ASTM B 193 : 2016 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Test Method for Resistivity of Electrical Conductor Materials
Available format(s)
PDF
Superseded date
05-05-2020
Language(s)
English
Published date
04-01-2016
CONTAINED IN VOL. 02.03, 2017 Describes the determination of the electrical resistivity of metallic electrical conductor material.
1.1This test method covers the determination of the electrical resistivity of metallic electrical conductor material. It provides for an accuracy of ±0.30 % on test specimens having a resistance of 0.00001 Ω (10 μΩ) or more. Weight resistivity accuracy may be adversely affected by possible inaccuracies in the assumed density of the conductor.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
B 01
|
| DocumentType |
Redline
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
| ASTM F 2249 : 2003 : R2009 | Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment |
| ASTM B 520 : 2012 | Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic<brk/> Application |
| ASTM B 286 : 2007 | Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment |
| ASTM B 524/B524M : 2018 : REDLINE | Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201) |
| ASTM B 236 : 2007 : R2015 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) |
| ASTM B 317/B317M : 2007 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| GR 1398 CORE : ISSUE 1 REV 1 | GENERIC REQUIREMENTS FOR COAXIAL DROP CABLE |
| ASTM B 531 : 1990 : R1998 : EDT 1 | Standard Specification for Aluminum-Alloy 5005 Drawing Stock for Electrical Purposes (Withdrawn 2003) |
| ASTM D 1676 : 2017 : REDLINE | Standard Test Methods for Film-Insulated Magnet Wire |
| ASTM B 786/B786M : 2008 : R2013 : EDT 1 | Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation |
| J-W-1177 Revision B:1988 | WIRE, MAGNET, ELECTRICAL, GENERAL SPECIFICATION |
| ASTM B 415 : 2016 : REDLINE | Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire |
| MIL-DTL-49514 Revision A:2016 | COPPER CRUSHER SPHERES FOR CANNON AND MORTAR PRESSURE GAUGES, GENERAL SPECIFICATION FOR |
| ASTM B 170 : 1999 : R2015 | Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
| ASTM B 958 : 2008 | Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc<span class='unicode'>–</span>5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
| MIL-STD-2142 Revision A:1990 | MAGNETIC SILENCING CHARACTERISTICS, MEASUREMENT OF (METRIC) |
| ASTM B 965 : 2009 | Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability |
| ASTM B 973 : 2010 : R2014 | Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application |
| SAE AS 81021 : 2016 | COPPER-BERYLLIUM ALLOY (COPPER ALLOY NUMBERS C17500 AND C17510), STRIP |
| ASTM B 33 : 2010 : R2014 | Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes |
| ASTM B 47 : 1995 : REV A : R2001 | Standard Specification for Copper Trolley Wire |
| ASTM B 786 : 2008 : R2013 | Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation |
| ASTM B 341/B341M : 2002 | Standard Specification for Aluminum-Coated (Aluminized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ) (Withdrawn 2007) |
| ASTM B 736 : 2000 : R2006 | Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock (Withdrawn 2015) |
| ASTM B 802/B802M : 2010 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) |
| IEEE 1242-1999 | IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
| ASTM B 961 : 2013 : REDLINE | Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application |
| ASTM B 152/B152M : 2013 : REDLINE | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
| ASTM D 4566 : 2014 : REDLINE | Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable |
| ASTM B 502/B502M : 2010 : EDT 1 | Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors |
| ASTM B 802/B802M : 2010 : R2016 | Standard Specification for Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) |
| ASTM B 63 : 2007 : R2013 | Standard Test Method for Resistivity of Metallically Conducting Resistance and<brk/> Contact Materials |
| ASTM B 379 : 2011-05 | SPECIFICATION FOR PHOSPHORIZED COPPERS - REFINERY SHAPES |
| ASTM B 498/B498M : 2008 | Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors |
| ASTM B 869 : 2007 : R2013 | Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire |
| ASTM B 501 : 2010 | Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application |
| ASTM B 398/B398M : 2015 : REDLINE | Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes |
| ASTM F 3273 : 2017 | Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700) |
| ASTM B 233 : 1997 : R2012 | Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes |
| ASTM B 317/B317M : 2007 : R2015 : EDT 1 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| ASTM B 786 : 2008 | Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation |
| ASTM B 566 : 2004 : REV A : R2016 | Standard Specification for Copper-Clad Aluminum Wire |
| ASTM B 372 : 2017 : REDLINE | Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube |
| ASTM B 298 : 2012 : R2017 | Standard Specification for Silver-Coated Soft or Annealed Copper Wire |
| ASTM B 609/B609M : 2012 : R2016 | Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
