• There are no items in your cart

AS 1589-2001

Current
Current

The latest, up-to-date edition.

Copper and copper alloy waste fittings (Reconfirmed 2018)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

04-02-2001

Preview

1 - AS 1589-2001 COPPER AND COPPER ALLOY WASTE FITTINGS
4 - PREFACE
5 - CONTENTS
7 - SECTION 1 SCOPE AND GENERAL
7 - 1.1 SCOPE
7 - 1.2 APPLICATION
7 - 1.3 REFERENCED DOCUMENTS
7 - 1.4 DEFINITIONS
7 - 1.4.1 Combination trap
7 - 1.4.2 Component
7 - 1.4.3 Loose coupling nut
7 - 1.4.4 Type test
8 - 1.5 DESIGN
8 - 1.5.1 Fittings
8 - 1.5.2 Alternative designs
8 - 1.6 MATERIALS
8 - 1.6.1 Copper
8 - 1.6.2 Copper alloy
8 - 1.6.3 Stainless steel
8 - 1.6.4 Filler metals
8 - 1.6.5 Sealing gaskets and rings
9 - 1.6.6 Flexible diaphragms for pan connectors
9 - 1.6.7 Plastic components
9 - 1.7 CONNECTION ENDS
9 - 1.7.1 General
9 - 1.7.2 Plain spigots
9 - 1.7.3 Capillary socket ends
9 - 1.7.4 Threaded ends and thread stops
10 - 1.7.5 Loose nut union end
10 - 1.7.6 Compression union end assemblies
10 - 1.7.7 Rubber ring ends
11 - 1.8 INTERMEDIATE JOINTS
11 - 1.8.1 General
11 - 1.8.2 Adjustable intermediate joints
12 - 1.8.3 Fixed intermediate joints
13 - 1.8.4 Flexible/ expansion joints
14 - 1.9 THREAD FORMS
14 - 1.9.1 General
14 - 1.9.2 Connection ends
14 - 1.9.3 Other than connection ends
14 - 1.10 WALL THICKNESS
16 - 1.11 PLATING AND OTHER SURFACE FINISHES
16 - 1.12 FREEDOM FROM DEFECTS
16 - 1.13 TEST REQUIREMENTS
16 - 1.13.1 General
16 - 1.13.2 Strength test
16 - 1.13.3 Torque test
16 - 1.14 MARKING
16 - 1.14.1 Space for marking
16 - 1.14.2 Components
17 - 1.14.3 Marking requirements
18 - SECTION 2 COPPER AND COPPER ALLOY WASTE TRAPS AND GULLIES
18 - 2.1 GENERAL
18 - 2.2 DESIGNATION OF SIZE
18 - 2.3 TRAPS AND GULLIES
18 - 2.3.1 Waterway
18 - 2.3.2 Depth of seal
18 - 2.3.3 Angle of outlet axis
19 - 2.3.4 Access
19 - 2.4 CONNECTION ENDS
19 - 2.4.1 General
19 - 2.4.2 Waste traps
20 - 2.4.3 Gullies
20 - 2.5 INSPECTION OPENINGS
21 - 2.6 TEST REQUIREMENTS
21 - 2.6.1 Pressure test
21 - 2.6.2 Air/vacuum test
23 - SECTION 3 COPPER AND COPPER ALLOY WASTE OUTLETS AND GRATINGS
23 - 3.1 GENERAL
23 - 3.2 DESIGNATION OF SIZE
23 - 3.3 GRATINGS
23 - 3.3.1 Design
23 - 3.3.2 Fixing
23 - 3.3.3 Bath waste outlet gratings
23 - 3.3.4 Grating surround
