• There are no items in your cart

AS/NZS 1170.2:2011

AvailableSuperseded
AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Structural design actions Wind actions (Reconfirmed 2016)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

03-30-2011

Preview

Provides requirements for determining wind actions for use in structural design. It includes revised sections on combination factors and cantilevered roofs and new provisions for torsion and windborne debris testing. It also provides for the treatment of doors as openings, and increased local pressure factors. Wind speeds and direction factors are given for regions in Australia and New Zealand. Factors are provided to cover the environment around the structure, the geometry of the structure and the dynamic interaction of the structure with the wind.

This Standard sets out procedures for determining wind speeds and resulting wind actions to be used in the structural design of structures subjected to wind actions other than those caused by tornadoes.The Standard covers structures within the following criteria:(a) Buildings less than or equal to 200 m high.(b) Structures with roof spans less than 100 m.(c) Structures other than offshore structures, bridges and transmission towers.NOTES:1 This Standard is a stand-alone document for structures within the above criteria. It may be used, in general, for all structures but other information may be necessary. 2 Where structures have natural frequencies less than 1 Hz, Section 6 requires dynamic analysis to be carried out (see Section 6).3 In this document, the words ‘this Standard’ indicate AS/NZS 1170.2, which is regarded as Part 2 of the AS/NZS 1170 series of Standards (see Preface).4 Further advice should be sought for geometries not described in this Standard, such as the roofs of podiums below tall buildings.

Committee
BD-006
DocumentType
Standard
ISBN
978 0 7337 9805 4
Pages
90
ProductNote
Reconfirmed 16/12/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 16/12/2016
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes
UnderRevision

First published in Australia as part of AS CA1-1933.Second edition AS CA1-1939.AS CA1-1939 revised and redesignated in part as Int 350-1952.Int 350-1952 revised and redesignated in part as AS CA34.2-1971.AS CA34.2-1971 revised and redesignated as AS 1170.2-1973.Second edition AS 1170.2-1975.Third edition AS 1170.2-1981.Fourth edition AS 1170.2-1983.Fifth edition AS 1170.2-1989.First published in New Zealand as part of NZS 1900:1964.NZS 1900:1964 revised and redesignated in part as NZS 4203:1976.Second edition NZS 4203:1984.Third edition NZS 4203:1992.AS 1170.2-1989 and NZS 4203:1992 jointly revised, amalgamated and redesignated in part as AS/NZS 1170.2:2002.Second edition 2011.Reconfirmed 2016. Originated in Australia as part of AS CA1-1933. Originated in New Zealand as part of NZS 1900:1964. Previous Australian edition AS 1170.2-1989. Previous New Zealand edition NZS 4203:1992. AS 1170.2-1989 and NZS 4203:1992 jointly revised, amalgamated and redesignated in part as AS/NZS 1170.2:2002. Second edition 2011. Reissued incorporating Amendment No. 1 (September 2012). Reissued incorporating Amendment No. 2 (December 2012). Reissued incorporating Amendment No. 3 (July 2013). Reissued incorporating Amendment No. 4 (August 2016). Reissued incorporating Amendment No. 5 (June 2017).

BS ISO 16932:2016 Glass in building. Destructive-windstorm-resistant security glazing. Test and classification
ISO 16932:2016 Glass in building — Destructive-windstorm-resistant security glazing — Test and classification
AS 4040.3-1992 Methods of testing sheet roof and wall cladding Resistance to wind pressures for cyclone regions (Reconfirmed 2016)
AS/NZS 1170.0:2002 Structural design actions General principles

AS 2699.2:2020 Built-in components for masonry construction Connectors and accessories
AS 4654.2-2012 Waterproofing membranes for external above-ground use Design and installation
AS 2304:2019 Water storage tanks for fire protection systems
AS 2118.1:2017 Automatic fire sprinkler systems General systems
AS 2593:2021 Boilers - Safety management and supervision systems
AS 4685.1:2014 Playground equipment and surfacing General safety requirements and test methods (EN 1176-1:2008, MOD)
AS 4055-2012 Wind loads for housing
AS 1657-2013 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS/NZS 7000:2016 Overhead line design
AS/NZS 4505:2012 Garage doors and other large access doors (Reconfirmed 2017)
AS 4084-2012 Steel storage racking
AS 2047-2014 Windows and external glazed doors in buildings
AS/NZS 4994.4:2018 Temporary edge protection Perimeter Protection Screens
AS 1562.1:2018 Design and installation of metal roof and wall cladding Metal
AS 3700:2018 Masonry Structures
AS 2144:2014 Traffic signal lanterns
AS 4040.3:2018 Methods of testing sheet roof and wall cladding Resistance to wind pressures for cyclone regions
SA HB 108-2013 Timber design handbook
AS 4685.0:2017 Playground equipment and surfacing Development, installation, inspection, maintenance and operation
HB 331-2012 Overhead line design
AS/NZS 5033:2012 Installation and safety requirements for photovoltaic (PV) arrays
AS 3700-2011 Masonry structures
AS/NZS 5139:2019 Electrical installations - Safety of battery systems for use with power conversion equipment
WS07-2012 Plywood Box Beam Construction for Detached Housing
AS 4204:2019 Headstones and cemetery monuments
AS 2067:2016 Substations and high voltage installations exceeding 1 kV a.c.
AS 1228:2016 Pressure equipment - Boilers
AS/NZS 3500.4:2018 Plumbing and drainage Heated water services
AS 4425:2020 Above‑ground burial structures
AS/NZS 2327:2017 Composite structures - Composite steel-concrete construction in buildings
AS/NZS 1576.4:2013 Scaffolding Suspended scaffolding
AS 2339:2017 Traffic signal posts, mast arms and attachments
AS 4852.2:2019 Variable message signs Portable signs
AS 1375-2013 Industrial fuel-fired appliances
AS 4852.1:2019 Variable message signs Fixed signs
AS 2050:2018 Installation of Roof Tiles
AS 5100.2:2017 Bridge design Design loads
AS 1657:2018 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 1720.3:2016 Timber structures Design criteria for timber-framed residential buildings
AS 2304-2011 Water storage tanks for fire protection systems
AS 4324.1:2017 Mobile equipment for continuous handling of bulk materials General requirements for the design of steel structures

View more information
US$115.79
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.