• There are no items in your cart

AS 2193-2005

Current
Current

The latest, up-to-date edition.

Calibration and classification of force-measuring systems (Reconfirmed 2017)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

03-18-2005

Preview

Specifies requirements for the static calibration of force-measuring instruments and their classification as working force standards.

This Standard specifies requirements for the static calibration of force-measuring instruments and their classification as working force standards. It also specifies the requirements for the static calibration of force-measuring systems of uniaxial testing machines and other force-measuring systems used for measuring the strength and other properties of materials, components, products and assemblies.The Standard covers the following subjects:(a) Classification requirements for force-measuring systems of testing machines and other force-measuring systems.(b) Procedures for the calibration of force-measuring systems.(c) Requirements for the calibration and the classification of working force standards used for the verification of force-measuring systems.NOTES:1. Requirements for extensometers used in conjunction with tension and compression testing machines are given in AS 1545.2. Advice and recommendations on information necessary for the performance of calibration are contained in the purchasing guidelines set out in Appendix A.This Standard applies to testing machines and force-measuring systems which indicate in terms of the SI unit of force, the newton (N), or in arbitrary units.NOTE: Reference should be made to AS/NZS1376 for the relationship between the newton and technical units of force.

Committee
MT-006
DocumentType
Standard
ISBN
0 7337 6546 7
Pages
43
ProductNote
Reconfirmed 31/03/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 31/03/2017
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS B128-1963.Revised and redesignated as AS 2193-1978.Second edition 2002.Third edition 2005.Reconfirmed 2017. Originated as AS B128-1963. Previous edition AS 2193-2002. Third edition 2005. Reissued incorporating Amendment No. 1 (August 2006).

AS ISO/IEC 17025-2005 General requirements for the competence of testing and calibration laboratories (Reconfirmed 2016)
AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
AS/NZS 1376:1996 Conversion factors
AS 1545-1976 Methods for the calibration and grading of extensometers (Reconfirmed 2017)
AS ISO/IEC 17025-1999 General requirements for the competence of testing and calibration laboratories
AS 2103-1978 Dial gauges and dial test indicators (metric series)
AS 3807-1998 Vocabulary of basic and general terms in metrology

