• There are no items in your cart

AS 2887-1993

Current
Current

The latest, up-to-date edition.

Plastic waste fittings
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

11-15-1993

Preview

Specifies requirements for moulded or fabricated plastic waste fittings for use in plumbing installations. Such fittings are suitable for receiving short-duration, intermittent liquid discharges at temperatures not exceeding 95 degrees Celsius. UPVC fittings for soil, waste and vent applications are not covered by this Standard.

This Standard specifies requirements for moulded or fabricated plastic waste fittings for use in plumbing installations. Such fittings are suitable for receiving short-duration, intermittent liquid discharges at temperatures not exceeding 95¦C.NOTE: Where it is envisaged that a plastic waste fitting will be used in an environment where temperatures in excess of 95¦C are common, advice should be sought from the manufacturer. UPVC fittings for soil, waste and vent applications are not covered by this Standard (see AS 1415).

Committee
PL-006
DocumentType
Standard
ISBN
0 7262 8484 X
Pages
23
ProductNote
Reconfirmed 27/01/2016.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 27/01/2017
PublisherName
Standards Australia
Status
Current
Supersedes

First published as part of AS A162-1969.Revised and redesignated in part as AS 2887-1986.Second edition 1993.Reconfirmed 2017. First published as part of AS A162-1969. Revised and redesignated in part as AS 2887-1986. Second edition 1993.

AS 1432-1996 Copper tubes for plumbing, gasfitting and drainage applications
AS 2888.2-2002 Methods of testing plastics waste fittings Method for determining dimensions
AS 2888.5-1986 Methods of testing plastics waste fittings Trap seal test
AS 1415.4-1984 Unplasticized PVC (UPVC) pipes and fittings for soil, waste and vent (SWV) applications - Rubber ring expansion joints
AS 2888.10-1986 Methods of testing plastics waste fittings Method for leak testing plastics pan connectors
AS 1444-2007 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017)
AS 1769-1975 Welded stainless steel tubes for plumbing applications (Reconfirmed 2018)
AS 2888.9-1986 Methods of testing plastics waste fittings Method for determining residual stress in plastics waste fittings
AS 2033-1980 Installation of polyethylene pipe systems
AS 2888.1-2002 Methods of testing plastics waste fittings Method of determining the suitability of connection threads of BSP form
AS 2888.10-2002 Methods of testing plastics waste fittings Method for leak testing plastics pan connectors
AS 3500.0-1990 National Plumbing and Drainage Code Glossary of terms
AS 2888.4-1986 Methods of testing plastics waste fittings Method for air pressure/vacuum testing of plastics waste fittings
AS 2888.2-1993 Methods of testing plastics waste fittings Method for determining dimensions
AS 1589-2001 Copper and copper alloy waste fittings (Reconfirmed 2018)
AS 2888.3-2002 Methods of testing plastics waste fittings Methods for pressure testing of plastics waste fittings
AS 1646-2007 Elastomeric seals for waterworks purposes (Reconfirmed 2018)
AS 2888.9-2002 Methods of testing plastics waste fittings Method for determining residual stress in plastics waste fittings
AS 2888.4-2002 Method of testing plastics waste fittings Method for air pressure/vacuum testing of plastics waste fittings
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS 2888.5-2002 Methods of testing plastics waste fittings Trap seal test
AS 2888.7-2002 Methods of testing plastics waste fittings Method for testing the seal of plastics waste outlets
AS 2888.3-1986 Methods of testing plastics waste fittings Method for pressure testing of plastics waste fittings
AS 1074-1989 Steel tubes and tubulars for ordinary service (Reconfirmed 2018)
AS 1172-1989 Water closet pans
AS 2888.8-1993 Methods of testing plastics waste fittings - Thermal cycling test
AS 2888.11-1993 Methods of testing plastics waste fittings Method for cyclic testing of plastics telescopic waste connectors (rubber-ring joint type)
AS 1415.1-1984 Unplasticized PVC (UPVC) pipes and fittings for soil, waste and vent (SWV) applications - Pipes
AS 1432-2004 Copper tubes for plumbing, gasfitting and drainage applications
AS 2888.7-1986 Methods of testing plastics waste outlets Method for testing the seal of plastics waste outlets
AS 1589-1994 Copper and copper alloy waste fittings
AS 2888.1-1993 Methods of testing plastics waste fittings Method of determining the suitability of connection threads of BSP form
AS 2888.6-1986 Methods of testing plastics waste outlets Method for load testing of plastics waste outlets
AS 1415.2-1984 Unplasticized PVC (UPVC) pipes and fittings for soil, waste and vent (SWV) applications - Moulded fittings
AS 1444-1996 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties
AS 2888.6-2002 Methods of testing plastics waste fittings Method for load testing of plastics waste outlets
AS 2888.8-2002 Methods of testing plastics waste fittings Thermal cycling test
AS 1722.2-1992 Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017)
AS 3518.2-1988 Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Solvent cement fittings
AS 2888.11-2002 Methods of testing plastics waste fittings Method for cyclic testing of plastics telescopic waste connectors (rubber-ring joint type)
AS 1646-1992 Elastomeric seals for waterworks purposes

ATS 5200.047-2005 Technical Specification for plumbing and drainage products Self-sealing devices
AS 5200.000-2006 Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018)
AS 1172.5:2019 Sanitary plumbing products Baths for ablutionary purposes
ATS 5200.040-2005 Waste pipe connection outlets and gratings, separate or integral
ATS 5200.050-2005 Technical Specification for plumbing and drainage products Prefabricated bathroom modules
ATS 5200.104-2005 Appliances (miscellaneous)
AS/NZS 1730:1996 Washbasins
AS/NZS 1260:1996 PVC pipes and fittings for drain, waste and vent applications
AS 3494-1997 Bidettes and bidets
AS 3982-1991 Urinals
AS/NZS 1260:2009 PVC-U pipes and fittings for drain, waste and vent application
AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent applications
MP 52-2005 Manual of authorization procedures for plumbing and drainage products
AS/NZS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
AS/NZS 2023:1995 Baths for ablutionary purposes
MP 52-1997 Manual of authorization procedures for plumbing and drainage products
AS 1756-1999 Household sinks
AS/NZS 1229:1997 Laundry troughs and tubs
AS 3861-1991 Spa baths (Reconfirmed 2016)
AS/NZS 1229:2002 Laundry troughs and tubs
ATS 5200.101-2005 Appliances (low hazard rating)
AS 5200.000-2005 Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products
AS 1172.4:2019 Sanitary plumbing products Washbasins
ATS 5200.482-2006 Technical Specification for plumbing and drainage products Soil waste dump fitting
AS/NZS 1254:2002 PVC pipes and fittings for storm and surface water applications
DR 01195 CP Laundry troughs and tubs
AS/NZS 3982:1996 Urinals
ATS 5200.460-2004 Technical Specification for plumbing and drainage products Grey water diversion valve assembly
AS/NZS 5065:2005 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017)
ATS 5200.012-2005 Technical Specification for plumbing and drainage products In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic
AS 1229-1991 Laundry troughs
MP 52-2001 Manual of authorization procedures for plumbing and drainage products
AS 3588-1996 Shower bases and shower modules (Reconfirmed 2016)
AS 1172.3:2019 Sanitary plumbing products Personal hygiene fixtures and appliances - Bidets and bidettes
AS 1589-1994 Copper and copper alloy waste fittings
AS 1589-2001 Copper and copper alloy waste fittings (Reconfirmed 2018)
AS/NZS 1260:2002 PVC-U pipes and fittings for drain, waste and vent application

View more information
US$60.92
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.