• There are no items in your cart

AS/NZS 1866:1997

Current
Current

The latest, up-to-date edition.

Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes (Reconfirmed 2020)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

09-05-1997

Preview

1 - AS/NZS 1866:1997 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD, BAR, SOLID AND HOLLOW SHAPES
4 - PREFACE
5 - CONTENTS
7 - SECTION 1 SCOPE AND GENERAL
7 - 1.1 SCOPE
7 - 1.2 REFERENCED DOCUMENTS
7 - 1.3 DEFINITIONS
7 - 1.3.1 Bar
8 - 1.3.2 Batch
8 - 1.3.3 Circumscribing circle diameter (or circle size)
8 - 1.3.4 Die line
8 - 1.3.5 Finish
8 - 1.3.6 Machining stock
8 - 1.3.7 Rod
8 - 1.3.8 Semi-hollow section
8 - 1.4 DESIGNATION
8 - 1.4.1 General
8 - 1.4.2 Alloy designation
8 - 1.4.3 Temper designation
8 - 1.5 CLASSIFICATION OF HOLLOW EXTRUDED SHAPES
9 - 1.6 ROUNDING OF TEST RESULTS VALUES
9 - 1.6.1 General
9 - 1.6.2 Measured dimensions
9 - 1.6.3 Tensile test results
10 - 1.7 MARKING
10 - 1.8 TRACEABILITY
11 - SECTION 2 MANUFACTURING REQUIREMENTS
11 - 2.1 SCOPE
11 - 2.2 CHEMICAL COMPOSITION
11 - 2.2.1 General
11 - 2.2.2 Chemical analysis
11 - 2.3 SURFACE FINISH
11 - 2.4 FREEDOM FROM DEFECTS
11 - 2.5 MECHANICAL PROPERTIES
11 - 2.6 MANUFACTURING TOLERANCES
17 - SECTION 3 MECHANICAL TESTING REQUIREMENTS
17 - 3.1 SCOPE
17 - 3.2 SAMPLING FOR MECHANICAL TESTING
17 - 3.3 LOCATION AND PREPARATION OF TENSILE TEST PIECES
17 - 3.3.1 General
17 - 3.3.2 Rod and bar
17 - 3.3.3 Shapes
18 - 3.3.4 Tubular products
18 - 3.4 TENSILE TEST
18 - 3.5 RETESTING
19 - SECTION 4 MANUFACTURING TOLERANCES
19 - 4.1 SCOPE
19 - 4.2 DIAMETER TOLERANCES FOR EXTRUDED MACHINING ROD (ALLOYS 2011 AND 6262 ONLY)
19 - 4.3 DISTANCE-ACROSS-FLATS TOLERANCES FOR EXTRUDED MACHINING HEXAGONAL BAR (ALLOYS 2011 AND 6262 ONLY)
20 - 4.4 DIAMETER, WIDTH AND DEPTH TOLERANCES FOR CLASS A HOLLOW SHAPES
21 - 4.5 WALL THICKNESS TOLERANCES FOR CLASS A HOLLOW SHAPES
21 - 4.6 CROSS-SECTIONAL TOLERANCES FOR ROD, BAR, SOLID SHAPES AND CLASS B, C AND D HOLLOW SHAPES
21 - 4.6.1 General
25 - 4.6.2 Examples illustrating the use of Table 4.6
27 - 4.7 LENGTH TOLERANCES
27 - 4.8 TWIST TOLERANCES
27 - 4.8.1 General
28 - 4.8.2 Conversion of twist tolerance to a linear value
29 - 4.9 STRAIGHTNESS TOLERANCES
30 - 4.10 FLATNESS (FLAT SURFACE) TOLERANCES
31 - 4.11 TOTAL TRANSVERSE FLATNESS TOLERANCES
31 - 4.12 ANGULARITY TOLERANCES
32 - 4.13 CONTOUR TOLERANCES
32 - 4.14 CORNER AND FILLET RADII TOLERANCES
33 - 4.15 SQUARENESS-OF-CUT-ENDS TOLERANCE
34 - SECTION 5 YACHT MASTS
34 - 5.1 SCOPE
34 - 5.2 CROSS-SECTIONAL DIMENSION TOLERANCES
36 - 5.3 TWIST TOLERANCES
37 - APPENDIX A - PURCHASING GUIDELINES
37 - A1 GENERAL
37 - A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
37 - A3 TEST REQUIREMENTS
37 - A3.1 Tensile test
37 - A3.2 Independent tests
38 - A4 SURFACE FINISH
39 - APPENDIX B - TYPICAL FABRICATION CHARACTERISTICS AND APPLICATION DATA

Specifies requirements for aluminium and aluminium alloy extruded rod, bar, solid and hollow shape products for general engineering purposes. Chemical composition and mechanical properties are specified, and allowable tolerances on dimensions are included for rod, bar, solid shapes, and Class A, Class B, Class C and Class D hollow shapes. Examples illustrating the use of tolerance are included.

This Standard specifies requirements for aluminium and aluminium alloy extruded rod, bar, solid and hollow products for general engineering purposes.NOTES:Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in the purchasing guidelines set out in Appendix A.Typical fabrication characteristics and application data for wrought aluminium and aluminium alloys are given in Appendix B.

