AS/NZS 1462.1:2006
Current
The latest, up-to-date edition.
Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
03-20-2006
This Standard sets out a method for determining the dimensions of plastics pipes and fittings.
This Standard sets out a method for determining the dimensions of plastics pipes and fittings (i.e. outside diameter, wall thickness, length, squareness of pipe ends and internal length, mouth diameter and root diameter of sockets).NOTE: Other methods, which can be shown to provide an accuracy of the same or of a higher degree, may be used.
Committee |
PL-045
|
DocumentType |
Standard
|
ISBN |
0 7337 7321 4
|
Pages |
8
|
ProductNote |
Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
First published in Australia as AS 1462.1-1973.Second edition 1984.Jointly revised and designated AS/NZS 1462.1:1996.Fourth edition 2001.Fifth edition 2006. Originated as AS 1462.1-1973. Jointly revised and redesignated AS/NZS 1462.1:1996. Fifth edition 2006.
AS 1984-1977 | Vernier callipers (metric series) |
AS 2102-1989 | Micrometer callipers for external measurement |
AS 1290.5-1999 | Linear measuring instruments used in construction - Coated and etched steel measuring tapes |
AS 1290.4-1995 | Linear measuring instruments used in construction - Retractable steel pocket rules |
AS 2101-1978 | Internal micrometers (including stick micrometers) (metric series) |
AS 2944.2-2007 | Plastics pipes and fittings for gas reticulation Polyamide fittings (Reconfirmed 2023) |
AS/NZS 1462.23:2006 | Methods of test for plastics pipes and fittings Method for determination of ring flexibility |
AS/NZS 1477:2017 | PVC pipes and fittings for pressure applications |
AS/NZS 1254:2010 | PVC-U pipes and fittings for stormwater and surface water applications |
AS 1273-1991 | Unplasticized PVC (UPVC) downpipe and fittings for rainwater (Reconfirmed 2018) |
AS/NZS 2492:2007 | Cross-linked polyethylene (PE-X) pipes for pressure applications |
AS/NZS 3518:2013 | Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications |
AS/NZS 1462.6:1998 | Methods of test for plastics pipes and fittings - Method for hydrostatic pressure testing of pipes |
ATS 5200.055-2008 | Technical specifications for plumbing and drainage products Plastics fittings - Connectors with flexible intermediate joints for drainage and sewerage applications |
AS 4176.8-2010 | Multilayer pipes for pressure applications Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for systems (ISO 17484-1:2006, MOD) |
AS ISO 6993.2-2007 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Fittings for a maximum operating pressure of 200 mbar (20 kPa) |
AS/NZS 4999:2006 | PVC-U maintenance shafts |
AS 4176.3-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Fittings (ISO 21003-3:2008, MOD) |
AS/NZS 4765:2007 | Modified PVC (PVC-M) pipes for pressure applications |
AS 5082.2-2007 | Polybutylene (PB) plumbing pipe systems - Metric series Mechanical and fusion jointing systems (Reconfirmed 2017) |
AS/NZS 1260:2009 | PVC-U pipes and fittings for drain, waste and vent application |
AS/NZS 1260:2017 | PVC-U pipes and fittings for drain, waste and vent applications |
AS/NZS 1477:2006 | PVC pipes and fittings for pressure applications |
ATS 5200.501-2011 | Technical Specification for plumbing and drainage products Anti-infiltration overflow-relief device |
ATS 5200.501-2009 | Technical Specification for plumbing and drainage products Anti-infiltration overflow relief point |
AS/NZS 1462.6:2008 | Methods of test for plastics pipes and fittings Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressure - Resistance to internal pressure (Reconfirmed 2017) |
AS 4176.2-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Pipes (ISO 21003-2:2008, MOD) (Reconfirmed 2022) |
AS 2943-2007 | Plastics pipes and fittings for gas reticulation - Polyamide compounds (Reconfirmed 2022) |
AS/NZS 2053.2:2001 | Conduits and fittings for electrical installations Rigid plain conduits and fittings of insulating material (Reconfirmed 2016) |
AS/NZS 1254:2002 | PVC pipes and fittings for storm and surface water applications |
AS 4441(INT)-2003 | Oriented PVC (PVC-O) pipes for pressure applications |
AS 5082.1-2007 | Polybutylene (PB) plumbing pipe systems - Metric series Metric polybutylene (PB) pipes for hot and cold water applications |
ATS 5200.491-2010 | Technical Specification for plumbing and drainage products Aluminium alloy piping system with plastics lining for plumbing water service applications |
AS/NZS 4765:2017 | Modified PVC (PVC-M) pipes for pressure applications |
AS ISO 6993.3-2007 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa) |
AS/NZS 2642.2:2008 | Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe for hot and cold water applications (Reconfirmed 2022) |
AS/NZS 2053.6:2001 | Conduits and fittings for electrical installations Profile-wall, smooth-bore conduits and fittings of insulating material (Reconfirmed 2016) |
AS 2944.1-2007 | Plastics pipes and fittings for gas reticulation Polyamide pipes (Reconfirmed 2023) |
AS/NZS 1260:2002 | PVC-U pipes and fittings for drain, waste and vent application |
AS ISO 6993.1-2007 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Pipes for a maximum operating pressure of 1 bar (100 kPa) (ISO 6993-1:2006, MOD) |
AS/NZS 4130:2009 | Polyethylene (PE) pipes for pressure applications |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.