• There are no items in your cart

AS/NZS 2327:2017

Current
Current

The latest, up-to-date edition.

Composite structures - Composite steel-concrete construction in buildings
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

12-20-2017

Preview

Sets out minimum requirements for the design, detailing and construction of simply supported composite beams composed of a steel beam interconnected to a concrete slab by shear connectors, including applications in which the slab incorporates profiled steel sheeting. Covers strength and serviceability design for flexure, transverse and longitudinal shear and their interdependence as well as design for fire-resistance. Permits the use of partial shear connection and a wider variety of steel beam sections and shear connector types than previously allowed. Includes detail requirements for construction loads, slab reinforcement and sheer connector positioning, along and transverse to the beam length. Also included are a number of appendices containing design flowcharts and other helpful information.

This Standard sets out minimum requirements for the design, detailing and construction of composite steel-concrete members (beams, columns, slabs, joints) in buildings.This Standard does not cover the design of composite beams and columns—(a) where the elements of the steel section are less than 3 mm thick or the value of the yield stress (fy) assumed in design exceeds 690 MPa;(b) where the concrete characteristic compressive strength at 28 days is outside the range of 20 MPa to 100 MPa; or(c) for road or railway bridges (see NOTE).NOTE: For the design of composite bridge beams, reference should be made to AS/NZS 5100.6 the AUSTROADS Bridge Design Code.

Committee
BD-032
DevelopmentNote
New PDF incorporating Amendment 1.
DocumentType
Standard
ISBN
978 1 76035 970 6
Pages
261
PublisherName
Standards Australia
Status
Current
Supersedes
UnderRevision

Originated in Australia as AS 1480 Supplement 1-1974.Previous edition AS 2327.1-2003.Jointly revised and redesignated as AS/NZS 2327:2017. Originated in Australia as AS 1480 Supplement 1-1974. Previous edition AS 2327.1-2003. Jointly revised and redesignated as AS/NZS 2327:2017. Reissued incorporating Amendment No. 1 (June 2020).

AS 1012.12.1-1998 Methods of testing concrete Determination of mass per unit volume of hardened concrete - Rapid measuring method (Reconfirmed 2014)
AS/NZS 1554.4:2014 Structural steel welding Welding of high strength quenched and tempered steels
AS 1530.4:2014 Methods for fire tests on building materials, components and structures Fire-resistance tests for elements of construction
AS/NZS 1554.1:2014 Structural steel welding Welding of steel structures
AS 3610-1995 Formwork for concrete
AS/NZS 1170.0:2002 Structural design actions General principles
AS 3610 SUPP 2-1996 Formwork for concrete - Commentary (Supplement to AS 3610-1995)
AS 1163-1991 Structural steel hollow sections
AS/NZS 1365:1996 Tolerances for flat-rolled steel products (Reconfirmed 2016)
AS 1012.12.2-1998 Methods of testing concrete Determination of mass per unit volume of hardened concrete - Water displacement method (Reconfirmed 2014)
AS 1111.1:2015 ISO metric hexagon bolts and screws - Product grade C Bolts
AS 3597-2008 Structural and pressure vessel steel - Quenched and tempered plate
AS/NZS 1252.2:2016 High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers Verification testing for bolt assemblies
AS/NZS 3679.1:2016 Structural steel Hot-rolled bars and sections
AS 1111.2:2015 ISO metric hexagon bolts and screws - Product grade C Screws
AS/NZS 1252.1:2016 High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers Technical requirements
AS/NZS 4671:2001 Steel reinforcing materials
AS/NZS 3679.2:2016 Structural steel Welded I sections
AS 2327.1-2003 Composite structures Simply supported beams
AS/NZS 2425:2015 Bar chairs in reinforced concrete - Product requirements and test methods
AS/NZS 4600:2005 Cold-formed steel structures
AS 3600-2009 Concrete structures
AS 1275-1985 Metric screw threads for fasteners (Reconfirmed 2017)
AS/NZS 1163:2016 Cold-formed structural steel hollow sections
AS 1112.4:2015 ISO metric hexagon nuts Chamfered thin nuts - Product grades A and B
AS/NZS 1170.2:2011 Structural design actions Wind actions (Reconfirmed 2016)
AS/NZS 5100.6:2017 Bridge design Steel and composite construction
AS 1110.2:2015 ISO metric hexagon bolts and screws - Product grades A and B Screws
AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
AS 1110.1:2015 ISO metric hexagon bolts and screws - Product grades A and B Bolts
AS/NZS 3678:2016 Structural steel - Hot-rolled plates, floorplates and slabs
AS 1170.4-2007 Structural design actions Earthquake actions in Australia (Reconfirmed 2018)
AS/NZS 1594:2002 Hot-rolled steel flat products (Reconfirmed 2016)
AS 1112.2:2015 ISO metric hexagon nuts Style 2 - Product grades A and B
AS 1112.1:2015 ISO metric hexagon nuts Style 1 - Product grades A and B
AS 1112.3:2015 ISO metric hexagon nuts Product grade C
AS/NZS 1554.2:2003 Structural steel welding Stud welding (steel studs to steel)
AS 1579-2001 Arc-welded steel pipes and fittings for water and wastewater (Reconfirmed 2018)
AS 1379-2007 Specification and supply of concrete (Reconfirmed 2017)
AS/NZS 1170.1:2002 Structural design actions Permanent, imposed and other actions

View more information
US$196.91
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.