• There are no items in your cart

ASME PV CODE 8 DIV 2 : 2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES
Available format(s)

Hardcopy

Superseded date

07-02-2019

Language(s)

English

Published date

01-01-2017

List of Sections
Foreword
Statement of Policy on the Use of the Certification
 Mark and Code Authorization in Advertising
Statement of Policy on the Use of ASME Marking to
 Identify Manufactured Items
Submittal of Technical Inquiries to the Boiler and
 Pressure Vessel Standards Committees
Personnel
Summary of Changes
List of Changes in Record Number Order
Cross-Referencing and Stylistic Changes in the Boiler
 and Pressure Vessel Code
Part 1 - General Requirements
Annex 1-B - Definitions
Annex 1-C - Guidance for the Use of U.S. Customary
            and SI Units in the ASME Boiler and
            Pressure Vessel Codes
Part 2 - Responsibilities and Duties
Annex 2-A - Guide for Certifying a User's Design
            Specification
Annex 2-B - Guide for Certifying a Manufacturers
            Design Report
Annex 2-C - Report Forms and Maintenance of
            Records
Annex 2-D - Guide for Preparing Manufacturer's
            Data Reports
Annex 2-E - Quality Control System
Annex 2-F - Contents and Method of Stamping
Annex 2-G - Obtaining and Using Certification
            Mark Stamps
Annex 2-H - Guide to Information Appearing on the
            Certificate of Authorization
Annex 2-I - Establishing Governing Code Editions
            and Cases for Pressure Vessels and Parts
Part 3 - Materials Requirements
Annex 3-A - Allowable Design Stresses
Annex 3-B - Requirements for Material Procurement
Annex 3-C - ISO Material Group Numbers
Annex 3-D - Strength Parameters
Annex 3-E - Physical Properties
Annex 3-F - Design Fatigue Curves
Part 4 - Design by Rule Requirements
Annex 4-A
Annex 4-B - Guide for the Design and Operation of
            Quick-Actuating (Quick-Opening) Closures
Annex 4-C - Basis for Establishing Allowable Loads
            for Tube-to-Tubesheet Joints
Annex 4-D - Guidance to Accommodate Loadings
            Produced by Deflagration
Annex 4-E - Tube Expanding Procedures and Qualification
Part 5 - Design by Analysis Requirements
Annex 5-A - Linearization of Stress Results for Stress
            Classification
Annex 5-B - Histogram Development and Cycle
            Counting for Fatigue Analysis
Annex 5-C - Alternative Plasticity Adjustment
            Factors and Effective Alternating
            Stress for Elastic Fatigue Analysis
Annex 5-D - Stress Indices
Annex 5-E - Design Methods for Perforated Plates
            Based on Elastic Stress Analysis
Annex 5-F - Experimental Stress and Fatigue Analysis
Part 6 - Fabrication Requirements
Annex 6-A - Positive Material Identification Practice
Part 7 - Inspection and Examination Requirements
Annex 7-A - Responsibilities and Duties for
            Inspection and Examination Activities
Part 8 - Pressure Testing Requirements
Part 9 - Pressure Vessel Overpressure Protection
Annex 9-A - Best Practices for the Installation
            and Operation of Pressure Relief Devices

Provides mandatory requirements, specific prohibitions, and Nonmandatory guidance for construction activities and inservice inspection and testing activities.

