Customer Support: +1 416-401-8730

Login to i2i Subscription Intertek.com
  • There are no items in your cart
Please enter a keyword to search
Advanced search

AS/NZS 1567:1997

AvailableSuperseded
AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

07-05-1997

Publisher

Standards Australia

Preview

1 - AS/NZS 1567:1997 - COPPER AND COPPER ALLOYS - WROUGHT RODS, BARS AND SECTIONS
4 - PREFACE
5 - CONTENTS
6 - 1 SCOPE
6 - 2 REFERENCED DOCUMENTS
7 - 3 DEFINITIONS
7 - 3.1 Bar
7 - 3.2 Batch
7 - 3.3 Hollow
7 - 3.4 Rod
7 - 3.5 Section
7 - 4 DESIGNATION
7 - 4.1 General
7 - 4.2 Alloy designation
7 - 4.3 Temper designation
7 - 5 TEMPER OF MATERIAL
7 - 6 CHEMICAL COMPOSITION
7 - 6.1 General
7 - 6.2 Chemical analysis
11 - 7 FREEDOM FROM DEFECTS
11 - 8 MECHANICAL PROPERTIES
11 - 8.1 Selection and preparation of test samples
11 - 8.2 Tensile test
11 - 8.3 Hardness test
11 - 8.4 Bend test
11 - 9 DEZINCIFICATION TEST
12 - 10 MERCUROUS NITRATE TEST
12 - 11 ELECTRICAL RESISTIVITY TEST
12 - 12 HYDROGEN EMBRITTLEMENT TEST
12 - 13 RETESTS
13 - 14 MANUFACTURING TOLERANCES
13 - 15 ROUNDING OF TEST RESULT VALUES
13 - 15.1 General
13 - 15.2 Tensile test results
13 - 16 MARKING
21 - APPENDIX A - PURCHASING GUIDELINES
21 - A1 GENERAL
21 - A2 INFORMATION TO BE SUPPLIEDBY THE PURCHASER
21 - A3 TEST REQUIREMENTS
21 - A3.1 Frequency of testing
21 - A3.2 Independent tests
23 - APPENDIX B - RELATED ALLOY DESIGNATIONS

Specifies requirements for wrought copper and copper alloy rods, bars and sections, including hollow sections, having a diameter or width across flats of not less than 1.6mm, for machining and general purposes other than forging. It contains a table which relates the alloy designations with other common designations.

This Standard specifies requirements for wrought copper and copper alloy rods, bars and sections, including hollow sections, having a diameter or width across flats of not less than 1.6 mm, for machining and general purposes other than forging.NOTE: Advice and recommendations on information to be supplied at the time of inquiry and order are contained in the purchasing guidelines set out in Appendix A.

Committee
MT/2
DocumentType
Standard
ISBN
0 7337 1093 X
Pages
18
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes

First published in Australia in part as AS H8-1932 (Being endorsement of BS 249-1926 without Amendment).AS H9 first published 1932 (Being endorsement of BS 250-1926 without Amendment).Second edition AS H8-1940 (Being endorsement of BS 249-1940 without Amendment).Second edition AS H9-1940 (Being endorsement of BS 250-1940 without Amendment).AS H3 first published 1940 (Being endorsement of BS 251-1940 without Amendment).AS H4 first published 1940 (Being endorsement of BS 252-1940 without Amendment).AS H12 first published 1940 (Being endorsement of BS 369-1940 without Amendment).Third edition AS H8-1961 (Being endorsement of BS 249:1953 without Amendment).Third edition AS H9-1961 (Being endorsement of BS 250-1960 without Amendment).Second edition AS H3-1968 (Being endorsement of BS 251-1963 without Amendment).Second edition AS H4-1968 (Being endorsement of BS 252-1963 without Amendment).Second edition AS H12-1968 (Being endorsement of BS 369-1963 without Amendment).Fourth edition AS H8-1968 (Being endorsement of BS 249-1963 without Amendment).AS H84 first published 1968 (Being endorsement of BS 1948-1963 without Amendment).AS H85 first published 1968 (Being endorsement of BS 1949-1963 without Amendment).AS H86 first published 1968 (Being endorsement of BS 2032-1963 without Amendment).AS H87 first published 1968 (Being endorsement of BS 2033-1963 without Amendment).AS H91 first published 1968 (Being endorsement of BS 2874-1962 without Amendment).AS H9-1961, AS H3-1968, AS H4-1968, AS H8-1968, AS H12-1968, AS H91-1968, and parts of AS H84-1968, AS H85-1968, AS H86-1968 and AS H87-1968 revised, amalgamated and redesignated AS 1567-1974.Second edition 1985.Jointly revised and designated AS/NZS 1567:1997. Originated in Australia in Part as AS H9-1961. Previous edition AS 1567-1985. Jointly revised and designated AS/NZS 1567:1997.

