• There are no items in your cart

AS/NZS 3439.1:2002

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Low-voltage switchgear and controlgear assemblies Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

08-16-2023

Language(s)

English

Published date

12-11-2002

Preview

Specifies requirements for type-tested and partially type-tested low-voltage switchgear and controlgear assemblies. Specifies service conditions, construction requirements, technical characteristics and tests. This Standard contains the full text of IEC 60439-1:1999 but has been modified for Australian/New Zealand conditions.

This International Standard applies to low-voltage switchgear and controlgear ASSEMBLIES (type-tested ASSEMBLIES (TTA) and partially type-tested ASSEMBLIES (PTTA)), the rated voltage of which does not exceed 1 000 V a.c. at frequencies not exceeding 1 000 Hz, or 1 500 V d.c.This standard also applies to ASSEMBLIES incorporating control and/or power equipment, the frequencies of which are higher. In this case, appropriate additional requirements will apply. This standard applies to stationary or movable ASSEMBLIES with or without enclosure. NOTE Additional requirements for certain specific types of ASSEMBLIES are given in supplementary IEC standards. This standard applies to ASSEMBLIES intended for use in connection with the generation, transmission, distribution and conversion of electric energy, and for the control of electric energy consuming equipment. It also applies to ASSEMBLIES designed for use under special service conditions, for example in ships, in rail vehicles, for machine tools, for hoisting equipment or in explosive atmospheres, and for domestic (operated by unskilled persons) applications, provided that the relevant specific requirements are complied with. This standard does not apply to individual devices and self-contained components, such as motor starters, fuse switches, electronic equipment, etc. complying with their relevant standards. The object of this standard is to lay down the definitions and to state the service conditions, construction requirements, technical characteristics and tests for low-voltage switchgear and controlgear ASSEMBLIES.

Committee
EL-006
DocumentType
Standard
ISBN
0 7337 4877 5
Pages
130
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

Standards Relationship
IEC 60439-1:1999 Identical
IEC 60439-1:1999+AMD1:2004 CSV Identical

First published as AS 1136-1974.Second edition 1980.Revised and redesignated AS 1136.1-1988.Revised and redesignated AS 3439.1-1993.Jointly revised and designated as AS/NZS 3439.1:2002. First published as AS 1136-1974. Second edition 1980. Revised and redesignated AS 1136.1-1988. Revised and redesignated AS 3439.1-1993. Jointly revised and designated as AS/NZS 3439.1:2002.

AS 1852.604-1988 International electrotechnical vocabulary Generation, transmission and distribution of electricity - Operation
AS/NZS 3947.4.1:2001 Low-voltage switchgear and controlgear Contactors and motor-starters - Electromechanical contactors and motor-starters
AS/NZS 60269.3.0:2000 Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)
AS/NZS 61000.3.7:2001 Electromagnetic compatibility (EMC) Limits - Assessment of emission limits for fluctuating loads in MV and HV power systems (IEC 61000-3-7:1996, MOD)
AS 1852.826-1983 International electrotechnical vocabulary - Electrical installations of buildings
AS 2467-1981 Maintenance of electrical switchgear
AS 1931.2-1996 High-voltage test techniques - Measuring systems
AS/NZS 60269.3.1:2002 Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Sections I to IV: Examples of types of standardized fuses
AS 1939-1990 Degrees of protection provided by enclosures for electrical equipment (IP Code)
AS/NZS 3947.3:2001 Low-voltage switchgear and controlgear Switches, disconnectors, switch-disconnectors and fuse-combination units
AS/NZS 4695.112:1996 Fire hazard testing of electrotechnical products Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
AS/NZS 61000.3.6:2001 Electromagnetic compatibility (EMC) Limits - Assessment of emission limits for distorting loads in MV and HV power systems (IEC 61000-3-6:1996, MOD)
AS/NZS CISPR 11:2004 Industrial scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 61000.4.3:2006 Electromagnetic compatibility (EMC) Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
AS/NZS 5000.1:1999 Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 kV
AS/NZS 60269.1:2000 Low-voltage fuses General requirements
AS 1852.471-1988 International electrotechnical vocabulary - Insulators
AS/NZS 60269.2.0:2000 Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)
AS 3702-1989 Item designation in electrotechnology
AS 1104-1978 Informative symbols for use on electrical and electronic equipment
AS 4388-1996 A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear
AS 3865-1991 Calculation of the effects of short-circuit currents
AS/NZS 60269.2.1:2001 Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to V: Examples of types of standardized fuses
AS/NZS 3947.1:2001 Low-voltage switchgear and controlgear General rules
AS/NZS 61000.4.3:1999 Electromagnetic compatibility (EMC) Testing and measurement techniques - Radiated radio-frequency electromagnetic field immunity test
AS/NZS 60269.4.0:2000 Low-voltage fuses Supplementary requirements for fuse-links for the protection of semiconductor devices
AS 1931.1-1996 High-voltage test techniques - General definitions and test requirements
AS/NZS 61000.4.5:2006 Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test
AS 4278-1995 A method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA)
AS 60038-2000 Standard voltages
AS 1824.1-1995 Insulation co-ordination Definitions, principles and rules
AS 1852.441-1985 International electrotechnical vocabulary - Switchgear, controlgear and fuses
AS/NZS 61000.4.5:1999 Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test
AS/NZS 5000.1:2005 Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 (1.2) kV (Reconfirmed 2017)

AS 62208-2006 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
AS/NZS 3010:2017 Electrical installations - Generating sets
AS/NZS 4871.1:2010 Electrical equipment for mines and quarries General requirements
AS/NZS 3439.4:2009 Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for construction sites (ACS)
AS 1418.14-1996 Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions
AS 60947.4.2-2004 Low-voltage switchgear and controlgear Contactors and motor-starters - A.C. semiconductor motor controllers and starters
AS/NZS 3439.2:2002 Low-voltage switchgear and controlgear assemblies Particular requirements for busbar trunking systems (busways)
AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3439.5:2009 Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks
AS 4278-1995 A method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA)
AS 60204.1-2005 Safety of machinery - Electrical equipment of machines General requirements (IEC 60204-1, Ed. 5 (FDIS) MOD)
AS 3439.4-1995 Low-voltage switchgear and controlgear assemblies - Particular requirements for assemblies for construction sites (ACS)
AS 1735.5-2003 Lifts, escalators and moving walks Lifts, escalators and moving walks
AS 61330-2005 High-voltage/low-voltage prefabricated substations
AS/NZS 4871.1:2012 Electrical equipment for mines and quarries General requirements
AS 60947.7.2-2004 Low-voltage switchgear and controlgear Ancillary equipment - Protective conductor terminal blocks for copper conductors
AS 4388-1996 A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear
AS/NZS 3947.1:2001 Low-voltage switchgear and controlgear General rules
AS/NZS 3007:2013 Electrical equipment in mines and quarries - Surface installations and associated processing plant
AS 60947.1-2004 Low-voltage switchgear and controlgear General rules
AS 62040.1.2-2003 Uninterruptible power systems (UPS) General and safety requirements for UPS used in restricted access locations

View more information
US$178.29
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.