DocumentType
Standard
Pages
869
PublisherName
American Society of Mechanical Engineers
Status
Superseded
SupersededBy
Supersedes

API 941 : 2016 STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS
API 7NRV : 2006 SPECIFICATION FOR DRILL STRING NON-RETURN VALVES
API 526 RUSSIAN : 2009 FLANGED STEEL PRESSURE RELIEF VALVES
API 6F2 : 1999 TECHNICAL REPORT ON FIRE RESISTANCE IMPROVEMENTS FOR API FLANGES
AWS D14.4/D14.4M : 2012 SPECIFICATION FOR THE DESIGN OF WELDED JOINTS IN MACHINERY AND EQUIPMENT
API 53 : 2012 BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS
API 2SC : 2010 MANUFACTURE OF STRUCTURAL STEEL CASTINGS FOR PRIMARY OFFSHORE APPLICATIONS
PIP VEEVJ001 : 2015 GASKET GUIDELINES
NBR 15827 : 2014 INDUSTRIAL VALVES FOR INSTALLATIONS OF EXPLORATION, PRODUCTION, REFINING AND TRANSPORT OF PETROL PRODUCTS - REQUIREMENTS FOR DESIGN AND PROTOTYPE TEST
AWS D14.5/D14.5M:2009 SPECIFICATION FOR WELDING OF PRESSES AND PRESS COMPONENTS
AWWA D100 : 2011 WELDED CARBON STEEL TANKS FOR WATER STORAGE
API 2510A : 1996 : R2010 FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES
MIL-T-62032 Revision H:1991 TRUCK, TANK, FUEL SERVICING, AND AIRCRAFT FUEL SERVICING, 1,000 - 4,000 GALLON, DIESEL & GASOLINE ENGINE DRIVEN, 16,000 GVW, 4X2, 4X4. 6 X 4 & 6X6 COMMERCIAL
ASME B73.3 : 2015 SPECIFICATION FOR SEALLESS HORIZONTAL END SUCTION CENTRIFUGAL PUMPS FOR CHEMICAL PROCESS
NORSOK L 005:2013 COMPACT FLANGED CONNECTIONS
EN ISO 12212:2012 Petroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers (ISO 12212:2012)
EN ISO 12211:2012 Petroleum, petrochemical and natural gas industries - Spiral plate heat exchangers (ISO 12211:2012)
API TR 17TR7 : 2017 VERIFICATION AND VALIDATION OF SUBSEA CONNECTORS
API 945 : 2003 : R2008 AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS
API TR 938-C : 2015 USE OF DUPLEX STAINLESS STEELS IN THE OIL REFINING INDUSTRY
API 6DSS : 2017-08 SPECIFICATION FOR SUBSEA PIPELINE VALVES
ANS 57.9 : 1992(R2000) DESIGN CRITERIA FOR AN INDEPENDENT SPENT FUEL STORAGE INSTALLATION (DRY TYPE)
API TR 938-B : 2008 USE OF 9CR-1MO-V (GRADE 91) STEEL IN THE OIL REFINING INDUSTRY
NFPA 52 : 2016 VEHICULAR NATURAL GAS FUEL SYSTEMS CODE
API 19G4 : 2011 PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT
API 613:2003 SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
API 677 : 2006 : R2010 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
API 579-1 : 2016 FITNESS-FOR-SERVICE
NORSOK D 007:2013 WELL TESTING SYSTEM
IEEE C37.122.1-2014 REDLINE IEEE Guide for Gas-Insulated Substations Rated Above 52 kV
EEMUA 193 : 2013 MANAGING COMPETENCE ASSURANCE FOR PERSONNEL UNDERTAKING IN-SERVICE INSPECTION OF PRESSURE EQUIPMENT
EEMUA 168 : 2010 GUIDE TO THE PRESSURE TESTING OF IN-SERVICE PRESSURISED EQUIPMENT
EEMUA 223 : 2010 PRESSURE EQUIPMENT TESTING AFTER REPAIR, MODIFICATIONS OR RE-RATING: A GUIDE TO THE PRESSURE TEST WAIVER
MIL-F-80233 Revision B:1985 FURNACES, VACUUM, HEAT TREATING INTEGRAL QUENCH
API 677 :2006 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
MIL-C-52037 Revision F:1990 COMPRESSOR UNIT, RECIPROCATING, POWER DRIVEN, AIR, 15 CFM 3,500 PSI
EN ISO 19902:2007/A1:2013 PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES (ISO 19902:2007/AMD 1:2013)
EN ISO 28921-1:2017 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
MIL-PRF-15618 Revision H:2006 FILTER-SEPARATOR, FLUID, PRESSURE, AVIATION AND DISTILLATE FUEL, NAVAL SHIPBOARD
EEMUA 164 : 1993 SEAL-LESS CENTRIFUGAL PUMPS - CLASS 1
EEMUA 176 : 1998 SPECIFICATION FOR STRUCTURAL CASTINGS FOR USE OFFSHORE
API 662-1 : 2003 PLATE HEAT EXCHANGERS FOR GENERAL REFINERY SERVICES - PART 1: PLATE-AND-FRAME HEAT EXCHANGERS
API 92U : 2008 : R2013 UNDERBALANCED DRILLING OPERATIONS
EN 62256:2017 Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement
NACE SP 02 86 : 2007 ELECTRICAL ISOLATION OF CATHODICALLY PROTECTED PIPELINES
API TR 934-G : 2016 DESIGN, FABRICATION, OPERATIONAL EFFECTS, INSPECTION, ASSESSMENT, AND REPAIR OF COKE DRUMS AND PERIPHERAL COMPONENTS IN DELAYED COKING UNITS
API 611 : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 16R RUSSIAN : 2010 SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS
API 16R : 1997 : R2010 SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS
API 16C CHINESE : 1993 SPECIFICATION FOR CHOKE AND KILL SYSTEMS
API 934-C : 2008 MATERIALS AND FABRICATION OF 1 [1/4]CR-[1/2]MO STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-PRESSURE HYDROGEN SERVICE OPERATING AT OR BELOW 825 DEGREES F (441 DEGREES C)
API 7K CHINESE : 2010 DRILLING AND WELL SERVICING EQUIPMENT
API 582 : 2016 WELDING GUIDELINES FOR THE CHEMICAL, OIL, AND GAS INDUSTRIES
API 17V : 2015 RECOMMENDED PRACTICE FOR ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR SUBSEA APPLICATIONS
API 677 : 2006 : R2016 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
API 622 : 2011 TYPE TESTING OF PROCESS VALVE PACKING FOR FUGITIVE EMISSIONS
NACE RP 02 96 : 2004 GUIDELINES FOR DETECTION, REPAIR, AND MITIGATION OF CRACKING OF EXISTING PETROLEUM REFINERY PRESSURE VESSELS IN WET H[2]S ENVIRONMENTS
API 16AR : 2017 STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT
API 11V1 :1995 SPECIFICATION FOR GAS LIFT EQUIPMENT
API 664 : 2014 SPIRAL PLATE HEAT EXCHANGERS
API 6A : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
API 572 : 2016 INSPECTION PRACTICES FOR PRESSURE VESSELS
EN ISO 13628-4:2010/AC:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT
EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
EN ISO 10423:2009 Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009)
EN ISO 13533:2001/AC:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT
NFPA 560 : 2007 STORAGE, HANDLING, AND USE OF ETHYLENE OXIDE FOR STERILIZATION AND FUMIGATION
NFPA 50A : 1999 GASEOUS HYDROGEN SYSTEMS AT CONSUMER SITES
EN ISO 10432:2004 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004)
NORSOK D 001 : REV 3 COR 2013 DRILLING FACILITIES
API 526 : 2017 FLANGED STEEL PRESSURE-RELIEF VALVES
API 6D :2015 SPECIFICATION FOR PIPELINE AND PIPING VALVES
AWS A5.4 : 92(R2000) STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING, SPECIFICATION FOR
ASHRAE HDBK REFRIGERATION : 2014 ASHRAE HANDBOOK - REFRIGERATION
PIP VESAC001 : 2016 AIR-COOLED HEAT EXCHANGER SPECIFICATION (SUPPLEMENT TO API STD 661, 7TH EDITION)
UNI EN ISO 13704 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES
API 594 : 2017 CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING
PIP VESEH001 : 2016 ELECTRIC IMMERSION PROCESS HEATER SPECIFICATION
API RP 14C : 2017 ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES
MIL STD 1693 : A NOTICE 2 FABRICATION WELDING AND INSPECTION OF HYPERBARIC CHAMBERS AND OTHER CRITICAL LAND BASED STRUCTURES
NACE SP 04 72 : 2015 METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS
API 16A CHINESE : 2004 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
API 11V1 : 1995 : R2008 SPECIFICATION FOR GAS LIFT EQUIPMENT
API 6A REDLINE : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
EEMUA 182 : 2004 SPECIFICATION FOR INTEGRAL BLOCK AND BLEED VALVE MANIFOLDS FOR DIRECT CONNECTION TO PIPEWORK
EN ISO 14723:2009 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009)
EN 13942:2009/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
API 660 : 2015 SHELL-AND-TUBE HEAT EXCHANGERS
API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
ASME PTB 4 : 2013 ASME SECTION 8 - DIVISION 1 EXAMPLE PROBLEM MANUAL
MIL-A-83477 Revision A:1976 AIR CONDITIONER, A/M32C-18 TRAILER MOUNTED, DIESEL ENGINE DRIVEN
EN ISO 21049:2004 Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
API 934-A : 2008 MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE
MIL-PRF-27720 Revision G:2009 TANK, STORAGE, LIQUID OXYGEN/LIQUID NITROGEN, TMU-24/E
EN ISO 25457:2008 Petroleum, petrochemical and natural gas industries - Flare details for general refinery and petrochemical service (ISO 25457:2008)
API RP 2201 : 2003 SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
API 934-E : 2018 RECOMMENDED PRACTICE FOR MATERIALS AND FABRICATION OF 1[1/4]CR-[1/2]MO STEEL PRESSURE VESSELS FOR SERVICE ABOVE 825 DEGREES F (440 DEGREES C)
EN ISO 17781:2017 Petroleum, petrochemical and natural gas industries - Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels (ISO 17781:2017)