AS 1391-2007 Metallic materials - Tensile testing at ambient temperature
AS 1515.5-1987 Copper alloys - Determination of cadmium Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS 2345-2006 Dezincification resistance of copper alloys
AS 2505.2-2004 Metallic materials Bars, rods and solid shapes - Bend tests
AS 1817-1991 Metallic materials - Vickers hardness test
AS 1515.2-1994 Copper alloys Determination of manganese content - Flame atomic absorption spectrometric method
AS 2345-1992 Dezincification resistance of copper alloys
AS 2338-1980 Preferred dimensions of wrought metal products
AS 2136-1977 Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018)
AS 2338-2004 Preferred dimensions of wrought metal products
AS 1515.3-1989 Copper Alloys Determination of silver content - Flame atomic absorption spectrometric methods (Reconfirmed 2016)
AS 1515.4-1978 Methods for the analysis of copper alloys Electrolytic determination of copper in wrought and cast copper alloys
AS 2706-1984 Numerical values - Rounding and interpretation of limiting values
AS 1696.1-1987 Copper Determination of phosphorus - Spectrophotometric method
AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
AS 2505.2-1989 Methods for bend and related testing of metals Bars, rods and solid shapes
AS 1391-1991 Methods for tensile testing of metals
AS 2614-1998 Copper and copper alloys - Sampling for chemical and spectrochemical analysis, and physical testing (Reconfirmed 2016)
AS 1515.1-1994 Copper alloys Determination of lead in copper alloys (flame atomic absorption spectrometric method) (Reconfirmed 2016)

