• There are no items in your cart

AS 4100-1998

AvailableSuperseded
AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Steel structures (Reconfirmed 2016)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

06-05-1998

Preview

This Standard sets out minimum requirements for the design, fabrication, erection, and modification of steelwork in structures in accordance with the limit states design method. This Standard applies to buildings, structures and cranes constructed of steel.

This Standard sets out minimum requirements for the design, fabrication, erection, and modification of steelwork in structures in accordance with the limit states design method. This Standard applies to buildings, structures and cranes constructed of steel.This Standard is intended to apply also to roadway, railway, and pedestrian bridges. However, the requirements given in this Standard may not always be sufficient for bridge applications. In these circumstances, the specifications of the relevant Authority shall be used.This Standard does not apply to the following structures and materials:(a) Steel elements less than 3 mm thick, with the exception of sections complying with AS 1163 and packers.(b) Steel members for which the value of the yield stress used in design (fy) exceeds 450 MPa.(c) Cold-formed members, other than those complying with AS 1163, which shall be designed in accordance with AS/NZS 4600.(d) Composite steel-concrete members, which shall be designed in accordance with AS 2327.NOTE: The general principles of design, fabrication, erection, and modification embodied in this Standard may be applied to steel-framed structures or members not specifically mentioned herein.

Committee
BD-001
DocumentType
Standard
ISBN
0 7337 1981 3
Pages
209
ProductNote
Reconfirmed 03/06/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 03/06/2016
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes
UnderRevision

First published as CA1-1933.Second edition 1939.AS CA1-1939 revised and redesignated in part as INT 351-1952.AS CA45 first published 1966.INT 351-1952 revised and redesignated as AS CA1-1968.Second edition AS CA45-1970.Fourth edition AS CA1-1972.AS 1250 first published 1972.AS CA45-1970 revised and redesignated as AS 1511-1973.AS CA1-1972 and AS 1250-1972 revised, amalgamated and redesignated as AS 1250-1975.Third edition AS 1250-1981.Second edition AS 1511-1984.AS 1250-1981 and AS 1511-1984 revised, amalgamated and redesignated in part as AS 4100-1990.Second edition 1988.Reconfirmed 2016. Originated in part as SAA INT 351-1956. Previous edition AS 4100-1990. Second edition 1998. Reissued incorporating Amendment No. 1 (February 2012).