API 611 : 2008 : R2014 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 7NRV CHINESE : 2006 SPECIFICATION FOR DRILL STRING NON-RETURN VALVES
EN ISO 27509:2012/AC:2013 PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012/COR 1:2013)
ANS 40.35 : 1991 VOLUME REDUCTION OF LOW-LEVEL RADIOACTIVE WASTE OR MIXED WASTE
API 945:2003 AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS
CSA C22.2 No. 60335-2-40 : 2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
API 537 CHINESE : 2008 FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
API 16R:1997 SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS
EN ISO 10418:2003/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - ANALYSIS, DESIGN, INSTALLATION AND TESTING OF BASIC SURFACE PROCESS SAFETY SYSTEMS
EN ISO 17078-4:2010 Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010)
ASME PTB 2 : 2009 GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY
API 7K : 2015+ERR 2:2016 DRILLING AND WELL SERVICING EQUIPMENT
EN 13942:2009 Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified)
PIP VECV1001 : 2017 DESIGN CRITERIA AND PURCHASING REQUIREMENTS FOR VESSELS ASME CODE SECTION 8, DIVISIONS 1 AND 2
API 653 CHINESE : 2014 TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION
API TR 1PER15K-1 : 2013 PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
ASME FFS 1 : 2007 FITNESS-FOR-SERVICE
API 7NRV : 2006 : R2012 SPECIFICATION FOR DRILL STRING NON-RETURN VALVES
EEMUA 184 : 2009 GUIDE TO THE ISOLATION OF PRESSURE RELIEVING DEVICES
EEMUA 211 : 2016 GUIDANCE ON THE SPECIFICATION OF PRESSURE VESSELS
API 14A : 2015 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
API 576 CHINESE : 2009 INSPECTION OF PRESSURE-RELIEVING DEVICES
EN ISO 15547-1:2005 Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 1: Plate-and-frame heat exchangers (ISO 15547-1:2005)
API 7K : 2015 DRILLING AND WELL SERVICING EQUIPMENT
API 653 : 2014 TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION
NFPA 99 : 2018 HEALTH CARE FACILITIES CODE
API 92U : 2008 : INC : ADD 1 : 2015 : R201300 UNDERBALANCED DRILLING OPERATIONS
API 510 CHINESE : 2014 PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION
API 570 CHINESE : 2009 PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS
API 92M : 2017 MANAGED PRESSURE DRILLING OPERATIONS WITH SURFACE BACK-PRESSURE
API PUBL 2510A : 1996 FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES
API TR 17TR12 : 2015 CONSIDERATION OF EXTERNAL PRESSURE IN THE DESIGN AND PRESSURE RATING OF SUBSEA EQUIPMENT
API 663 : 2014 HAIRPIN-TYPE HEAT EXCHANGERS
NFPA 50B : 1999 LIQUEFIED HYDROGEN SYSTEMS AT CONSUMER SITES
EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
NACE 8X194 : 2006 MATERIALS AND FABRICATION PRACTICES FOR NEW PRESSURE VESSELS USED IN WET H[2]S REFINERY SERVICE
EN ISO 13625:2002 Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002)
CSA B625 : 2013 PORTABLE TANKS FOR THE TRANSPORT OF DANGEROUS GOODS
API TR 17TR4 : 2016 SUBSEA EQUIPMENT PRESSURE RATINGS
API 6DSS CHINESE : 2009 SPECIFICATION FOR SUBSEA PIPELINE VALVES
API 92U : 2008 UNDERBALANCED DRILLING OPERATIONS
API 2201 : 2003 : R2010 SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
API 546 : 2008 BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
API 16A : 2017 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
API TR 934-B : 2011 FABRICATION CONSIDERATIONS FOR VANADIUM-MODIFIED CR-MO STEEL HEAVY WALL PRESSURE VESSELS
API SPEC 16RCD : 2015 SPECIFICATION FOR ROTATING CONTROL DEVICES
UFC 3-280-04 : 2003 UNIFIED FACILITIES CRITERIA - ARMY FILTRATION OF LIQUIDS
API 6AR : 1994 RECOMMENDED PRACTICE FOR REPAIR AND REMANUFACTURE OF WELLHEAD AND CHRISTMAS TREE EQUIPMENT
EN ISO 13704:2007/AC:2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES
API 6X : 2014 DESIGN CALCULATIONS FOR PRESSURE-CONTAINING EQUIPMENT
API 571 : 2011 DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY
MIL C 00555 : K COMPRESSORS, AIR, RECIPROCATING AND ROTARY, DIESEL ENGINE DRIVEN
API 560 : 2016 FIRED HEATERS FOR GENERAL REFINERY SERVICE
API 530 : 2015 CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES
EEMUA 188 : 2009 GUIDE FOR ESTABLISHING OPERATING PERIODS OF SAFETY VALVES
