-rolled plates, floorplates and slabs
AS 1403-1985 Design of rotating steel shafts
AS 2005.1-1981 Fuses with enclosed fuse-links (up to and including 1000 V a.c. and 1500 V d.c.) - General requirements
AS 2938-1993 Gears - Spur and helical - Guide to specification and rating
AS B66-1969 Worm gearing (inch series)
AS 2184-1985 Low voltage switchgear and controlgear - Moulded-case circuit-breakers for rated voltages up to and including 600 V a.c. and 250 V d.c.
JIS B 1723:1977 Dimensions of cylindrical worm gears

AS 1418.3-1997 Cranes, hoists and winches Bridge, gantry, portal (including container cranes) and jib cranes (Reconfirmed 2016)
AS 2550.1-2011 Cranes, hoists and winches - Safe use General requirements
AS/NZS 1170.1:2002 Structural design actions Permanent, imposed and other actions
AS 1418.1-2002 Cranes, hoists and winches General requirements
AS/NZS 1891.4:2009 Industrial fall-arrest systems and devices Selection, use and maintenance
AS 1418.8-2008 Cranes, hoists and winches Special purpose appliances (Reconfirmed 2018)
AS 5804.1-2010 High-voltage live working General
AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS 4991-2004 Lifting devices
AS 2089-2008 Sheave blocks for lifting purposes (Reconfirmed 2019)
AS 2550.3-2002 Cranes, hoists and winches - Safe use Bridge, gantry, portal (including container cranes) and jib cranes
AS/NZS 1170.0:2002 Structural design actions General principles
AS 2321:2014 Short-link chain for lifting purposes
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) Electrical installations (known as the Australian/New Zealand Wiring Rules)

View more information
US$66.05
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.