AS/NZS 2785:2000
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
05-29-2020
English
01-01-2000
Sets out minimum requirements for the design, construction, installation, maintenance and testing of internal and external non-trafficable suspended ceiling systems of dry construction with suspension systems attached to a supporting structure, for use in commercial, industrial and residential applications,
This Standard sets out the minimum requirements for the design, construction, installation, maintenance and testing of internal and external non-trafficable suspended ceiling systems of dry construction with suspension systems attached to a supporting structure. It is intended for use in commercial, industrial and residential applications. NOTE: Alternative methods for demonstrating compliance with this Standard, such as installation of external ceilings, are described in Appendix A.
Committee |
BD-035
|
DocumentType |
Standard
|
ISBN |
0 7337 3510 X
|
Pages |
43
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
First published as AS 2785-1985.Jointly revised and designated as AS/NZS 2785:2000. First published as AS 2785-1985. Jointly revised and designated as AS/NZS 2785:2000.
AS/NZS 2312:1994 | Guide to the protection of iron and steel against exterior atmospheric corrosion |
AS/NZS 1170.1:2002 | Structural design actions Permanent, imposed and other actions |
AS/NZS 1530.3:1999 | Methods for fire tests on building materials, components and structures Simultaneous determination of ignitability, flame propagation, heat release and smoke release (Reconfirmed 2016) |
AS 2946-1991 | Suspended ceilings, recessed luminaires and air diffusers - Interface requirements for physical compatibility |
AS/NZS 2728:1997 | Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements |
AS/NZS 1594:2002 | Hot-rolled steel flat products (Reconfirmed 2016) |
AS/NZS 1170.2:2002 | Structural design actions Wind actions |
AS/NZS 2499:2000 | Acoustics - Measurements of sound insulation in buildings and of buildings elements - Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it (Reconfirmed 2016) |
AS/NZS 4600:2005 | Cold-formed steel structures |
AS 2038-1977 | Methods for detecting the susceptibility of austenitic stainless steels to intergranular corrosion |
AS 1449-1994 | Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip |
AS 1444-2007 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017) |
AS 1170.2-1989 | Minimum design loads on structures (known as the SAA Loading Code) Wind loads |
AS 1397-2001 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
AS/NZS 1573:1995 | Copper and copper alloys - Wire for engineering purposes (Reconfirmed 2020) |
AS/NZS 4534:2006 | Zinc and zinc/aluminium-alloy coatings on steel wire (Reconfirmed 2017) |
AS 1789-2003 | Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017) |
AS 4055-2006 | Wind loads for housing |
AS 3715-2002 | Metal finishing - Thermoset powder coatings for architectural applications of aluminium and aluminium alloys |
AS/NZS 1866:1997 | Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes (Reconfirmed 2020) |
AS 1874-2000 | Aluminium and aluminium alloys - Ingots and castings (Reconfirmed 2018) |
AS 2105-1992 | Inorganic zinc silicate paint |
AS 2728-1984 | Prepainted and organic film/metal laminate products - Performance requirements for interior/exterior applications in buildings |
AS 4055-1992 | Wind loads for housing |
AS/NZS 1734:1997 | Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (Reconfirmed 2020) |
AS/NZS 1595:1998 | Cold-rolled, unalloyed, steel sheet and strip (Reconfirmed 2016) |
AS/NZS 1865:1997 | Aluminium and aluminium alloys - Drawn wire, rod, bar and strip (Reconfirmed 2020) |
AS 3715-1989 | Metal finishing - Thermoset powder coatings for architectural applications |
AS/NZS 4600:1996 | Cold-formed steel structures |
AS 1170.1-1989 | Minimum design loads on structures (known as the SAA Loading Code) Dead and live loads and load combinations |
AS 1045-1988 | Acoustics - Measurement of sound absorption in a reverberation room |
AS/NZS 1867:1997 | Aluminium and aluminium alloys - Drawn tubes (Reconfirmed 2020) |
AS 2848.1-1998 | Aluminium and aluminium alloys - Compositions and designations Wrought products (Reconfirmed 2018) |
AS 4506-2005 | Metal finishing - Thermoset powder coatings |
AS 1530.4-1997 | Methods for fire tests on building materials, components and structures Fire-resistance tests of elements of building construction |
AS 1444-1996 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties |
AS 1650-1989 | Hot-dipped galvanized coatings on ferrous articles |
AS/NZS 3679.1:1996 | Structural steel Hot-rolled bars and sections |
AS 2331.3.1-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray test (NSS test) (Reconfirmed 2017) |
AS 1170.4-1993 | Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads |
AS 1657-1992 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
AS 1720.2-2006 | Timber structures Timber properties |
AS/NZS 4534:1998 | Zinc and zinc/aluminium-alloy coatings on steel wire |
AS 1170.4-2007 | Structural design actions Earthquake actions in Australia (Reconfirmed 2018) |
AS 1789-1984 | Electroplated coatings - Zinc on iron or steel |
AS 1791-1986 | Chromate conversion coatings - Zinc and cadmium |
AS 1530.4-2005 | Methods for fire tests on building materials, components and structures Fire-resistance test of elements of construction |
AS 2331.3.1-1980 | Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray (NSS) test |
AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
AS 2841-1986 | Galvanized steel wire strand |
AS/NZS 1167.2:1999 | Welding and brazing - Filler metals Filler metal for welding |
AS/NZS 2728:2007 | Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements |
AS/NZS 2589.1:1997 | Gypsum linings in residential and light commercial construction - Application and finishing Gypsum plasterboard |
AS/NZS 2311:2000 | Guide to the painting of buildings |
AS/NZS 4506:1998 | Metal finishing - Thermoset powder coatings |
AS 1566-1997 | Copper and copper alloys - Rolled flat products (Reconfirmed 2018) |
AS/NZS 1594:1997 | Hot-rolled steel flat products |
AS/NZS 3750.9:1994 | Paints for steel structures - Organic zinc-rich primer |
AS 2841-2005 | Galvanized steel wire strand (Reconfirmed 2016) |
AS 1163-1991 | Structural steel hollow sections |
AS 1397-1993 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
AS 1720.1-1997 | Timber structures Design methods |
AS 1720.2-1990 | Timber structures Timber properties |
AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
AS 2834-1995 | Computer accommodation |
AS 2946-1991 | Suspended ceilings, recessed luminaires and air diffusers - Interface requirements for physical compatibility |
AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 2589:2007 | Gypsum linings - Application and finishing |
AS/NZS 2589:2017 | Gypsum linings - Application and finishing |
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 2293.1:2018 | Emergency lighting and exit signs for buildings System design, installation and operation |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.