EEMUA 154 : 2002 DEMOLITION OF VERTICAL CYLINDRICAL STEEL STORAGE TANKS AND LPG SPHERES
API 6DX : 2012 ACTUATOR SIZING AND MOUNTING KITS FOR PIPELINE VALVES
API 2510A : 1996 : R2015 FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES
UNI EN 13942 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
API SPEC 11D1 : 2015 PACKERS AND BRIDGE PLUGS
API SPEC 16C : 2015 CHOKE AND KILL EQUIPMENT
API 64 : 2017-08 DIVERTER EQUIPMENT SYSTEMS
I.S. EN ISO 25457:2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
BS ISO 12490:2011 Petroleum and natural gas industries. Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
CSA B51 : 2014 BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
ISO 20421-1:2006 Cryogenic vessels Large transportable vacuum-insulated vessels Part 1: Design, fabrication, inspection and testing
B620-14 (R2019) Highway tanks and TC portable tanks for the transportation of dangerous goods
ASTM F 682 : 1982 : REV A : R2004 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
ASTM F 1201 : 1988 : R2010 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0&#176F
ASTM F 1201 : 1988 : R2004 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0&#176F
ASTM F 1200 : 1988 : R2004 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150&#176F)
BS EN ISO 25457:2008 Petroleum, petrochemical and natural gas industries. Flare details for general refinery and petrochemical service
CSA N285.7 : 2015 Periodic inspection of CANDU nuclear power plant balance of plant systems and components<br>
EN ISO 23251:2007/A1:2008 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS
ASTM A 312/A312M : 2017-03 SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
ISO 12490:2011 Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
BS ISO 20421-1:2006 Cryogenic vessels. Large transportable vacuum-insulated vessels Design, fabrication, inspection and testing
ISO 18139:2017 Ships and marine technology — Globe valves for use in low temperature applications — Design and testing requirements
BS EN ISO 12211:2012 Petroleum, petrochemical and natural gas industries. Spiral plate heat exchangers
ASTM A 381 : 1996 : R2001 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
BS EN ISO 17781:2017 Petroleum, petrochemical and natural gas industries. Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels
CAN/CSA-C22.2 NO. 60335-2-34:17 Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors (Binational standard with UL 60335-2-34)
ISO 27509:2012 Petroleum and natural gas industries Compact flanged connections with IX seal ring
ASTM E 1344 : 1990 : R2006 Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities (Withdrawn 2009)
ASTM A 1005/A1005M : 2000 : EDT 1 Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded
BS EN ISO 23251 : 2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS
ASTM A 1005/A1005M : 2000 : R2004 Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded
ASTM B 546 : 2004 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
ASME PV CODE 7 : 2017 BPVC Section VII-BOILER AND PRESSURE VESSEL CODE - RECOMMENDED GUIDELINES FOR THE CARE OF POWER BOILERS
BS PD5500(2006) : 2006 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
BS EN ISO 13709:2003 Centrifugal pumps for petroleum, petrochemical and natural gas industries
BS EN ISO 14224:2016 Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
BS ISO 20421-1:2019 Cryogenic vessels. Large transportable vacuum-insulated vessels Design, fabrication, inspection and testing
BS EN ISO 13625:2002 Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings
ASTM E 1117 : 1997 : R2006 Standard Practice for Design of Fuel-Alcohol Manufacturing Facilities (Withdrawn 2009)
ISO 14313:2007 Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
ASTM F 1201 : 1988 : R2016 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
ISO 10631:2013 Metallic butterfly valves for general purposes
ISO 21049:2004 Pumps Shaft sealing systems for centrifugal and rotary pumps
BS EN 62256:2017 Hydraulic turbines, storage pumps and pump-turbines. Rehabilitation and performance improvement
BS EN ISO 12212:2012 Petroleum, petrochemical and natural gas industries. Hairpin-type heat exchangers