AS 1391-2007 Metallic materials - Tensile testing at ambient temperature
AS 2205.2.1-1997 Methods for destructive testing of welds in metal Transverse butt tensile test
AS 2074-2003 Cast steels
AS 1858.1-1986 Electrodes and fluxes for submerged-arc welding - Carbon steels and carbon-manganese steels
AS 3600-2001 Concrete structures
AS 2670.2-1990 Evaluation of human exposure to whole-body vibration - Continuous and shock-induced vibration in buildings (1 to 80 Hz)
AS 1170.2-1989 Minimum design loads on structures (known as the SAA Loading Code) Wind loads
AS 2203-1981 Carbon steel electrodes, cored (for arc welding)
AS 2205.2.1-2003 Methods for destructive testing of welds in metal Transverse butt tensile test
AS 1418.3-1997 Cranes, hoists and winches Bridge, gantry, portal (including container cranes) and jib cranes (Reconfirmed 2016)
AS/NZS 1112:1996 ISO metric hexagon nuts, including thin nuts, slotted nuts and castle nuts
AS 1418.5-2002 Cranes, hoists and winches - Mobile cranes
AS 2670-1983 Vibration and shock - Guide to the evaluation of human exposure to whole body vibration
AS/NZS 1873.4:2003 Powder-actuated (PA) hand-held fastening tools - Fasteners
AS 1581-1973 Dental mercury
AS 1735.1-2003 Lifts, escalators and moving walks General requirements
AS/NZS 1873.2:2003 Powder-actuated (PA) hand-held fastening tools - Design and construction
AS/NZS 1873.4:1994 Powder-actuated (PA) hand-held fastening tools - Fasteners
AS/NZS 1554.5:1995 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 1170.3-1990 Minimum design loads on structures (known as the SAA Loading Code) - Snow loads
AS 1418.5-1995 Cranes (including hoists and winches) - Mobile and vehicle-loading cranes
AS/NZS 1873.3:1994 Powder-actuated (PA) hand-held fastening tools - Charges
AS/NZS 1873.1:1994 Powder-actuated (PA) hand-held fastening tools Selection, operation and maintenance
AS 2370-1980 PVAC emulsion adhesives for wood
AS 2214-1994 Certification of welding supervisors - Structural steel welding
AS 1101.3-1987 Graphical symbols for general engineering - Welding and non-destructive examination
AS 2074-1982 Steel castings
AS/NZS 1553.1:1995 Covered electrodes for welding - Low carbon steel electrodes for manual metal-arc welding of carbon steels and carbon-manganese steels
AS 1530.4-1990 Methods for fire tests on building materials, components and structures Fire-resistance tests of elements of building construction
AS/NZS 2717.1:1996 Welding - Electrodes - Gas metal arc - Ferritic steel electrodes
AS 3600-1994 Concrete structures
AS/NZS 1554.1:1995 Structural steel welding Welding of steel structures
AS 2214-2004 Certification of welding supervisors - Structural steel welding
AS/NZS 1170.2:2002 Structural design actions Wind actions
AS/NZS 3679.2:1996 Structural steel - Welded I sections
AS/NZS 1873.1:2003 Powder-actuated (PA) hand-held fastening tools - Selection, operation and maintenance
AS 1391-1991 Methods for tensile testing of metals
AS 1170.4-1993 Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads
AS/NZS 1170.1:2002 Structural design actions Permanent, imposed and other actions
AS 2670.1-1990 Evaluation of human exposure to whole-body vibration General requirements
AS/NZS 1873.2:1994 Powder-actuated (PA) hand-held fastening tools Design and construction
AS/NZS 1873.3:2003 Powder-actuated (PA) hand-held fastening tools - Charges
AS/NZS 1594:2002 Hot-rolled steel flat products (Reconfirmed 2016)
AS 1275-1985 Metric screw threads for fasteners (Reconfirmed 2017)
AS 1735.1-1999 Lifts, escalators and moving walks - General requirements
AS/NZS 1110:1995 ISO metric precision hexagon bolts and screws
AS 1101.3-2005 Graphical symbols for general engineering Welding and non-destructive examination
AS/NZS 1559:1997 Hot-dip galvanized steel bolts and associated nuts and washers for tower construction
AS 1170.1-1981 Minimum design loads on structures (known as the SAA Loading Code) Dead and live loads
AS 1210-1997 Pressure vessels
AS/NZS 1111:1996 ISO metric hexagon commercial bolts and screws
AS/NZS 1594:1997 Hot-rolled steel flat products
AS 2327.1-1996 Composite structures - Simply supported beams
AS 1163-1991 Structural steel hollow sections
AS/NZS 1252:1996 High-strength steel bolts with associated nuts and washers for structural engineering
AS 1554.2-1993 Structural steel welding - Stud welding (steel studs to steel)
AS/NZS 1554.5:2004 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 1170.4-2007 Structural design actions Earthquake actions in Australia (Reconfirmed 2018)
AS 1418.1-2002 Cranes, hoists and winches General requirements
AS 2327.1-2003 Composite structures Simply supported beams
AS/NZS 1554.1:2004 Structural steel welding Welding of steel structures
AS 2670.1-2001 Evaluation of human exposure to whole-body vibration General requirements (Reconfirmed 2016)
AS 1657-1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS/NZS 3678:1996 Structural steel - Hot-rolled plates, floorplates and slabs
AS/NZS 3679.1:1996 Structural steel Hot-rolled bars and sections
AS 1530.4-2005 Methods for fire tests on building materials, components and structures Fire-resistance test of elements of construction
AS 1210-1989 Unfired Pressure Vessels (known as the SAA Unfired Pressure Vessels Code)