Committee
MT-003
DocumentType
Standard
ISBN
0 7337 1218 5
Pages
38
ProductNote
Reconfirmed 21/08/2020.
This standard has been reconfirmed in Australia in 2020 and remains current in New Zealand. Reconfirmation Notice 21/08/2020
PublisherName
Standards Australia
Status
Current
Supersedes
UnderRevision

First published in Australia as part of AS H46-1948.
AS H50 first published 1950.
Second edition 1962.
Third edition 1971.
AS H50-1971 and AS H46-1948 revised, amalgamated and redesignated AS 1866-1976.
Second edition 1986.
Jointly revised and designated AS/NZS 1866:1997.
Reconfirmed 2020. Originated in Australia as AS H50-1971. Previous edition AS 1866-1986. Jointly revised and designated AS/NZS 1866:1997.

AS 1391-2007 Metallic materials - Tensile testing at ambient temperature
AS 2338-1980 Preferred dimensions of wrought metal products
AS 1817-1991 Metallic materials - Vickers hardness test
AS 2338-2004 Preferred dimensions of wrought metal products
AS 1816-1990 Metallic materials - Brinell hardness test
AS 2706-1984 Numerical values - Rounding and interpretation of limiting values
AS 2504-1981 Rigid aluminium busbars
AS 2612-1997 Aluminium and aluminium alloys - Sampling for chemical and spectrochemical analysis
AS 2848.1-1998 Aluminium and aluminium alloys - Compositions and designations Wrought products (Reconfirmed 2018)
AS 1391-1991 Methods for tensile testing of metals
AS 2025-1991 Metallic materials - Rockwell superficial hardness test - N and T scales
AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
AS 1815-1991 Metallic materials - Rockwell hardness test

AS 2427-2004 Smoke/heat release vents
AS/NZS 1576.1:2010 Scaffolding General requirements
AS 4085-1992 Automatic sliding door assemblies
AS/NZS 1576.2:2016 Scaffolding Couplers and accessories
AS/NZS 1577:2013 Scaffold decking components
AS 4132.2-1993 Boat and ship design and construction - Aluminium construction
AS 4647-2005 Domestic diaphragm gas meters
AS/NZS 1768:2007 Lightning protection
AS 3868-1991 Earth-moving machinery - Design guide for access systems
AS 2047-1999 Windows in buildings - Selection and installation
AS 4312-2008 Atmospheric corrosivity zones in Australia
AS/NZS 4994.1(INT):2004 Temporary roof edge protection for housing and residential buildings General requirements
AS 4312:2019 Atmospheric corrosivity zones in Australia
AS 1799.5-1990 Small pleasure boats code - Aluminium construction
AS/NZS 3500.5:2012 Plumbing and drainage Housing installations
AS 5007-2007 Powered doors for pedestrian access and egress (Reconfirmed 2018)
AS 2047-2014 Windows and external glazed doors in buildings
AS/NZS 1576.2:2009 Scaffolding Couplers and accessories
AS 1154.1-2009 Insulator and conductor fittings for overhead power lines Performance, material, general requirements and dimensions (Reconfirmed 2019)
AS 2809.2:2020 Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids
AS 2809.2-1999 Road tank vehicles for dangerous goods - Tankers for flammable liquids
AS/NZS 4576:1995 Guidelines for scaffolding
AS/NZS 3500.3:2003 Plumbing and drainage Stormwater drainage
AS/NZS 1892.1:1996 Portable ladders Metal
AS 4041-2006 Pressure piping (Reconfirmed 2016)
AS 1657-1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 2809.4-2001 Road tank vehicles for dangerous goods - Tankers for toxic and corrosive cargoes
AS 1577-1993 Scaffold planks
AS 2809.2-2008 Road tank vehicles for dangerous goods - Road tank vehicles for flammable liquids
AS 4285:2019 Rooflights
AS 4290-2000 Design and installation of Revolving doors
AS/NZS 1576.3:1995 Scaffolding Prefabricated and tube-and-coupler scaffolding
AS/NZS 3500.3:2018 Plumbing and drainage Stormwater drainage
AS 4254.2-2012 Ductwork for air-handling systems in buildings Rigid duct
AS 4254-2002 Ductwork for air-handling systems in buildings
AS 1154.1-2004 Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions
AS 1576.4-1991 Scaffolding - Suspended scaffolding
AS/NZS 3500.5:2000 National Plumbing and Drainage - Domestic installations
AS 1231-2000 Aluminium and aluminium alloys - Anodic oxidation coatings
AS/NZS 1577:2018 Scaffold decking components
AS/NZS 1576.5:1995 Scaffolding Prefabricated splitheads and trestles
AS/NZS 1576.4:2013 Scaffolding Suspended scaffolding
AS/NZS 2179.1:1994 Specifications for rainwater goods, accessories and fasteners Metal shape or sheet rainwater goods, and metal accessories and fasteners
AS/NZS 2785:2000 Suspended ceilings - Design and installation
AS 2809.4:2017 Road tank vehicles for dangerous goods Tankers for toxic and corrosive cargoes
AS 4285-2007 Skylights
AS 1576.2-1991 Scaffolding Couplers and accessories
AS/NZS 1768(INT):2003 Lightning protection
AS/NZS 3500.3:2015 Plumbing and drainage Stormwater drainage
AS/NZS 1665:2004 Welding of aluminium structures (Reconfirmed 2016)
AS/NZS 4994.1:2009 Temporary edge protection General requirements
AS 6001-1999 Working platforms for housing construction

View more information
US$82.57
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.