AS 4497:2018 Roundslings - Synthetic Fibre
AS 1141.52-1995 Methods for sampling and testing aggregates Unconfined cohesion of compacted pavement materials
AS/NZS 1462.23:2006 Methods of test for plastics pipes and fittings Method for determination of ring flexibility
AS/NZS 2908.1:2000 Cellulose-cement products Corrugated sheets (Reconfirmed 2020)
AS 3585-2008 End fittings for synthetic flat-webbing and round slings (Reconfirmed 2019)
AS 2076-1996 Wire-rope grips for non-lifting applications
AS 2498.4-1993 Methods of testing rigid cellular plastics Determination of cross-breaking strength (Reconfirmed 2020)
AS 3706.2-2012 Geotextiles - Methods of test Determination of tensile properties - Wide strip and grab method (Reconfirmed 2023)
AS 2740-2001 Wedge-type sockets
AS 3777-1990 Shank hooks and large-eye hooks - Maximum 25 t
AS 2313.2.1-2005 Methods of test for single sided and double sided pressure-sensitive adhesive tape Physical properties - Breaking strength (Reconfirmed 2016)
AS/NZS 4380:2001 Motor vehicles - Cargo restraint systems - Transport webbing and components
AS 4133.0:2019 Methods of testing rocks for engineering purposes General requirements and list of methods
AS/NZS 2891.13.1:2013 Methods of sampling and testing asphalt Determination of the resilient modulus of asphalt - Indirect tensile method
AS 2313.1.5-2005 Methods of test for single sided and double sided pressure-sensitive adhesive tape Adhesion - Adhesion strength to own backing
AS 1891.5:2020 Personal equipment for work at height Manufacturing requirements for lanyard assemblies and pole straps
AS/NZS 1891.3:1997 Industrial fall-arrest systems and devices - Fall-arrest devices
AS 3706.13-2000 Geotextiles - Methods of test Determination of durability - Resistance to certain microbiological agents
AS 4133.4.3.1-2009 Methods of testing rocks for engineering purposes Rock strength tests - Determination of deformability of rock materials in uniaxial compression - Strengths of 50 MPa and greater
AS 2319-2001 Rigging screws and turnbuckles
AS 1741-1991 Vitrified clay pipes and fittings with flexible joints - Sewer quality (Reconfirmed 2018)
AS 2313.3.1-2005 Methods of test for single sided and double sided pressure-sensitive adhesive tape Ageing properties - Accelerated ageing
AS 2321-2006 Short-link chain for lifting purposes
AS 3600-2001 Concrete structures
AS 3706.13-2012 Geotextiles - Methods of test Determination of durability - Resistance to certain microbiological agents (Reconfirmed 2023)
AS 1334.3-1982 Methods of testing conveyor and elevator belting Determination of full thickness tensile strength and elongation of conveyor belting (Reconfirmed 2016)
AS 4797-2009 Stainless steel chain for lifting purposes (Reconfirmed 2019)
AS 4139-2003 Fibre-reinforced concrete pipes and fittings (Reconfirmed 2018)
AS 3706.4-2012 Geotextiles - Methods of test Determination of burst strength - California bearing ratio (CBR) - Plunger method (Reconfirmed 2023)
AS 1353.1-1997 Flat synthetic-webbing slings Product specification (Reconfirmed 2014)
AS 1138-1992 Thimbles for wire rope
AS 2313.2.2-2005 Methods of test for single sided and double sided pressure-sensitive adhesion tape Physical properties - Elongation (Reconfirmed 2016)
AS 2089-1993 Sheave blocks for lifting purposes
AS EN 12079.1-2010 Offshore containers and associated lifting sets Offshore containers - Design, manufacture and marking (EN 12079-1:2006, MOD)
AS/NZS 4275.2:1995 Methods of testing underground marking tape Tear resistance
AS 3680-1989 Polyethylene sleeving for ductile iron pipelines
AS 4046.3-2002 Methods of testing roof tiles Determination of transverse strength
AS 1085.20-2006 Railway track material - Part 20: Welding of steel rail
AS 3706.3-2000 Geotextiles - Methods of test Determination of tearing strength - Trapezoidal method
AS/NZS 2869:1998 Tampons - Menstrual
AS 2891.2.2-1995 Methods of sampling and testing asphalt Sample preparation - Compaction of asphalt test specimens using a gyratory compactor
AS/NZS 4287:1995 Child carrier seats for pedal bicycles - Safety requirements
AS 1012.10-2000 Methods of testing concrete Determination of indirect tensile strength of concrete cylinders ('Brazil' or splitting test) (Reconfirmed 2014)
AS 2001.2.20-2004 Methods of test for textiles Physical tests - Determination of seam breaking force
AS 4133.4.2-1993 Methods of testing rocks for engineering purposes Rock strength tests - Determination of uniaxial compressive strength
AS 4672.1:2007 Steel prestressing materials General requirements
AS 5101.4-2008 Methods for preparation and testing of stabilized materials Unconfined compressive strength of compacted materials
AS 1077-1992 Single-use syringes (sterile) for the injection of 100 units per millilitre insulin (U-100)
AS 1141.22:2019 Methods for sampling and testing aggregates Wet/dry strength variation
AS 3776-2006 Lifting components for Grade T chain slings
AS 2001.2.7-1987 Methods of test for textiles Physical tests - Determination of breaking force and extension of yarns (Reconfirmed 2016)
AS 1141.22-2008 Methods for sampling and testing aggregates Wet/dry strength variation