ASTM E 1117 : 1997 Standard Practice for Design of Fuel-Alcohol Manufacturing Facilities
ASTM A 358/A358M : 2015 : REDLINE Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
ASTM A 1005/A1005M : 2000 : R2010 Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded (Withdrawn 2014)
ASTM F 682 : 1982 : REV A : R2014 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
BS 1113:1989 Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers)
API RP 17R : 2015 RECOMMENDED PRACTICE FOR FLOWLINE CONNECTORS AND JUMPERS
BS EN ISO 10423:2009 Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM
ASTM F 1200 : 1988 : R1998 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150&#176F)
BS EN ISO 15547-1:2005 Petroleum, petrochemical and natural gas industries. Plate-type heat exchangers Plate-and-frame heat exchangers
ASTM E 1344 : 1990 : R1997 : EDT 1 Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities
ISO 21009-1:2008 Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests
ISO 14224:2016 Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment
ISO 13533:2001 Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment
BS EN ISO 14723:2009 Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves
ISO 28921-1:2013 Industrial valves Isolating valves for low-temperature applications Part 1: Design, manufacturing and production testing
ISO 19902:2007 Petroleum and natural gas industries Fixed steel offshore structures
ASTM E 2956 : 2014 Standard Guide for Monitoring the Neutron Exposure of LWR Reactor Pressure Vessels
ASTM B 546 : 2004 : R2014 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ASTM C 1062 : 2000 : R2014 Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
ASTM E 1068 : 1985 : R2009 Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid (Withdrawn 2018)
B622-14 (R2019) Selection and use of highway tanks, TC portable tanks, and ton containers for the transportation of dangerous goods, Class 2
CAN/CSA-Z662-15 Oil and gas pipeline systems
BS ISO 19240:2017 Industrial valves. Lined metal quarter turn and check valves for chemical process and related industries
ASTM A 381 : 1996 : R2005 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
BS ISO 18139:2017 Ships and marine technology. Globe valves for use in low temperature applications. Design and testing requirements
ASTM E 1068 : 1985 : R2003 Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid
I.S. EN ISO 13704:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES
ASTM B 546 : 2004 : R2009 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ISO 13625:2002 Petroleum and natural gas industries — Drilling and production equipment — Marine drilling riser couplings
KTA 3101.3 : 2015(R2017) DESIGN OF REACTOR CORES OF PRESSURIZED WATER AND BOILING WATER REACTORS - PART 3: MECHANICAL AND THERMAL DESIGN
BS 1608:1990 Specification for electrically driven refrigerant condensing units
BS ISO 10631:2013 Metallic butterfly valves for general purposes
ISO 12211:2012 Petroleum, petrochemical and natural gas industries — Spiral plate heat exchangers
ASTM F 682 : 1982 : REV A : R2008 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
BS EN ISO 27509:2012 Petroleum and natural gas industries. Compact flanged connections with IX seal ring
ISO 23251:2006 Petroleum, petrochemical and natural gas industries Pressure-relieving and depressuring systems
ASTM F 1200 : 1988 : R2010 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150&#176F)
BS EN ISO 13533:2002 Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment
ASTM F 1200 : 1988 : R2016 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)
ASTM B 363 : 2014 : REDLINE Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
ISO 14723:2009 Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves
ISO 17078-4:2010 Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment
ASTM A 381 : 1996 : R2012 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
BS EN ISO 13704:2007 Petroleum, petrochemical and natural gas industries. Calculation of heater-tube thickness in petroleum refineries
DIN 2413:2011-06 SEAMLESS STEEL TUBES FOR OIL- AND WATER-HYDRAULIC SYSTEMS - CALCULATION RULES FOR PIPES AND ELBOWS FOR DYNAMIC LOADS