23 - 3.3.5 Waterway
23 - 3.3.6 Plating and coating
24 - 3.4 WASTE OUTLET BODIES
24 - 3.4.1 Waterway
24 - 3.4.2 Fixture waste outlets
24 - 3.4.3 Integral captive plug compliance
27 - 3.5 CONNECTION ENDS
27 - 3.5.1 Outlets
27 - 3.6 TEST REQUIREMENTS
27 - 3.6.1 Load test
27 - 3.7 MARKING
28 - SECTION 4 COPPER AND COPPER ALLOY WASTE CONNECTORS
28 - 4.1 GENERAL
28 - 4.2 FOOD WASTE DISPOSAL CONNECTORS
29 - 4.3 PAN CONNECTORS
29 - 4.3.1 Waterways
29 - 4.3.2 Connection ends
29 - 4.3.3 Angle
29 - 4.4 DOUBLE BOWL CONNECTORS
29 - 4.4.1 Waterways
30 - 4.4.2 Connection ends
30 - 4.4.3 Angle
30 - 4.5 SUDS SAVER BYPASS
30 - 4.5.1 Waterway
30 - 4.5.2 Connection ends
31 - 4.5.3 Angle
31 - 4.6 CAPS AND LININGS
31 - 4.6.1 General
31 - 4.6.2 Waterways
31 - 4.6.3 Connection ends
31 - 4.7 SOIL WASTE DUMP POINT CONNECTORS
33 - 4.8 TUBE BUSHES
33 - 4.8.1 Waterway
33 - 4.8.2 Connection ends
33 - 4.9 TEST REQUIREMENTS
33 - 4.9.1 Leakage test
34 - 4.9.2 Pressure test
34 - 4.9.3 Air/vacuum tests
35 - APPENDIX A - REFERENCED DOCUMENTS
37 - APPENDIX B - ENDURANCE TEST-FLEXIBLE/EXPANSION JOINTS
37 - B1 SCOPE
37 - B2 PRINCIPLE
37 - B3 APPLICATION
37 - B4 APPARATUS
38 - B5 TEST CONDITIONS
38 - B6 PROCEDURE
38 - B6.1 Hydrostatic test
38 - B6.2 Pneumatic test
38 - B6.3 Cycle test
38 - B6.4 Leakage test
38 - B7 REPORT
39 - APPENDIX C - STRENGTH TEST
39 - C1 SCOPE
39 - C2 PRINCIPLE
39 - C3 APPARATUS
39 - C4 PROCEDURE
40 - C5 REPORT
41 - APPENDIX D - TORQUE TEST
41 - D1 SCOPE
41 - D2 PRINCIPLE
41 - D3 APPARATUS
41 - D4 CONDITIONING AND TESTING
41 - D5 PROCEDURE
42 - D6 REPORT
43 - APPENDIX E - PRESSURE TEST
43 - E1 SCOPE
43 - E2 PRINCIPLE
43 - E3 APPLICATION
43 - E4 APPARATUS
43 - E5 TEST CONDITIONS
43 - E6 PROCEDURE
43 - E6.1 Hydrostatic test
44 - E6.2 Pneumatic test
44 - E7 REPORT
45 - APPENDIX F - AIR/ VACUUM TEST
45 - F1 SCOPE
45 - F2 PRINCIPLE
45 - F3 APPARATUS
45 - F4 TEST SPECIMEN
45 - F5 PROCEDURE
46 - F6 REPORT
47 - APPENDIX G - LOAD TEST
47 - G1 SCOPE
47 - G2 PRINCIPLE
47 - G3 TEMPERATURE OF TEST ENVIRONMENT
47 - G4 APPARATUS
47 - G5 TEST SPECIMEN
47 - G6 PROCEDURE
48 - G7 REPORT
49 - APPENDIX H - PRESSURE TEST OF PAN CONNECTOR WASTE FITTINGS
49 - H1 SCOPE
49 - H2 PRINCIPLE
49 - H3 TEMPERATURE OF TEST ENVIRONMENT
49 - H4 APPARATUS
49 - H5 TEST SPECIMEN
50 - H6 PROCEDURE
50 - H7 REPORT