AS 3995-1994 Design of steel lattice towers and masts
AS 2304:2019 Water storage tanks for fire protection systems
AS 1988.1-2006 Welding of ferrous castings - Steel castings
AS/NZS 4676:2000 Structural design requirements for utility services poles
AS/NZS 1576.1:2010 Scaffolding General requirements
AS 1418.18-2001 Cranes, hoists and winches Crane runways and monorails
AS 1940:2017 The storage and handling of flammable and combustible liquids
AS/NZS 1554.1:2004 Structural steel welding Welding of steel structures
AS/NZS 1577:2013 Scaffold decking components
AS/NZS 2041.6:2010 Buried corrugated metal structures Bolted plate structures
AS 2159-1995 Piling - Design and installation
AS 2159-1995 Piling - Design and installation
AS 4326-2008 The storage and handling of oxidizing agents
AS/NZS 1163:2016 Cold-formed structural steel hollow sections
AS 4425-1996 Above ground burial structures
AS 1725.3-2010 Chain link fabric fencing Tennis court fencing - Private/Residential (Reconfirmed 2020)
AS 1657-2013 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS/NZS 4613:2017 Automotive equipment - Brake force measuring instruments
AS 5047-2005 Hydraulic shoring and trench lining equipment
AS 5100.6 SUPP 1-2007 Bridge design Steel and composite construction - Commentary (Supplement to AS 5100.6 - 2004)
AS/NZS 1100.501:2002 Technical drawing Structural engineering drawing (Reconfirmed 2014)
AS 4744.1-2000 Steel shoring and trench lining - Design
AS/NZS 7000:2016 Overhead line design
AS 3780-1994 The storage and handling of corrosive substances
AS 2214-2004 Certification of welding supervisors - Structural steel welding
AS 3610-1995 Formwork for concrete
AS/NZS 1554.4:2004 Structural steel welding - Welding of high strength quenched and tempered steels
AS/NZS 5070.1:2008 Siting and operation of radiocommunications facilities General guidelines for fixed, mobile and broadcasting facilities including fixed location satellite earth stations independent of the operating frequency (Reconfirmed 2019)
AS/NZS 4677:2010 Steel utility services poles
AS/NZS 1576.1:1995 Scaffolding General requirements
AS/NZS 1554.7:2006 Structural steel welding Welding of sheet steel structures
AS 1530.4-2005 Methods for fire tests on building materials, components and structures Fire-resistance test of elements of construction
AS/NZS 4994.1(INT):2004 Temporary roof edge protection for housing and residential buildings General requirements
AS 4997-2005 Guidelines for the design of maritime structures
AS 1210-2010 Pressure vessels (Reconfirmed 2021)
AS/NZS 4600:2005 Cold-formed steel structures
AS/NZS 1554.5:2011 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 4084-2012 Steel storage racking
AS 4722-2009 Passenger ropeways and passenger conveyors
AS 3785.8-1994 Underground mining - Shaft equipment Personnel conveyances in other than vertical shafts
AS/NZS 4994.4:2018 Temporary edge protection Perimeter Protection Screens
AS 1692-2006 Steel tanks for flammable and combustible liquids
AS 2870-2011 Residential slabs and footings
AS/NZS 3679.2:2016 Structural steel Welded I sections
AS/NZS 1554.4:2010 Structural steel welding Welding of high strength quenched and tempered steels
AS 4324.1-1995 Mobile equipment for continuous handling of bulk materials - General requirements for the design of steel structures
AS 2809.2:2020 Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids
AS/NZS 1554.6:2012 Structural steel welding Welding stainless steels for structural purposes
AS 2550.11-2004 Cranes, hoists and winches - Safe use - Vehicle-loading cranes
AS 2809.5-2001 Road tank vehicles for dangerous goods Tankers for bitumen-based products
AS 2159-2009 Piling - Design and installation
AS 2809.2-1999 Road tank vehicles for dangerous goods - Tankers for flammable liquids
AS/NZS 3678:2016 Structural steel - Hot-rolled plates, floorplates and slabs
AS 1418.1-2002 Cranes, hoists and winches General requirements
AS 1940-2004 The storage and handling of flammable and combustible liquids
AS 3533.3-2003 Amusement rides and devices In-service inspection (Reconfirmed 2013)
AS 5216:2018 Design of post-installed and cast-in fastenings in concrete
AS 3700:2018 Masonry Structures
AS 4326-1995 The storage and handling of oxidizing agents
AS/NZS 1252.1:2016 High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers Technical requirements
SA HB 108-2013 Timber design handbook
AS 1657-1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 4773.2-2010 Masonry in small buildings - Construction
AS/NZS 2041.2:2011 Buried corrugated metal structures Installation
