• There are no items in your cart

AS 3610-1995

Current
Current

The latest, up-to-date edition.

Formwork for concrete
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

04-05-1995

Preview

Specifies requirements for the design, fabrication, erection and stripping of formwork as well as the evaluation and repair of the formed concrete surface. Colour evaluation charts are included in an Appendix.

With the publication of AS 3610.1:2018, that publication stated that:

"The full review of AS 3610 series is in progress and therefore it was considered appropriate to issue the Standard in two Parts:

  1. AS 3610.1, Formwork for concrete, Part 1: Formwork specification (this Standard), focuses on surface finish and covers various types of documentation applicable to formwork. This Part was revised and published in 2010. This latest revision includes relevant commentary clauses from AS 3610 Supplement 2—1996 Formwork for concrete—Commentary;
  2. AS 3610.2, will cover aspects of formwork and falsework design, construction and testing, including Section 4 of AS 3610.1—2010.

NOTE: At the time of publication (16 April 2018), AS 3610-1995 is still under review.

AS 3610.2, AS 3610—1995 and AS 3610.1 will coexist. Sections 2, 3 and 5 in this Standard (AS 3610.1:2018) supersede Sections 2 and 3, as well as Clauses 4.7 and 6 of AS 3610—1995."

This Standard sets out requirements for the design, fabrication, erection and stripping of formwork, as well as the specification, evaluation and repair of the quality of the formed concrete surface and the influence of this activity on the design and construction of an in situ concrete structure. Design by testing is considered separately, the requirements being set out in Appendix A. Some Sections of the Standard are also applicable to precast concrete, in particular some aspects of Sections 3 and 5. This Standard does not apply to unformed concrete surfaces, e.g. tops of slabs.

Committee
BD-043
DocumentType
Standard
ISBN
0 7262 9658 9
Pages
70
PublisherName
Standards Australia
Status
Current
SupersededBy
Supersedes
UnderRevision

Under Revision see DR 99481. Draft Amendment 1 see DR 02319 CP First published in part as AS CA70-1971.AS CA72.1 first published 1971.AS 1082 first published 1971.AS CA70-1971 revised and redesignated AS 1509-1974.AS CA72.1-1971 revised and redesignated AS 1510.1-1974.AS CA70-1971 withdrawn 1976.AS 1082-1971, AS 1509-1974 and AS 1510.1-1974 revised, amalgamated and redesignated AS 3610-1990.Second edition 1995. First published in part as AS CA70-1971. AS CA72.1 first published 1971. AS 1082 first published 1971. AS CA70-1971 revised and redesignated AS 1509-1974. AS CA72.1-1971 revised and redesignated AS 1510.1-1974. AS CA70-1971 withdrawn 1976. AS 1082-1971, AS 1509-1974 and AS 1510.1-1974 revised, amalgamated and redesignated AS 3610-1990. Second edition 1995.

AS 1576-1974 Code of practice for metal scaffolding (known as the SAA Metal Scaffolding Code)
AS 3972-1997 Portland and blended cements
AS 2082-1979 Visually stress-graded hardwood for structural purposes
AS 4100-1998 Steel structures (Reconfirmed 2016)
AS/NZS 1170.2:2002 Structural design actions Wind actions
AS/NZS 2269:2004 Plywood - Structural
AS 4100-1990 Steel structures
AS 2858-1986 Timber - Softwood - Visually stress-graded for structural purposes
AS 1170.4-2007 Structural design actions Earthquake actions in Australia (Reconfirmed 2018)
AS 2271-1979 Plywood and blockboard for exterior use
AS 3600-2001 Concrete structures
AS 1657-1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 3600-1994 Concrete structures
AS 1170.2-1989 Minimum design loads on structures (known as the SAA Loading Code) Wind loads
AS 2858-2004 Timber - Softwood - Visually graded for structural purposes
AS 2082-2007 Timber - Hardwood - Visually stress-graded for structural purposes (Reconfirmed 2017)
AS 1720.1-1988 Timber structures (known as the SAA Timber Structures Code) - Design methods
CSA S269.1 : 2016 FALSEWORK AND FORMWORK
AS 1170.4-1993 Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads
AS 3700-1988 Masonry in buildings (known as the SAA Masonry Code)
AS/NZS 2269:1994 Plywood - Structural
AS/NZS 2271:2004 Plywood and blockboard for exterior use (Reconfirmed 2016)
AS 1664-1979 Rules for the use of aluminium in structures (known as the SAA Aluminium Structures Code) (incorporating Corrig.)
AS 3700-2001 Masonry structures

AS 3735-2001 Concrete structures for retaining liquids
AS 4065-1992 Concrete poles for overhead lines and street lighting
AS/NZS 1576.1:2010 Scaffolding General requirements
AS/NZS 1170.1:2002 Structural design actions Permanent, imposed and other actions
AS 5100.5-2004 Bridge design - Concrete
AS 3958.1-1991 Ceramic tiles - Guide to the installation of ceramic tiles
AS 3600-2001 Concrete structures
AS 3600-1994 Concrete structures
AS 3958.1-2007 Ceramic tiles Guide to the installation of ceramic tiles
AS/NZS 4058:2007 Precast concrete pipes (pressure and non-pressure)
AS 3610.1-2010 Formwork for concrete Documentation and surface finish
AS 3850.3-1992 Tilt-up concrete and precast concrete elements for use in buildings - Guide to the erection of precast concrete members
AS/NZS 4576:1995 Guidelines for scaffolding
AS/NZS 4065:2010 Concrete utility services poles
AS 1085.14-2003 Railway track material Prestressed concrete sleepers
AS/NZS 4065:2000 Concrete utility services poles
AS/NZS 1170.0:2002 Structural design actions General principles
HB 67-1995 Concrete practice on building sites
AS/NZS 3845:1999 Road safety barrier systems
AS 6669-2007 Plywood - Formwork
AS/NZS 1170.1 SUPP 1:2002 Structural design actions Permanent, imposed and other actions - Commentary (Supplement to AS/NZS 1170.1:2002) (Reconfirmed 2016)
AS 3600-2009 Concrete structures
AS/NZS 2327:2017 Composite structures - Composite steel-concrete construction in buildings
HB 31-1992 Handbook of building construction tolerances - Extracts from building products and structures Standards
AS 3850.2-1990 Tilt-up concrete and precast concrete elements for use in buildings - Guide to design, casting and erection of tilt-up panels
AS 2327.1-1996 Composite structures - Simply supported beams
AS 2783-1992 Use of reinforced concrete for small swimming pools
AS 3850-2003 Tilt-up concrete construction

View more information
US$94.64
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.