• There are no items in your cart

ASTM A 395/A395M : 1999 : R2018

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
Available format(s)

Hardcopy , PDF

Superseded date

10-18-2022

Language(s)

English

Published date

11-08-2018

CONTAINED IN VOL. 01.02, 2017 Describes ductile iron castings for pressure retaining parts for use at elevated temperatures.

1.1This specification covers ductile iron castings for pressure-retaining parts for use at elevated temperatures. Castings of all grades are suitable for use up to 450 °F. For temperatures above 450 °F and up to 650 °F, only Grade 60-40-18 castings are suitable (Note 1).

1.2Valves, flanges, pipe fittings, pumps, and other piping components are generally manufactured in advance and supplied from stock by the manufacturer, jobber, or dealer.

1.3For supplemental casting requirements, Specification A834 may be utilized.

1.4The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

Note 1:For service other than as specified in this section, reference should be made to Specification A536 for Ductile Iron Castings.2

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
A 04
DevelopmentNote
Supersedes ASTM A 395 and ASTM A 395M. (04/2002)
DocumentType
Standard
Pages
8
ProductNote
Reconfirmed 1999
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM F 1298 : 1990 : R2018 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
ASTM F 2798 : 2009 : R2018 Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
ASTM A 1095 : 2015 : R2019 Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings
ASTM F 1123 : 1987 : R2019 Standard Specification for Non-Metallic Expansion Joints
ASTM A 834 : 1995 : R2020 Standard Specification for Common Requirements for Iron Castings for General Industrial Use
ASTM F 1155 : 2010 : R2019 Standard Practice for Selection and Application of Piping System Materials
ASTM F 1510 : 2021 Standard Specification for Rotary Positive Displacement Pumps, Ships Use
ASTM F 3386/F3386M : 2021 Standard Specification for Detonation Flame Arresters
ASTM F 1545 : 2015 : REV A : R2021 Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges

ASTM A 370 : 2021 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E 689 : 2015 : REDLINE Standard Reference Radiographs for Ductile Iron Castings
ASTM E 8/E8M : 2016 : REV A : EDT 1 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 446 : 2015 : REDLINE Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
ASTM E 186 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings
ASTM E 8/E8M : 2021 Standard Test Methods for Tension Testing of Metallic Materials
ASTM F 1476 : 2001 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM E 10 : 2001 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM F 1548 : 2001 : R2018 Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ASTM F 1476 : 2007 : R2019 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM E 10 : 2017-05 TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS
ASTM E 1806 : 1996 : R2006 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM E 280 : 2015 : R2019 : EDT 1 Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings
ASTM A 370 : 2020 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E 8/E8M : 2022 Standard Test Methods for Tension Testing of Metallic Materials
ASTM F 1548 : 2001 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ASTM F 1476 : 1995 : REV A Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM E 1806 : 2009 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM E 1806 : 2009 : R2016 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
MSS SP 25 : 2013 STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS
ASTM A 370 : 2011 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A 732/A732M : 1998 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
ASTM E 280 : 2021 Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings
ASTM A 834 : 1995 Standard Specification for Common Requirements for Iron Castings for General Industrial Use
ASTM E 280 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings
ASTM E 1806 : 2018 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM F 1476 : 2007 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM E 1806 : 1996 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM F 1548 : 2001 : R2006 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ASTM F 1548 : 1994 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ASTM F 1476 : 2007 : R2013 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM E 1806 : 1996 : R2001 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM A 732/A732M : 2014 : REDLINE Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
ASTM F 1476 : 2001 : R2006 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM F 1548 : 2001 : R2012 Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.