Specifies requirements for copper and copper alloy waste fittings for use in plumbing installations and includes traps, gullies, waste outlets, gratings and connectors.

This Standard specifies requirements for copper and copper alloy waste fittings (hereinafter referred to as fittings) for use in plumbing installations and includes traps, gullies, waste outlets, gratings, and connectors.NOTE: Illustrations used in this Standard are diagrammatic only and have been chosen without prejudice.

Committee
WS-002
DocumentType
Standard
ISBN
0 7337 3514 2
Pages
44
ProductNote
Reconfirmed 21/09/2018.
This standard has been reconfirmed in Australia in 2018 and remains current in New Zealand. Reconfirmation Notice 21/09/2018
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS B38-1934.
Revised and redesignated as AS A74-1952.
Second edition 1969.
Revised and redesignated AS 1589-1973.
Second edition 1979.
Third edition 1987.
Fourth edition 1994.
Fifth edition 2001.
Reconfirmed 2018. Originated as AS B38-1934. Previous edition AS 1589-1994. Fifth edition 2001.

AS 2136-1977 Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018)
AS/NZS 1567:1997 Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021)
AS 1432-1996 Copper tubes for plumbing, gasfitting and drainage applications
AS/NZS 3500.0:1995 National Plumbing and Drainage Code Glossary of terms
AS/NZS 1260:2002 PVC-U pipes and fittings for drain, waste and vent application
AS 1769-1975 Welded stainless steel tubes for plumbing applications (Reconfirmed 2018)
AS 2738.2-1984 Copper and copper alloys - Compositions and designations - Wrought products
AS 1646.2-2000 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation
AS 1172.1-2005 Water closets (WC) Pans
AS 1432-2004 Copper tubes for plumbing, gasfitting and drainage applications
AS/NZS 1477:2006 PVC pipes and fittings for pressure applications
AS/NZS 1568:1998 Copper and copper alloys - Forging stock and forgings
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS 3688-2005 Water supply - Metallic fittings and end connectors
AS 1722.1-1975 Pipe threads of Whitworth form Sealing pipe threads (metric units)
AS 2345-1992 Dezincification resistance of copper alloys
AS 2887-1993 Plastic waste fittings
AS 1172.1-1993 Water closets of 6/3 L capacity - Pans
AS/NZS 1167.1:2005 Welding and brazing - Filler metals Filler metal for brazing and braze welding
AS 2345-2006 Dezincification resistance of copper alloys
AS/NZS 1477:1999 PVC pipes and fittings for pressure applications
AS 1167.1-1993 Welding and brazing - Filler metals Filler metal for brazing and braze welding
AS 1074-1989 Steel tubes and tubulars for ordinary service (Reconfirmed 2018)
AS 1572-1998 Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018)
AS 1722.2-1992 Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017)
AS 3795-1996 Copper alloy tubes for plumbing and drainage applications
AS/NZS 1260:1999 PVC pipes and fittings for drain, waste and vent applications
AS 3688-1994 Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors

AS 3517-2007 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018)
AS 5200.000-2006 Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018)
AS/NZS 3500.2:2018 Plumbing and drainage Sanitary plumbing and drainage
ATS 5200.004-2005 Technical Specification for plumbing and drainage products Urinal flushing cisterns
AS 1172.5:2019 Sanitary plumbing products Baths for ablutionary purposes
AS 2945(INT)-2002 Batch-type washer/disinfectors for health care facilities
ATS 5200.040-2005 Waste pipe connection outlets and gratings, separate or integral
ATS 5200.050-2005 Technical Specification for plumbing and drainage products Prefabricated bathroom modules
ATS 5200.104-2005 Appliances (miscellaneous)
AS/NZS 1730:1996 Washbasins
AS/NZS 3500.2:2003 Plumbing and drainage Sanitary plumbing and drainage
ATS 5200.476-2006 Technical Specification for plumbing and drainage products Heated water systems - Leak protection device
MP 52-2005 Manual of authorization procedures for plumbing and drainage products
AS/NZS 2023:1995 Baths for ablutionary purposes
AS 4809-2003 Copper pipe and fittings - Installation and commissioning
ATS 5200.420-2005 Technical Specification for plumbing and drainage products Trap-priming valves
AS 2887-1993 Plastic waste fittings
AS 1756-1999 Household sinks
AS 3861-1991 Spa baths (Reconfirmed 2016)
AS/NZS 1229:2002 Laundry troughs and tubs
ATS 5200.101-2005 Appliances (low hazard rating)
AS 5200.000-2005 Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products
AS 1172.4:2019 Sanitary plumbing products Washbasins
AS 2437-1987 Flusher/sanitizers for bed pans and urine bottles
AS 4809:2017 Copper pipe and fittings - Installation and commissioning
DR 01195 CP Laundry troughs and tubs
AS/NZS 3982:1996 Urinals
ATS 5200.105-2005
ATS 5200.475-2006 Technical Specification for plumbing and drainage products Heated Water Systems - Cold water recovery device
AS 3588-1996 Shower bases and shower modules (Reconfirmed 2016)
AS 1172.3:2019 Sanitary plumbing products Personal hygiene fixtures and appliances - Bidets and bidettes
ATS 5200.485-2006 Pressure compensating tank

View more information
US$98.41
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.