API 510 : 2014 PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION
BS PD5500(2015) : 2015 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
ISO 10418:2003 Petroleum and natural gas industries Offshore production installations Analysis, design, installation and testing of basic surface process safety systems
ASME PCC 2 : 2015 REPAIR OF PRESSURE EQUIPMENT AND PIPING
ASTM B 361 : 2016 : REDLINE Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
I.S. EN ISO 28921-1:2017 INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013)
BS EN 13942:2009 Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves
API SPEC 16F : 2017 SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT
ISO 10423:2009 Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment
ISO 10432:2004 Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment
ASTM A 381 : 1996 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
ISO 13704:2007 Petroleum, petrochemical and natural gas industries — Calculation of heater-tube thickness in petroleum refineries
BS EN ISO 21049:2004 Pumps. Shaft sealing systems for centrifugal and rotary pumps
BS EN ISO 10418:2003 Petroleum and natural gas industries. Offshore production Installations. Analysis, design, installation and testing of basic surface process safety systems
BS EN ISO 28921-1:2017 Industrial valves. Isolating valves for low-temperature applications Design, manufacturing and production testing
BS 8010-2.8:1992 Code of practice for pipelines. Pipelines on land: design, construction and installation Steel for oil and gas
PD 5500:2003 Specification for unfired fusion welded pressure vessels
Z276-18 Liquefied natural gas (LNG) - Production, storage, and handling
ASTM E 1068 : 1985 : R1996 : EDT 1 Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid
ASTM F 682 : 1982 : REV A : R1998 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
NACE RP 04 72 : 2005 METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS
NASA STD 8719.24 : 2011 NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS
ISO 12212:2012 Petroleum, petrochemical and natural gas industries — Hairpin-type heat exchangers
ISO 19240:2017 Industrial valves — Lined metal quarter turn and check valves for chemical process and related industries
BS EN ISO 10432:2004 Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
DIN EN ISO 28921-1:2017-05 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
BS ISO 21009-1:2008 Cryogenic vessels — Static vacuum-insulated vessels Part 1: Design, fabrication, inspection and tests
ASTM F 1201 : 1988 : R1998 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0&#176F
ISO 15547-1:2005 Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 1: Plate-and-frame heat exchangers
BS ISO 13704:2001 Petroleum and natural gas industries. Calculation of heater-tube thickness in petroleum refineries
NEMA SG 4:2009(R2013) ALTERNATING CURRENT HIGH-VOLTAGE CIRCUIT BREAKERS
ASTM C 1062 : 2000 : R2008 Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
BS EN ISO 13628-4:1999 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment
ASTM C 1062 : 2000 Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
ISO 25457:2008 Petroleum, petrochemical and natural gas industries — Flare details for general refinery and petrochemical service
PIP VESV1002 : 2012 DESIGN AND FABRICATION SPECIFICATION FOR VESSELS ASME CODE SECTION 8, DIVISIONS 1 AND 2
ISO 13628-4:2010 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment
BS EN ISO 17078-4:2010 Petroleum and natural gas industries. Drilling and production equipment Practices for side-pocket mandrels and related equipment CD-ROM
ASME B16.47 : 2017 LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD
API 6A CHINESE : 2011 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
API 653 REDLINE : 2009 TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION
API 537 REDLINE : 2008 FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
API 14D : 1994 SPECIFICATION FOR WELLHEAD SURFACE SAFETY VALVES AND UNDERWATER SAFETY VALVES FOR OFFSHORE SERVICE
API 6DSS REDLINE : 2009 SPECIFICATION FOR SUBSEA PIPELINE VALVES