AS/NZS 2111.16:1996 Textile floor covering - Tests and measurements Determination of bond strength between backing components
AS 4133.4.3.2:2013 Methods of testing rocks for engineering purposes Rock strength tests - Determination of the deformability of rock materials in uniaxial compression - Rock strength less than 50 MPa
AS 1311-1987 Steel tendons for prestressed concrete-7-wire stress-relieved steel strand for tendons in prestressed concrete
AS 2062-1997 Non-destructive testing - Penetrant testing of products and components
AS/NZS 2350.11:2006 Methods of testing portland, blended and masonry cements Compressive strength
AS 4133.0-2005 Methods of testing rocks for engineering purposes General requirements and list of methods
AS 2329-1999 Mastic adhesives for fixing wallboards
AS 1085.20-2012 Railway track material Welding of steel rail
AS 4143.2-1993 Methods of test for fibre ropes Knotability and knot breaking force
AS 1141.51-1996 Methods for sampling and testing aggregates Unconfined compressive strength of compacted materials
AS 2313.1.2-2005 Methods of test for single sided and double sided pressure-sensitive adhesive tape Adhesion - Quickstick
AS 2688-1984 Timber doors
AS 2358-1990 Adhesives - For fixing ceramic tiles
AS 3700:2018 Masonry Structures
AS/NZS 4345:2001 Motor vehicles - Cargo restraint systems - Transport fibre rope
AS 2313.1.12-2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape Adhesion - Resistance to shear peel at ambient temperature
AS 2313.1.6-2005 Methods of test for single sided and double sided pressure-sensitive adhesive tape Adhesion - Unwind force
AS 2498.3-1993 Methods of testing rigid cellular plastics Determination of compressive stress (Reconfirmed 2020)
AS 3706.4-2001 Geotextiles - Methods of test Determination of burst strength - California bearing ratio (CBR) - Plunger method
AS/NZS 1891.1:2007 Industrial fall-arrest systems and devices Harnesses and ancillary equipment
AS 2776-1998 Pressure-sensitive adhesive label stock - Plastic
AS/NZS 1891.1:2020 Personal equipment for work at height Manufacturing requirements for full body combination and lower body harnesses
AS 2313.1.4-2005 Methods of test for single sided and double sided pressure-sensitive adhesive tape Adhesion - Adhesion strength after immersion
AS 3706.11-2004 Geotextiles - Methods of test Determination of durability - Resistance to degradation by light, heat and moisture
AS 3706.12-2001 Geotextiles - Methods of test Determination of durability - Resistance to degradation by hydrocarbons or chemical reagents (Reconfirmed 2018) (Reconfirmed 2023)
AS 4133.4.2.1-2007 Methods of testing rocks for engineering purposes Rock strength tests - Determination of uniaxial compressive strength of 50 MPa and greater
AS 2435-1992 Elastomeric hose for railway air brakes
AS 1816.2-2007 Metallic materials - Brinell hardness test Verification and calibration of testing machines
AS 2291-2007 Metallic materials - Tensile testing at elevated temperatures
AS 1900-2002 Flotation aids for water familiarization and swimming tuition
AS 3700-2001 Masonry structures
AS 1815.3-2007 Metallic materials - Rockwell hardness test Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-3:2005, MOD)
AS 2891.12.1-1995 Methods of sampling and testing asphalt Determination of the permanent compressive strain characteristics of asphalt - Dynamic creep test
AS 3569-1989 Steel wire ropes
AS 2055.1-1985 PVC sheet floor-covering - Unbacked, flexible
AS 2753-1985 Adhesives - Mastic - For bonding gypsum plaster linings to wood and metal framing members
AS 3554-1988 Adhesives - Epoxy - For raised pavement marker installation
AS/NZS 2588:1998 Gypsum plasterboard (Reconfirmed 2016)
AS 1774.28-2007 Refractories and refractory materials - Physical test methods Ceramic fibre products - Test methods
AS 1012.9-1999 Methods of testing concrete Determination of the compressive strength of concrete specimens
AS 1085.15-1995 Railway permanent way material - Part 15: Aluminothermic rail welding
AS 3700-2011 Masonry structures
AS 2089-2008 Sheave blocks for lifting purposes (Reconfirmed 2019)
AS 3706.3-2012 Geotextiles - Methods of test Determination of tearing strength - Trapezoidal method (Reconfirmed 2023)
AS 2001.2.19-1988 Methods of test for textiles Physical tests - Determination of bursting force of textile fabrics - Ball burst method (Reconfirmed 2016)
AS 3553-1988 Adhesives for floor and wall applications - Resilient vinyl, linoleum and rubber sheet and tiles - Interior and exterior use
AS 1649-2001 Timber - Methods of test for mechanical fasteners and connectors - Basic working loads and characteristic strengths
AS/NZS 2891.5:2015 Methods of sampling and testing asphalt Compaction of asphalt by Marshall method and determination of stability and flow - Marshall procedure
AS 2385-1990 Single-use (sterile) infusion sets for general medical use
AS 1141.52:2019 Methods for sampling and testing aggregates Unconfined cohesion of compacted pavement materials
AS 2699.1:2020 Built-in components for masonry construction Wall ties
AS 1141.22-1996 Methods for sampling and testing aggregates Wet/dry strength variation