AS 3610 SUPP 2-1996 Formwork for concrete - Commentary (Supplement to AS 3610-1995)
AS/NZS 3679.1:2016 Structural steel Hot-rolled bars and sections
AS 2067-2008 Substations and high voltage installations exceeding 1 kV a.c.
AS/NZS 2699.3:2000 Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS 1725.4-2010 Chain link fabric fencing Cricket net fencing enclosures (Reconfirmed 2020)
AS 2809.4-2001 Road tank vehicles for dangerous goods - Tankers for toxic and corrosive cargoes
AS 4678-2002 Earth-retaining structures
AS 3780-2008 The storage and handling of corrosive substances
AS 1577-1993 Scaffold planks
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 3700-2011 Masonry structures
AS/NZS 4677:2000 Steel utility services poles
AS 2192-2002 Sterilizers - Steam - Downward-displacement
AS 1725.2-2010 Chain link fabric fencing Tennis court fencing - Commercial (Reconfirmed 2020)
AS 2809.2-2008 Road tank vehicles for dangerous goods - Road tank vehicles for flammable liquids
AS 4852.1-2009 Variable message signs - Fixed signs
AS 2327.1-2003 Composite structures Simply supported beams
AS/NZS 2699.3:2002 Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS 3533.1-2009 Amusement rides and devices Design and construction
AS 1576.4-1991 Scaffolding - Suspended scaffolding
AS/NZS 3679.1:1996 Structural steel Hot-rolled bars and sections
AS 2316.1-2009 Artificial climbing structures and challenge courses Fixed and mobile artificial climbing and abseiling walls
AS 2699.3:2020 Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS 1576.6:2020 Scaffolding Metal tube-and-coupler scaffolding - Deemed to conform to AS/NZS 1576.1
AS/NZS 1554.5:2004 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 1720.1-1997 Timber structures Design methods
AS/NZS 7000:2010 Overhead line design - Detailed procedures
AS 1725.1-2010 Chain link fabric fencing Security fences and gates - General requirements (Reconfirmed 2020)
AS/NZS 1577:2018 Scaffold decking components
AS 3785.6-1992 Underground mining - Shaft equipment - Guides and rubbing ropes for conveyances
AS 2067:2016 Substations and high voltage installations exceeding 1 kV a.c.
AS 4100 SUPP 1-1999 Steel structures - Commentary (Supplement to AS 4100-1998)
AS 1210-1997 Pressure vessels
AS 1228:2016 Pressure equipment - Boilers
AS/NZS 3679.1:2010 Structural steel Hot-rolled bars and sections
AS 4425:2020 Above‑ground burial structures
AS/NZS 2927:2001 The storage and handling of liquefied chlorine gas
AS/NZS 3785.8:2016 Underground mining - Shaft equipment Conveyances for inclined shafts
AS/NZS 1554.1:2000 Structural steel welding Welding of steel structures
AS/NZS 3785.4:2002 Underground mining - Shaft equipment Conveyances for vertical shafts
AS 2339:2017 Traffic signal posts, mast arms and attachments
AS 1562.1-1992 Design and installation of sheet roof and wall cladding Metal (Reconfirmed 2016)
AS 3785.5-1998 Underground mining - Shaft equipment Headframes
AS 1562.3-2006 Design and installation of sheet roof and wall cladding Plastic (Reconfirmed 2018)
AS 1170.4-2007 Structural design actions Earthquake actions in Australia (Reconfirmed 2018)
AS/NZS 2179.1:1994 Specifications for rainwater goods, accessories and fasteners Metal shape or sheet rainwater goods, and metal accessories and fasteners
AS 1720.1-2010 Timber structures Design methods
AS/NZS 3678:1996 Structural steel - Hot-rolled plates, floorplates and slabs
AS/NZS 5131:2016 Structural steelwork - Fabrication and erection
AS 3958.2-1992 Ceramic tiles Guide to the selection of a ceramic tiling system
AS/NZS 3679.2:1996 Structural steel - Welded I sections
AS/NZS 3679.2:2010 Structural steel Welded I sections
AS 3962-2001 Guidelines for design of marinas
AS/NZS 3678:2011 Structural steel - Hot-rolled plates, floorplates and slabs
AS 1657:2018 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 3785.7-2006 Underground mining - Shaft equipment Sheaves (Reconfirmed 2023)
AS 2304-2011 Water storage tanks for fire protection systems
AS/NZS 1554.1:2011 Structural steel welding Welding of steel structures
AS/NZS 5100.6:2017 Bridge design Steel and composite construction
AS 2979-1998 Traffic signal mast arms
AS 4324.1:2017 Mobile equipment for continuous handling of bulk materials General requirements for the design of steel structures
AS 1725.5-2010 Chain link fabric fencing Sports ground fencing - General requirements (Reconfirmed 2020)
AS/NZS 4994.1:2009 Temporary edge protection General requirements

View more information
US$105.40
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.