• There are no items in your cart

AS 2050-2002

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Installation of roof tiles
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

06-23-2021

Published date

01-01-2002

Preview

Sets out requirements for the placement and installing of roof tiles of the types specified in AS 2049. The installing methods described in This Standard apply only to tiled roofs of buildings that are intended for domestic, commercial or light industrial purposes for wind classifications N1-N4 and C1-C3 inclusive. This Standard applies only to roofs with pitches of 15 degrees or greater.

This Standard sets out requirements for the placement and installing of roof tiles of the types specified in AS 2049. The installation methods described in this Standard apply only to tiled roofs of buildings that are intended for domestic, commercial or light industrial purposes for wind classifications N1-N4 and C1-C3 inclusive. This Standard applies only to roofs with a pitch of 15° or greater. NOTES: 1 This Standard does not restrict the use of other installing and fastening methods or materials where it can be shown that they are not inferior to the performance achieved by the materials and methods described herein. 2 Where it is intended to install tiles to roofs with a pitch of less than 15°, the tile manufacturer’s advice should be sought to determine weatherproofing requirements. 3 The type of roof construction described in this Standard may not be adequate to resist wind forces in cases where the height of the eaves is more than 15 m above the mean surrounding ground level. In such cases, or in areas where cyclones or high winds are known to occur, the installing and fastening methods and sarking recommendations given in Appendix A are recommended.4 Appendix B includes information on the data normally provided by the specifier and the tile manufacturer, and on the work normally carried out as part of the tiling operation.

Committee
BD-008
DocumentType
Standard
Pages
20
ProductNote
Content within this standard has been reproduced (with modification) from the NASH Standard – Residential and Low-rise Steel Framing Part 2: Design Solutions, 2014 (incorporating amendment A), with permission of NASH. The NASH content which is reproduced in AS 2050 as Table 2.2.2 (B), Figure 2.2.2 and Table 3.2.6 may not be copied, reprinted or sub-licenced to end users.
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

First published in part as AS CA5-1933.AS CA6 first published 1933.Second edition 1948.Reprinted and redated AS CA6-1949.Second edition AS CA5-1950.Int 311 first published 1951.Third edition AS CA5-1963.Int 311-1951 revised and redesignated AS CA46-1967.AS CA5-1963 revised and redesignated AS 2050-1977.AS CA6-1949 revised and redesignated AS 1760-1975.AS CA46-1967 revised and redesignated AS 1758-1975.AS 1758-1975, AS 1760-1975 and AS 2050-1977 revised, amalgamated and redesignated AS 2050-1989.Second edition 1995.Fourth edition 2002.

AS/NZS 3500.5:2000 National Plumbing and Drainage - Domestic installations
AS 4055-1992 Wind loads for housing
AS 2049-2002 Roof tiles (Reconfirmed 2015)
AS 4055-2006 Wind loads for housing
AS 4046.8-2006 Methods of testing roof tiles Adhesive mechanical fasteners - Flexible pointing
AS/NZS 4600:2005 Cold-formed steel structures
AS 4046.9-2002 Methods of testing roof tiles Determination of dynamic weather resistance (Reconfirmed 2015)
AS 1684.2-2006 Residential timber-framed construction Non-cyclonic areas (SEE IMPORTANT NOTE)
AS 1562.1-1992 Design and installation of sheet roof and wall cladding Metal (Reconfirmed 2016)
AS/NZS 3500.1:2003 Plumbing and drainage Water services
AS 1720.1-1997 Timber structures Design methods
AS 3566.2-2002 Self-drilling screws for the building and construction industries - Corrosion resistance requirements
AS 1538-1988 Cold-formed Steel Structures Code
AS 1684.3-2006 Residential timber-framed construction Cyclonic areas
AS 3623-1993 Domestic metal framing (Reconfirmed 2018)
AS 1397-2001 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated
AS 3566.1-2002 Self-drilling screws for the building and construction industries General requirements and mechanical properties
AS 2758.1-1998 Aggregates and rock for engineering purposes - Concrete aggregates
AS/NZS 3500.1.2:1998 National plumbing and drainage Water supply - Acceptable solutions
AS 1684.3-1999 Residential timber-framed construction Cyclonic areas
AS 4046.8-2002 Methods of testing roof tiles Adhesive mechanical fastener (flexible pointing)
AS 1684.2-1999 Residential timber-framed construction Non-cyclonic areas
AS 2701.4-1984 Methods of sampling and testing mortar for masonry construction Method for determination of compressive strength
AS 1170.3-1990 Minimum design loads on structures (known as the SAA Loading Code) - Snow loads
AS/NZS 1170.1:2002 Structural design actions Permanent, imposed and other actions
AS 2334-1980 Steel nails - Metric series (Reconfirmed 2015)
AS/NZS 3500.0:1995 National Plumbing and Drainage Code Glossary of terms
AS 1478.1-2000 Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018)
AS/NZS 3500.3.2:1998 National plumbing and drainage Stormwater drainage - Acceptable solutions
AS/NZS 4600:1996 Cold-formed steel structures
AS/NZS 4200.2:1994 Pliable building membranes and underlays Installation requirements
AS 3972-1997 Portland and blended cements
AS/NZS 3500.4.2:1997 National Plumbing and Drainage Hot water supply systems - Acceptable solutions
AS/NZS 4200.1:1994 Pliable building membranes and underlays Materials
AS/NZS 3500.2.2:1996 National plumbing and drainage Sanitary plumbing and drainage - Acceptable solutions
AS/NZS 1170.2:2002 Structural design actions Wind actions
AS 3700-2001 Masonry structures

AS 4046.8-2002 Methods of testing roof tiles Adhesive mechanical fastener (flexible pointing)
AS 4200.2:2017 Pliable building membranes and underlays Installation
AS/NZS 4994.2:2009 Temporary edge protection Roof edge protection - Installation and dismantling
AS/NZS 3500.3:2003 Plumbing and drainage Stormwater drainage
AS/NZS 3500.3:2018 Plumbing and drainage Stormwater drainage
AS 2049-2002 Roof tiles (Reconfirmed 2015)
AS/NZS 3500.3:2015 Plumbing and drainage Stormwater drainage
AS/NZS 4994.2(INT):2004 Temporary roof edge protection for housing and residential buildings Installation and dismantling

View more information
US$60.92
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.