AS 2282.7-1999 Methods for testing flexible cellular polyurethane Determination of tear resistance
AS 1815.2-2007 Metallic materials - Rockwell hardness test Verification and calibration of testing machine (scales A, B, C, D, E, F, G, H, K, N, T)
AS 2001.2.10-1986 Methods of test for textiles Physical tests - Determination of the tear resistance of woven textile fabrics by the wing-rip method (Reconfirmed 2016)
AS 2891.13.1-1995 Methods of sampling and testing asphalt Determination of the resilient modulus of asphalt - Indirect tensile method
AS 3637.3-1997 Underground mining - Winding suspension equipment Rope cappings
AS 1313-1989 Steel tendons for prestressed concrete - Cold-worked high-tensile alloy steel bars for prestressed concrete
AS 2317-1998 Collared eyebolts
AS/NZS 4344:2001 Motor vehicles - Cargo restraint systems - Transport chain and components
AS 2001.2.21-1989 Methods of test for textiles Physical tests - Determination of seam opening due to the application of force in the transverse direction
AS 1666.1-1995 Wire-rope slings - Product specification
AS 2313.1.9-2005 Methods of test for single sided and double sided pressure-sensitive adhesive tape Adhesion - Resistance to shear peel at elevated temperature
AS 3777-2008 Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019)
AS 2313.1.11-2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape Adhesion - Resistance to dynamic shear load at ambient temperature
AS/NZS 2269:2004 Plywood - Structural
AS 2001.2.15-1989 Methods of test for textiles Physical tests - Determination of thickness of textile fabrics
AS 2332-2003 Slide fasteners
AS 2891.5-2004 Methods of sampling and testing asphalt - Determination of stability and flow Marshall procedure
AS/NZS 4131:2010 Polyethylene (PE) compounds for pressure pipes and fittings (Reconfirmed 2022)
AS 1049-2003 Telecommunication cables - Insulation, sheath and jacket
AS 2841-2005 Galvanized steel wire strand (Reconfirmed 2016)
AS 1391-2007 Metallic materials - Tensile testing at ambient temperature
AS/NZS 2111.15:1996 Textile floor coverings - Tests and measurements Determination of tuft withdrawal force
AS 2318-2006 Swivels for lifting applications (Reconfirmed 2022)
AS 4133.4.2.2-2013 Methods of testing rocks for engineering purposes Rock strength tests - Determination of uniaxial compressive strength - Rock strength less than 50 MPa
AS 2869-2008 Tampons - Menstrual
AS 4143.1-1993 Methods of test for fibre ropes Dimensions, linear density, breaking force and elongation
AS 1138-2008 Thimbles for wire rope (Reconfirmed 2019)
AS/NZS 4327:1995 Metal-banded flexible couplings for low-pressure applications (Reconfirmed 2020)
AS 1889.2-1985 PVC floor tiles - Flexible
AS 1753-1990 Webbing for restraining devices for occupants of motor vehicles
AS 3585-1990 End fittings for flat-webbing slings
AS/NZS 4266.32:2004 Reconstituted wood-based panels - Methods of test Veneer bond strength
AS 2666-1996 Pressure-sensitive adhesive label stock - Paper
AS 1774.1-2000 Refractories and refractory materials - Physical test methods Determination of cold compressive strength (Reconfirmed 2013)
AS 1310-1987 Steel wire for tendons in prestressed concrete
AS 2321:2014 Short-link chain for lifting purposes
AS 2001.2.22-2006 Methods of test for textiles Physical tests - Determination of yarn slippage in woven fabric at a standard stitched seam
AS 3706.2-2000 Geotextiles - Methods of test Determination of tensile properties - Wide-strip method
AS 1334.8-1982 Methods of testing conveyor and elevator belting Determination of resistance to tear propagation and resistance of carcass to tearing* (Reconfirmed 2016)
AS 1012.11-2000 Methods of testing concrete Determination of the modulus of rupture (Reconfirmed 2014)
AS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applications
AS 1855-2008 Methods for the determination of transverse tensile properties of round steel pipe
AS 3706.11-2012 Geotextiles - Methods of test Determination of durability - Resistance to degradation by light, heat and moisture (Reconfirmed 2023)
AS 4133.4.3-1993 Methods of testing rocks for engineering purposes Rock strength tests - Determination of deformability of rock materials in uniaxial compression
AS/NZS 2208:1996 Safety glazing materials in buildings
AS 2313.1.8-2005 Methods of test for single sided and double sided pressure-sensitive tape Adhesion - Resistance to dynamic shear load at elevated temperature (Reconfirmed 2016)
AS 1666.1-2009 Wire-rope slings Product specification (Reconfirmed 2019)
AS 1774.3-2000 Refractories and refractory materials - Physical test methods Determination of cold modulus of rupture (Reconfirmed 2013)
AS 2983.8-1987 Methods of test for synthetic sporting surfaces - Determination of tear resistance
AS 4177.4-2004 Caravan and light trailer towing components Safety chains up to 3500 kg capacity
AS/NZS 4257.9:1995 Plastic roof and wall cladding materials - Methods of test Determination of transverse bending stiffness
AS 2741-2002 Shackles
AS 2284-1979 Safe working with elastomeric hose and hose assemblies for steam-cleaning machines

View more information
US$98.41
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.