• There are no items in your cart

AS 1418.3-1997

Current
Current

The latest, up-to-date edition.

Cranes, hoists and winches Bridge, gantry, portal (including container cranes) and jib cranes (Reconfirmed 2016)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

12-05-1997

Preview

Specifies the requirements for bridge, gantry, semi-gantry and portal cranes as defined in AS2549, and for container and heavy duty cranes. Sections are included on classification and load rating, structure, stability, mechanisms, access from fixed platforms, access from mobile platforms, clearances, electrical access isolators, speed limitations for pendant - controlled cranes, marking and data, inspection and commissioning, and guarding. Appendices give further requirements for access and clearance, and the use of ladders, and give guidance on information to be supplied with enquiry, order or tender and typical hazards.

This Standard sets out requirements for bridge, gantry, semi-gantry, and portal cranes defined in AS 2549. It also covers container and heavy-duty cranes. It is complementary to AS 1418.1, but the requirements given herein take precedence over corresponding requirements in that Standard.NOTES:1 Guidance on information to be supplied with enquiry, order, or tender is given in Appendix A.2 Additional requirement for heavy duty cranes are given in AS 1418.14.

Committee
ME-005
DocumentType
Standard
ISBN
0 7337 1527 3
Pages
40
ProductNote
Reconfirmed 18/11/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 18/11/2016
PublisherName
Standards Australia
Status
Current
Supersedes

Amendment 2 see DR 00322 CP First published as part of AS CB2-1938.Second edition 1960.AS CB2-1960 revised and redesignated in part as AS 1418.3-1977.Second edition 1981.Third edition 1986.Fourth edition 1990.Fifth edition 1997.Reconfirmed 2016. Originated as part of AS CB2-1938. Previous edition AS 1418.3-1990. Fifth edition 1997. Reissued incorporating Amendment No. 1 (September 1998). Reissued incorporating Amendment No. 2 (June 2002).

AS 1576-1974 Code of practice for metal scaffolding (known as the SAA Metal Scaffolding Code)
AS 2321-2006 Short-link chain for lifting purposes
AS 1418.10-1996 Cranes (including hoists and winches) - Elevating work platforms
AS 1892.2-1992 Portable ladders Timber (Reconfirmed 2022)
AS 1418.14-1996 Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions
AS/NZS 1891.1:1995 Industrial fall-arrest systems and devices Safety belts and harnesses
AS 2550.1-2002 Cranes, hoists and winches - Safe use - General requirements
AS 2670-1983 Vibration and shock - Guide to the evaluation of human exposure to whole body vibration
AS 1418.1-2002 Cranes, hoists and winches General requirements
AS 1657-1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 1000-1979 The International System of Units (SI) and its application
AS 4024.1-1996 Safeguarding of machinery General principles
AS 1318-1985 Use of colour for the marking of physical hazards and the identification of certain equipment in industry (known as the SAA Industrial Safety Colour Code)
AS/NZS 1891.1:2007 Industrial fall-arrest systems and devices Harnesses and ancillary equipment
AS 2550.1-1993 Cranes - Safe use - General requirements
AS 2549-1996 Cranes (including hoists and winches) - Glossary of terms
AS 3990-1993 Mechanical equipment - Steelwork (Reconfirmed 2016)
AS 1418.1-1994 Cranes (including hoists and winches) - General requirements
AS/NZS 3711.3:1993 Freight containers Corner fittings
AS 2321-1979 Short-link chain for lifting purposes (non-calibrated)

AS 2550.1-2011 Cranes, hoists and winches - Safe use General requirements
AS 1418.18-2001 Cranes, hoists and winches Crane runways and monorails
AS/NZS 1170.1:2002 Structural design actions Permanent, imposed and other actions
AS 1418.14-1996 Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions
AS 1418.1-2002 Cranes, hoists and winches General requirements
AS/NZS 1891.4:2009 Industrial fall-arrest systems and devices Selection, use and maintenance
SA RUL CR.1-2013 Rulings to cranes, hoists and winches Standards, Ruling 1: Load testing (commissioning tests) of bridge, gantry, portal (including container cranes) and jib cranes (Ruling to AS 1418.3-1997) (Reconfirmed 2016)
AS 1418.8-2008 Cranes, hoists and winches Special purpose appliances (Reconfirmed 2018)
AS 4100-1998 Steel structures (Reconfirmed 2016)
AS 5804.1-2010 High-voltage live working General
AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS 4991-2004 Lifting devices
AS 2550.3-2002 Cranes, hoists and winches - Safe use Bridge, gantry, portal (including container cranes) and jib cranes
AS/NZS 1170.0:2002 Structural design actions General principles
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS 1418.6-2004 Cranes, hoists and winches Guided storing and retrieving appliances (Reconfirmed 2018)

View more information
US$82.57
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.