• There are no items in your cart

AS/NZS 1595:1998

Current
Current

The latest, up-to-date edition.

Cold-rolled, unalloyed, steel sheet and strip (Reconfirmed 2016)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

07-05-1998

Preview

Specifies requirements for cold-rolled, unalloyed, steel sheet and strip, supplied as both coil and cut lengths to chemical composition only, or to strength, hardness or formability requirements. It also specifies two surface finishes (lustre and matt) and three levels of surface quality.

This Standard specifies requirements for cold-rolled, unalloyed, steel sheet and strip, supplied as both coil and cut lengths to chemical composition only, or to strength, hardness or formability requirements.Provision is made for three temper-rolled grades produced to hardness requirements, five grades to strength requirements (including one weather resistant grade) and five grades to formability requirements. In addition, two surface finishes are specified, and provision is made for three levels of surface quality.NOTES:1 Advice and recommendations on information to be supplied by the purchaser at the time of enquiry and order are contained in the purchasing guidelines set out in Appendix A.2 Alternative means for demonstrating compliance with this Standard are given in Appendix B.

Committee
MT-001
DocumentType
Standard
ISBN
0 7337 2011 0
Pages
15
ProductNote
Reconfirmed 10/06/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 10/06/2016
PublisherName
Standards Australia
Status
Current
Supersedes

First published in Australia in part as AS G2-1945.Revised and redesignated AS G16-1967.AS G23 first published 1968.AS G16-1967 revised and redesignated AS 1595.1-1974.AS G23-1968 revised and redesignated AS 1595.2-1974.AS 1595.1-1974 and AS 1595.2-1974 revised, amalgamated and redesignated AS 1595-1981.Jointly revised and designated AS/NZS 1595:1998.Reconfirmed 2016. Originated in Australia in part as AS G2-1945. Final Australian edition AS 1595-1981. Jointed revised and designated AS/NZS 1595:1998.

AS 1391-2007 Metallic materials - Tensile testing at ambient temperature
AS 2403-1980 Method for the measurement of the plastic strain ratio 'r' of sheet and strip metals
AS/NZS ISO 9000.1:1994 Quality management and quality assurance standards Guidelines for selection and use
AS 2505.1-1981 Methods for bend and related testing of metals Sheet, strip and plate
AS/NZS 1365:1996 Tolerances for flat-rolled steel products (Reconfirmed 2016)
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
AS/NZS ISO 9004.1:1994 Quality management and quality system elements Guidelines
AS 1815-1991 Metallic materials - Rockwell hardness test
AS 2706-1984 Numerical values - Rounding and interpretation of limiting values
AS/NZS 1050.1:1996 Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis
AS 1391-1991 Methods for tensile testing of metals
AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS 2505.1-2004 Metallic materials Sheet, strip and plate - Bend tests
AS 2025-1991 Metallic materials - Rockwell superficial hardness test - N and T scales
AS 1199-1988 Sampling procedures and tables for inspection by attributes

AS/NZS 3845.2:2017 Road safety barrier systems and devices Road safety devices
AS/NZS 1554.1:2004 Structural steel welding Welding of steel structures
AS 1172.5:2019 Sanitary plumbing products Baths for ablutionary purposes
AS/NZS 4600:2018 Cold-formed steel structures
AS 1138-1992 Thimbles for wire rope
AS 3983-1991 Metal drums for insulated electric cables and bare conductors (Reconfirmed 2016)
AS/NZS 4677:2010 Steel utility services poles
AS/NZS 1554.2:2003 Structural steel welding Stud welding (steel studs to steel)
AS/NZS 1554.7:2006 Structural steel welding Welding of sheet steel structures
AS/NZS 4600:2005 Cold-formed steel structures
AS/NZS 1554.5:2011 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS/NZS 1730:1996 Washbasins
AS/NZS 2023:1995 Baths for ablutionary purposes
AS 1756-1999 Household sinks
AS 2552-1982 Steel sheet and strip - Terne (lead-tin alloy) coated
AS 2905-2005 Steel drums
AS 1321.2-1975 Methods for the sampling and testing of adhesives Corrosive effect of set adhesives on metals
AS/NZS 1229:2002 Laundry troughs and tubs
AS 2551-1982 Steel sheet and strip - Cold-rolled, electrolytic zinc-coated
AS/NZS 4677:2000 Steel utility services poles
AS 1172.4:2019 Sanitary plumbing products Washbasins
AS/NZS 3845:1999 Road safety barrier systems
DR 01195 CP Laundry troughs and tubs
AS 2143-1978 Industrial and commercial steel shelving
AS/NZS 1554.5:2004 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 2662.1-1983 Corrosion inhibition (rust-proofing) - Motor vehicles - Product
AS 2273-1979 Steel library shelving
AS 1138-2008 Thimbles for wire rope (Reconfirmed 2019)
AS 3588-1996 Shower bases and shower modules (Reconfirmed 2016)
AS/NZS 1554.1:2000 Structural steel welding Welding of steel structures
AS/NZS 1580.104.1:2000 Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013)
AS/NZS 2785:2000 Suspended ceilings - Design and installation
AS 2756-1997 Low-voltage switchgear and controlgear - Mounting rails for mechanical support of electrical equipment (Reconfirmed 2016)
AS/NZS 1554.1:2011 Structural steel welding Welding of steel structures

View more information
US$48.59
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.