• There are no items in your cart

AS/NZS 1260:2009

AvailableSuperseded
AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

PVC-U pipes and fittings for drain, waste and vent application
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

06-16-2009

Preview

Specifies requirements for PVC-U pipes and fittings for sewer, drain, waste and vent applications above ground or below ground and is intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. The Standard includes requirements for both plain and structured wall pipes and fittings.

This Standard specifies requirements for PVC-U pipes and fittings for sewer, drain, waste and vent applications above ground or below ground and is intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. The Standard includes requirements for both plain and structured wall pipes and fittings. NOTE: Pipes manufactured to this Standard should be used and installed in accordance with AS/NZS 2032, AS/NZS 2566.1, AS/NZS 2566.2, AS/NZS 3500.2, AS/NZS 3500.5, WSA 02 and WSA 06.

Committee
PL-021
DocumentType
Standard
ISBN
0 7337 9166 2
Pages
56
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes
UnderRevision

First published in Australia as part of AS K138-1963 and AS A160-1969.Second edition AS K138-1967.Third edition AS K138-1969.AS K138-1969 and part of AS A160-1969 revised, amalgamated and redesignated as AS 1415.1-1974.AS A160-1969 revised and redesignated in part as AS 1415.2-1974, AS 1415.3-1974, AS 1415.4-1974, and AS 1415.5-1974.Second edition AS 1415.1-1984.Second edition AS 1415.3-1984.AS 1415.2-1974 and AS 1415.4-1974 revised, amalgamated and redesignated as AS 1415.2-1984.AS 1415.5-1974 revised and redesignated as AS 1415.4-1984.AS 1260.1 first published 1974.AS 1260.2 first published 1974.AS 1260.3 first published 1974.AS 1260.4 first published 1974.AS 1260.5 first published 1974.AS 2340 first published 1980.AS 1260.1-1974 and part of AS 1260.4-1974 revised, amalgamated and redesignated as AS 1260.1-1984.AS 1260.2-1974 and part of AS 1260.4-1974 revised, amalgamated and redesignated as AS 1260.2-1984.Second edition AS 1260.3-1984.AS 1260.5-1974 revised and redesignated as AS 1260.4-1984.Second edition AS 1260.5-1993.First published in New Zealand in part as NZS 7641:1978, NZS 7642:1971 and NZS 7649:1988.AS 1260.1-1984, AS 1260.2-1984, AS 1260.3-1984, AS 1260.4-1984, AS 1260.5-1993, AS 1415.1-1984, AS 1415.2-1984, AS 1415.3-1984, AS 1415.4-1984, AS 2340-1980, NZS 7641:1978, NZS 7642:1971 and NZS 7649:1988 jointly revised, amalgamated and redesignated as AS/NZS 1260:1996.Second edition 1999.Third edition 2002.Fourth edition 2009. Originated in Australia as part of AS K138-1963 and AS A160-1969. Originated in New Zealand in part as NZS 7641:1978, NZS 7642:1971 and NZS 7649:1988. Previous edition AS/NZS 1260:2002. Fourth edition 2009. Reissued incorporating Amendment No. 1 (April 2011). Reissued incorporating Amendment No. 2 (December 2013).

AS/NZS 1462.11:1996 Methods of test for PVC pipes and fittings Method for high temperature stress-relief testing of fittings (Reconfirmed 2017)
AS 2887-1993 Plastic waste fittings
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS/NZS 1477:2006 PVC pipes and fittings for pressure applications
AS/NZS 1462.13:2006 Methods of test for plastics pipes and fittings Method for the determination of elastomeric seal joint contact width and pressure (Reconfirmed 2017)
AS/NZS 1462.23:2006 Methods of test for plastics pipes and fittings Method for determination of ring flexibility
AS 2700-1996 Colour Standards for general purposes - Swatches
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS/NZS 1462.1:2006 Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings
AS/NZS 1462.15:1996 Methods of test for PVC pipes and fittings Method for determination of vinyl chloride monomer content (Reconfirmed 2017)
AS/NZS 1462.16:2006 Methods of test for plastics pipes and fittings Method for high temperature testing of pipe (Reconfirmed 2017)
AS 1172.1-2005 Water closets (WC) Pans
AS 1646-2007 Elastomeric seals for waterworks purposes (Reconfirmed 2018)
AS/NZS 2566.1:1998 Buried flexible pipelines Structural design
AS/NZS 3879:2006 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings
AS/NZS 2566.2:2002 Buried flexible pipelines Installation (Reconfirmed 2016)
AS 681.1-2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber
AS 1199.2-2003 Sampling procedures for inspection by attributes Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (Reconfirmed 2016)
AS/NZS 1462.3:1998 Methods of test for plastics pipes and fittings Method for determining the impact characteristics of pipes (Reconfirmed 2017)
AS 1199.0-2003 Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
AS/NZS 1462.5:2002 Methods of test for plastics pipes and fittings Vicat softening temperature (Reconfirmed 2017)
AS/NZS 3500.2:2003 Plumbing and drainage Sanitary plumbing and drainage
AS 1199.3-2003 Sampling procedures for inspection by attributes Skip-lot sampling procedures (Reconfirmed 2016)
AS/NZS 1462.2:2006 Methods of test for plastics pipes and fittings Method for determining the flattening properties of plastics pipes and fittings
AS/NZS 4765:2007 Modified PVC (PVC-M) pipes for pressure applications
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS/NZS 1462.22:1997 Methods of test for plastics pipes and fittings Method for determination of pipe stiffness
AS 1199.4-2003 Sampling procedures for inspection by attributes Procedures for assessment of declared quality levels (Reconfirmed 2016)
AS 681.2-2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers
AS/NZS 2032:2006 Installation of PVC pipe systems
AS/NZS 1462.8:2008 Methods of test for plastics pipes and fittings Method of testing the leaktightness of assemblies (Reconfirmed 2017)
AS/NZS 1462.4:2002 Methods of test for plastics pipes and fittings Method for determining reversion of plastics pipes (Reconfirmed 2017)
AS/NZS 3500.5:2000 National Plumbing and Drainage - Domestic installations

AS/NZS 3500.4:2015 Plumbing and drainage Heated water services
AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications
AS/NZS 3500.5:2012 Plumbing and drainage Housing installations
AS/NZS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
ATS 5200.501-2011 Technical Specification for plumbing and drainage products Anti-infiltration overflow-relief device
AS/NZS 5601.1:2013 Gas installations General installations
AS/NZS 5601.1:2010 Gas installations General installations
AS/NZS 3500.3:2015 Plumbing and drainage Stormwater drainage

View more information
US$118.31
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.