AS 2419.3-2012 Fire hydrant installations Fire brigade booster connections
ATS 5200.016-2010 Technical Specification for plumbing and drainage products Cistern inlet valves
AS 2427-2004 Smoke/heat release vents
AS 3517-2007 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018)
ATS 5200.004-2005 Technical Specification for plumbing and drainage products Urinal flushing cisterns
AS 1357.1-2004 Valves primarily for use in heated water systems - Protection valves
AS/NZS 2638.1:2011 Gate valves for waterworks purposes Metal seated (Reconfirmed 2022)
AS 2938-1993 Gears - Spur and helical - Guide to specification and rating
AS/NZS 2845.1:2010 Water supply - Backflow prevention devices Materials, design and performance requirements
AS 5200.037.2-2008 Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016)
ATS 5200.490-2007 Technical Specification for plumbing and drainage products Cross-linked polyethylene/ aluminium/polyethylene-composite pipe systems for pressure applications (Reconfirmed 2018)
AS/NZS 3499:2006 Water supply - Flexible hose assemblies (Reconfirmed 2016)
AS/NZS 1768:2007 Lightning protection
ATS 5200.020-2004 Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with mains supply
AS 1682.1-1990 Fire dampers Specification
AS 5830.1-2012 In-line ball valves for use in plumbing water supply systems Metal-bodied
AS 4032.1-2005 Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements
ATS 5200.468-2005 Technical Specification for plumbing and drainage products Hot water systems - Recirculation valves
AS 3688:2016 Water supply and gas systems - Metallic fittings and end connectors
AS 1172.2:2014 Sanitary plumbing products Flushing devices and cistern inlet and outlet valves
AS/NZS 2638.2:2011 Gate valves for waterworks purposes Resilient seated (Reconfirmed 2022)
ATS 5200.017-2005 Technical Specification for plumbing and drainage products Cistern outlet valves
ATS 5200.464-2004 Technical Specification for plumbing and drainage products - Hot water manual or sensor-activated pumping systems
AS 4032.2-2005 Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices (Reconfirmed 2015)
AS 2419.2-1994 Fire hydrant installations - Fire hydrant valves
AS 4793:2020 Mechanical tapping bands for waterworks purposes
ATS 5200.425-2009 Technical Specification for plumbing and drainage products Water closet (WC) suite with integral odour control device (OCD) connected to sanitary plumbing and drainage system
AS 4747.2-2013 Meters for non-urban water supply Technical requirements for closed conduit meters fully charged
ATS 5200.476-2006 Technical Specification for plumbing and drainage products Heated water systems - Leak protection device
AS/NZS 3188:1995 Approval and test specification - Terminations and glands for mineral-insulated metal-sheathed cables
AS 1357.2-2005 Valves primarily for use in heated water systems Control valves (Reconfirmed 2015)
AS 1628-1999 Water supply - Metallic gate, globe and non-return valves
AS 4041-2006 Pressure piping (Reconfirmed 2016)
ATS 5200.478-2006 Technical Specification for plumbing and drainage products Cross-linked polyethylene/Aluminium/Cross-linked polyethylene macro-composite pipe systems for pressure applications
AS/NZS 4793:2009 Mechanical tapping bands for waterworks purposes
ATS 5200.420-2005 Technical Specification for plumbing and drainage products Trap-priming valves
ATS 5200.477-2006 Technical Specification for plumbing and drainage products Rainwater/mains supply changeover devices
ATS 5200.007-2004 Technical Specification for plumbing and drainage products - Water hammer arrestors
AS 4747.3-2013 Meters for non-urban water supply Technical requirements for open channel meters
AS 5081-2008 Hydraulically operated automatic control valves for waterworks purposes (Reconfirmed 2016)
ATS 5200.489-2009 Technical Specification for plumbing and drainage products Stainless steel flexible assemblies for plumbing applications
AS 4956-2008 Air valves for water supply
ATS 5200.037.1-2006
AS 2419.2-2009 Fire hydrant installations Fire hydrant valves
AS 4795.1-2011 Butterfly valves for waterworks purposes Wafer and lugged (Reconfirmed 2022)
AS 4795-2002 Double-flanged butterfly valves for waterworks purposes
AS 3637.2-2005 Underground mining - Winding suspension equipment Detaching hooks
AS 4883:2017 Air valves for sewerage
ATS 5200.030-2012 Technical Specification for plumbing and drainage products Solenoid valves
AS 2638.2-2006 Gate valves for waterworks purposes - Resilient seated
AS/NZS 3718:2005 Water supply - Tap ware (Reconfirmed 2016)
ATS 5200.021-2004 Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with break tank supply
ATS 5200.467-2004 Technical Specification for plumbing and drainage products Rainwater tank connection valve
ATS 5200.482-2006 Technical Specification for plumbing and drainage products Soil waste dump fitting
ATS 5200.466-2004 Technical Specification for plumbing and drainage products - Rainwater tank connection devices
ATS 5200.472-2006 Technical Specification for plumbing and drainage products Heated water system recirculation device
AS 6401-2003 Knife-gate valves for waterworks purposes (Reconfirmed 2015)
AS 4795-2006 Butterfly valves for waterworks purposes
AS 1910-2004 Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016)
AS 4032.4:2014 Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures
ATS 5200.012-2005 Technical Specification for plumbing and drainage products In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic
ATS 5200.046-2005 Technical Specification for plumbing and drainage products Diversion systems - Wash down and first flush
ATS 4747.2-2008 Meters for non-urban water supply Specification for closed conduit meters fully charged
ATS 5200.016-2005 Technical Specification for plumbing and drainage products - Cistern inlet valves
AS 5612-2013 Butterfly valves for general purposes
AS 1210-1997 Pressure vessels
ATS 5200.475-2006 Technical Specification for plumbing and drainage products Heated Water Systems - Cold water recovery device
AS 4956:2017 Air valves for water supply
AS 1357.1-2009 Valves primarily for use in heated water systems Protection valves
ATS 5200.481-2006 Technical Specification for plumbing and drainage products Thermal switching valves
ATS 4747.3-2008 Meters for non-urban water supply - Specifications for open channel meters
AS 5200.007-2008 Plumbing and drainage products Metal-bodied water hammer arresters
AS 2638.1-1999 Sluice valves for waterworks purposes - Metal seated
AS 1562.1-1992 Design and installation of sheet roof and wall cladding Metal (Reconfirmed 2016)
AS 2738-2000 Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018)
AS 2345-2006 Dezincification resistance of copper alloys
AS/NZS 2179.1:1994 Specifications for rainwater goods, accessories and fasteners Metal shape or sheet rainwater goods, and metal accessories and fasteners
AS/NZS 2785:2000 Suspended ceilings - Design and installation
ATS 5200.052-2005 Metallic-bodied inlet pressure control valves greater than DN 50
AS 4795.2-2011 Butterfly valves for waterworks purposes Double flanged
ATS 5200.479-2006 Flood stop safety valve
ATS 5200.030-2004 Technical Specification for plumbing and drainage products - Solenoid valves
AS 3688-2005 Water supply - Metallic fittings and end connectors
AS/NZS 1768(INT):2003 Lightning protection
AS 1589-2001 Copper and copper alloy waste fittings (Reconfirmed 2018)
ATS 5200.030-2007 Technical Specification for plumbing and drainage products Solenoid valves
AS 4794-2001 Non-return valves for waterworks purposes - Swing check and tilting disc (Reconfirmed 2015)
AS 5830.2-2012 In-line ball valves for use in plumbing water supply systems Plastics-bodied
AS 2419.3-1996 Fire hydrant installations - Fire brigade booster connections
ATS 5200.485-2006 Pressure compensating tank
ATS 5200.486-2008 Technical Specification for plumbing and drainage products Sprinklers for home applications

View more information
US$48.74
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

or

Get in touch with us