• There are no items in your cart

ASTM A 1058 : 2019

Current
Current

The latest, up-to-date edition.

Standard Test Methods for Mechanical Testing of Steel Products—Metric
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

11-27-2019

These test methods cover mechanical tests described in ASTM, EN,2 ISO,3 and JIS4 standards that utilize the SI system of units.

1.1These test methods cover mechanical tests described in ASTM, EN,2 ISO,3 and JIS4 standards that utilize the SI system of units. The test methods in each system are not exact equivalents. Each standards system (ASTM, EN, ISO, and JIS) shall be used independently of the other. Combining requirements from any two or more systems may result in nonconformance with the purchase order.

1.2These test methods cover procedures for the mechanical testing of steels, stainless steels, and related alloys. The various mechanical tests herein described are used to determine properties required in the product specifications. Variations in testing methods are to be avoided, and standard methods of testing are to be followed to obtain reproducible and comparable results. In those cases in which the testing requirements for certain products are unique or at variance with these general procedures, the product specification testing requirements shall control.

1.3Only one of the testing procedure tracks shall be followed: ASTM, EN, ISO, or JIS. When a test method or practice is not available in one of the tracks then an appropriate test method or practice from an alternative track shall be used. The respective tests are listed in the column shown in Table 1.

Note 1:The test methods in each system are not exact equivalents.

1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5Attention is directed to Practice ISO 17025 when there may be a need for information on criteria for evaluation of testing laboratories.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
A 01
DocumentType
Test Method
Pages
12
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM A 788/A788M : 2022 : REV A Standard Specification for Steel Forgings, General Requirements
ASTM A 511/A511M : 2021 : REV A Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
ASTM A 473 : 2021 Standard Specification for Stainless Steel Forgings
ASTM A 370 : 2022 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A 276/A276M : 2017 Standard Specification for Stainless Steel Bars and Shapes
ASTM A 530/A530M : 2018 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
ASTM A 847/A847M : 2021 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
ASTM A 961/A961M : 2021 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
ASTM A 999/A999M : 2018 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
ASTM A 957/A957M : 2021 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
ASTM A 1090/A1090M : 2019 Standard Specification for Forged Rings and Hollows for Use as Base Plates in Power Transmission Structures
ASTM A 703/A703M : 2020 : REV A Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
ASTM A 450/A450M : 2021 Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
ASTM A 1100 : 2016 : R2022 Standard Guide for Qualification and Control of Induction Heat Treating
ASTM A 994 : 2018 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
ASTM A 960/A960M : 2020 Standard Specification for Common Requirements for Wrought Steel Piping Fittings
ASTM A 420/A420M : 2020 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
ASTM A 965/A965M : 2021 : REV A Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
ASTM A 1099/A1099M : 2020 Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels
ASTM A 781/A781M : 2021 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
ASTM F 3122 : 2014 : R2022 Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes
ASTM A 985/A985M : 2021 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
ASTM A 1016/A1016M : 2018 : REV A Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
ASTM A 381/A381M : 2018 Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems
ASTM A 1112/A1112M : 2018 Standard Specification for Cold-Formed Welded High Strength Carbon Steel or High-Strength Low-Alloy Steel Hollow Structural Sections (HSS) in Rounds and Shapes
ASTM A 134/A134M : 2019 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
ASTM A 962/A962M : 2022 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
ASTM A 519/A519M : 2017 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
ASTM A 1110/A1110M : 2021 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes with 52 KSI [360 MPa] Minimum Yield Strength and Impact Requirements
ASTM A 266/A266M : 2021 Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

ASTM E 8/E8M : 2024 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 8/E8M : 2016 : REV A : EDT 1 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E 8/E8M : 2021 Standard Test Methods for Tension Testing of Metallic Materials
ASTM A 956/A956M : 2022 Standard Test Method for Leeb Hardness Testing of Steel Products
ASTM E 18 : 2022 Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E 110 : 2014 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
ASTM A 956/A956M : 2017 : REV A Standard Test Method for Leeb Hardness Testing of Steel Products
ASTM E 10 : 2023 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E 23 : 2022 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E 10 : 2001 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E 18 : 2020 Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E 190 : 2014 Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM E 23 : 2023 : REV A Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E 8/E8M : 2022 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 190 : 2021 Standard Test Method for Guided Bend Test for Ductility of Welds
ASTM E 110 : 2014 : R2023 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
ASTM E 23 : 2018 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E 23 : 2002 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E 23 : 2023 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM A 833 : 1984 : R1996 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM E 18 : 2019 Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E 290 : 2022 Standard Test Methods for Bend Testing of Material for Ductility
ASTM E 10 : 2018 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E 290 : 2014 Standard Test Methods for Bend Testing of Material for Ductility
ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

View more information
US$69.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.