• There are no items in your cart

AS/NZS 3190:2011

AvailableSuperseded
AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Approval and test specification - Residual current devices (current-operated earth-leakage devices)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

11-21-2011

Preview

Specifies essential safety requirements for residual current devices. It is to be read in conjunction with AS/NZS 3100.

This Standard specifies essential safety requirements for residual current devices and residual current relays intended to isolate supply or initiate a 'tripping' signal to isolate supply to protected circuits, socket-outlets or equipment in the event of a current flow to earth, which exceeds a predetermined level, and-(a) have rated residual currents not exceeding 300 mA; (b) have rated load currents not exceeding 125 A a.c.;(c) are designed for use at low voltage; and(d) are classified in accordance with Clause 4.The devices may be fixed or portable or, may be integral with a switching device or miniature overcurrent circuit breaker or, may be supplied as a separate attachment.This Standard does not apply to-(i)devices intended to be used with a particular circuit breaker other than a miniature overcurrent circuit-breaker, as defined in AS/NZS 3111 or AS/NZS 60898.1; or(ii)devices intended to protect an electricity authority distribution system; or(iii)devices for the protection of equipment for mines and covered by the AS/NZS 2081 series of Standards.

Committee
EL-004
DocumentType
Standard
ISBN
978 0 7337 9971
Pages
44
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes
UnderRevision

Originated in Australia as AS 3190-1974.First New Zealand edition AS/NZS 3190:2002.Previous edition AS/NZS 3190:2009.Eighth edition 2011. Originated in Australia as AS 3190 1974. First New Zealand edition AS/NZS 3190:2002. Previous edition AS/NZS 3190:2009. Eighth edition 2011.

AS/NZS 3117:2007 Approval and test specification - Bayonet lampholders
AS/NZS 61347.2.8:2003 Lamp controlgear Particular requirements for ballasts for fluorescent lamps (IEC 61347-2-8:2000, MOD) (Reconfirmed 2019)
AS 60529-2004 Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018)
AS 60068.2.30-2003 Environmental testing Tests - Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle)
AS/NZS 60898.2:2004 Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. and d.c. operation (IEC 60898-2, Ed. 1.1 (2003) MOD) (Reconfirmed 2016)
AS/NZS 3012:2010 Electrical installations - Construction and demolition sites
AS/NZS 3120:2011 Approval and test specification - Cord extension sockets
AS/NZS 3105:2007 Approval and test specification - Electrical portable outlet devices
AS/NZS 60898.1:2004 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. operation (IEC 60898-1, Ed. 1.2 (2003) MOD)
AS/NZS 61009.1:2011 Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBOs) General rules (IEC 61009-1, Ed. 3.0 (2010) MOD)
AS/NZS 3002:2008 Electrical installations - Shows and carnivals
AS/NZS 60227.5:2003 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Flexible cables (cords)
AS/NZS 3191:2008 Electric flexible cords (Reconfirmed 2019)
AS/NZS 3112:2011 Approval and test specification - Plugs and socket-outlets
AS/NZS 3001:2008 Electrical installations - Transportable structures and vehicles including their site supplies
AS/NZS 3197:2005 Approval and test specification - Portable electrical control or conditioning devices
AS 1931.1-1996 High-voltage test techniques - General definitions and test requirements
AS/NZS 60245.4:2003 Rubber insulated cables - Rated voltage up to and including 450/750 V Cords and flexible cables
AS/NZS 3123:2005 Approval and test specification - Plugs, socket-outlets and couplers for general industrial application (Reconfirmed 2016)
AS/NZS 3111:2009 Approval and test specification - Miniature overcurrent circuit-breakers (Reconfirmed 2020)
AS/NZS 61008.1:2011 Residual current operated circuit breakers without integral overcurrent protection for household and similar uses (RCCBs) General rules (IEC 61008-1, Ed. 3.0 (2010) MOD)
AS/NZS 2081:2011 Electrical protection devices for mines and quarries (Reconfirmed 2022)
AS/NZS 3140:2007 Approval and test specification - Edison-type screw lampholders
AS/NZS 3100:2009 Approval and test specification - General requirements for electrical equipment

AS/NZS 3105:2012 Approval and test specification - Electrical portable outlet devices
AS/NZS 3105:2014 Approval and test specification - Electrical portable outlet devices
AS/NZS 3190:2016 Approval and test specification - Residual current devices (current operated earth-leakage devices)
AS/NZS 1576.4:2013 Scaffolding Suspended scaffolding

View more information
US$98.41
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.