IEEE C37.016-2006 IEEE Standard for AC High Voltage Circuit Switchers rated 15.5kV through 245kV
ASME STP-PT-025 : 0 EXTENDED FATIGUE EXEMPTION RULES FOR LOW CR ALLOYS INTO THE TIME-DEPENDENT RANGE FOR SECTION 8 DIVISION 2 CONSTRUCTION
API 7K REDLINE : 2010 DRILLING AND WELL SERVICING EQUIPMENT
API TR 938-C REDLINE : 2011 USE OF DUPLEX STAINLESS STEELS IN THE OIL REFINING INDUSTRY
API 576 REDLINE : 2009 INSPECTION OF PRESSURE-RELIEVING DEVICES
API 2T REDLINE : 2010 PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS
PIP RESE001 : 2017 GENERAL PURPOSE SKID-MOUNTED PACKAGED EQUIPMENT SPECIFICATION
ASME STP-PT-005 : 2006 DESIGN FACTOR GUIDELINES FOR HIGH-PRESSURE COMPOSITE HYDROGEN TANKS
API 570 REDLINE : 2009 PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS
API RP 2T : 2010 PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS
API 6H : 1998 : R2011 SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS
API 16RCD RUSSIAN : 2005 SPECIFICATION FOR DRILL THROUGH EQUIPMENT - ROTATING CONTROL DEVICES
API 941 REDLINE : 2008 STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS
NBR 16381 : 2015 ONSHORE AND OFFSHORE PIPELINES - SCRAPER-TRAP
12/30262118 DC BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
API 17D REDLINE : 2011 DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT
API 6H CHINESE : 1998 SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS
API 571 REDLINE : 2011 DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY
API 526 REDLINE : 2009 FLANGED STEEL PRESSURE-RELIEF VALVES
ASME PTC19.3 : 1974(R2004) PERFORMANCE TEST CODE - PART 3: TEMPERATURE MEASUREMENT
ASME PTB 3 : 2013 ASME SECTION 8 - DIVISION 2 EXAMPLE PROBLEM MANUAL
ASME B31.12 : 2014 HYDROGEN PIPING AND PIPELINES
API 6H : 1998 SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS
ASME PTC19.3 TW : 2016 THERMOWELLS
API 2T : 2010 : R2015 PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS
API 530 REDLINE : 2008 CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES
API 611 REDLINE : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ASME STP-PT-070 : 2014 Design Guidelines for the Effects of Creep, Fatigue & Creep-Fatigue Interaction with Design-By-Analysis and Nondestructive Inspection Acceptance Criteria (STP-PT-070 - 2014)
API 16C RUSSIAN : 1993 SPECIFICATION FOR CHOKE AND KILL SYSTEMS
API 14A RUSSIAN : 2001 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT

ASTM E 446 : 2015 : REDLINE Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
ASTM E 186 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings
ASTM E 127 : 2015 : REDLINE Standard Practice for Fabrication and Control of Aluminum Alloy Ultrasonic Standard Reference Blocks
ASME PTC25 : 2014 PRESSURE RELIEF DEVICES
ISO 148-2:2016 Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
ASME PCC 1 : 2013 GUIDELINES FOR PRESSURE BOUNDARY BOLTED FLANGE JOINT ASSEMBLY
ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
ASME PCC 2 : 2015 REPAIR OF PRESSURE EQUIPMENT AND PIPING
AWS A4.2M : 2006 STANDARD PROCEDURES FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE DELTA FERRITE CONTENT OF AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC STAINLESS STEEL WELD METAL
ASME B16.20 : 2012 METALLIC GASKETS FOR PIPE FLANGES
ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
ASME FFS 1 : 2007 FITNESS-FOR-SERVICE
ASME CA 1 : 2014 CONFORMITY ASSESSMENT REQUIREMENTS
ASME QAI 1 : 2010 QUALIFICATIONS FOR AUTHORIZED INSPECTION
API 943 : LATEST HIGH TEMPERATURE CRUDE OIL CORROSIVITY STUDIES
ISO 148-3:2016 Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ASTM E 125 : 1963 : R2003 Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ASTM E 272 : 2015 : REDLINE Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings
ASTM E 280 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings
ASME B18.2.2 : 2015 NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES)
ASME B16.9 : 2012 FACTORY-MADE WROUGHT BUTTWELDING FITTINGS
API 572 : 2016 INSPECTION PRACTICES FOR PRESSURE VESSELS
ASME B16.47 : 2017 LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD

View more information
US$845.25
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.