| ASTM B 566 : 2004 : REV A : R2011 | Standard Specification for Copper-Clad Aluminum Wire |
| ASTM A 111 : 1999 : REV A : R2009 | Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire |
| ASTM B 606/B606M : 2008 : EDT 1 | Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced |
| ASTM B 230/B230M : 2007 : R2012 | Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes |
| ASTM B 116 : 1995 | Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage |
| ASTM B 901 : 2004 : R2011 | Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction |
| ASTM E 1004 : 2017 : REDLINE | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
| ASTM B 869 : 2007 | Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire |
| ASTM B 910/B910M : 2007 : R2018 | Standard Specification for Annealed Copper-Clad Steel Wire |
| ASTM B 401 : 2012 : R2016 | Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP) |
| ASTM B 317/B317M : 2007 : R2015 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| IPC AJ 820 : A | ASSEMBLY AND JOINING HANDBOOK |
| MIL-DTL-24643 Revision C:2009 | Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
| MIL-DTL-24640 Revision C:2011 | CABLES, LIGHTWEIGHT, LOW SMOKE, ELECTRIC, FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
| SAE AMS 4602 : 2003 | COPPER BARS, RODS, AND SHAPES OXYGEN-FREE, HARD TEMPER (HO4) (COMPOSITION SIMILAR TO UNS C10200) |
| ASTM B 47 : 1995 : REV A : R2017 | Standard Specification for Copper Trolley Wire |
| ASTM B 971 : 2010 | Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application |
| ASTM B 566 : 2004 | Standard Specification for Copper-Clad Aluminum Wire |
| ASTM B 170 : 1999 : R2004 | Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
| ASTM B 800 : 2005 : R2015 | Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers |
| MIL C 915 : F | CABLE AND CORD ELECTRICAL, FOR SHIPBOARD USE GENERAL SPECIFICATIONS FOR |
| ASTM B 972 : 2010 : R2014 | Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application |
| ASTM B 48 : 2000 : R2011 | Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors |
| ASTM B 48 : 2000 : R2005 : EDT 1 | Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors |
| ASTM B 298 : 2012 | Standard Specification for Silver-Coated Soft or Annealed Copper Wire |
| ASTM B 1001 : 2017 | Standard Specification for Copper Electrode Wire Used for Welding Seams of Steel Cans |
| ASTM B 412 : 1995 | Standard Specification for Copper-Nickel-Silicon Alloy Wire (Withdrawn 2000) |
| ASTM B 736 : 2000 | Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock |
| ASTM B 937 : 2018 : REDLINE | Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510) |
| ASTM B 592 : 2015 : REDLINE | Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 170 :1999 | Standard Specification for Oxygen-Free Electrolytic Copper Refinery Shapes |
| ASTM F 468M : 2006 : R2012 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric) |
| ASTM B 800 : 2005 : R2011 | Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes<char: emdash>Annealed and Intermediate Tempers |
| ASTM B 800 : 2005 | Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers |
| ASTM B 47 : 1995 : REV A : R2007 | Standard Specification for Copper Trolley Wire |
| MIL-C-81790 Revision A:1990 | CONNECTORS, RECEPTACLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| ASTM B 441 : 2016 : REDLINE | Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465) |
| SCTE 177 : 2012 | SPECIFICATION FOR BRAIDED 75 OHMS, MINI-SERIES QUAD SHIELD COAXIAL CABLE FOR CMTS AND SDI CABLES |
| ASTM B 786/B786M : 2008 : R2018 | Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation |
| ASTM B 502/B502M : 2010 : EDT 2 | Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors |
| GR 2949 CORE : ISSUE 1 | GENERIC REQUIREMENTS FOR BURIED HYBRID COAXIAL/TWISTED PAIR CABLE |
| ASTM B 33 : 2010 | Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes |
| SAE AMS 4700 : 2009 | COPPER WIRE, BARE, HIGH PURITY |
| ASTM B 236M : 2007 : R2015 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric) (Withdrawn 2024) |
| ASTM B 301/B301M : 2013 : REDLINE | Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes |
| SAE AMS 4501F : 2000(S2017) | COPPER SHEET, STRIP, AND PLATE, OXYGEN-FREE, LIGHT COLD ROLLED |
| ASTM F 468M:2006 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric] |
| CSA C22.2 No. 130 : 2016 | REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING AND HEATING DEVICE SETS |
| ASTM B 324 : 2001 : R2007 | Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes |
| ASTM B 706 : 2000 : R2011 | Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube |
| ASTM B 75M : 1999 : R2005 | Standard Specification for Seamless Copper Tube [Metric] |
| ASTM B 230/B230M : 2007 : R2016 | Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes |
| ASTM B 47 : 1995 : REV A | Standard Specification for Copper Trolley Wire |
| ASTM B 743 : 2012 : REDLINE | Standard Specification for Seamless Copper Tube in Coils |
| ASTM B 8 : 2011 : R2017 | Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft |
| ASTM B 965 : 2009 : R2014 | Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability |
| ASTM D 3353 : 2018 : REDLINE | Standard Test Methods for Fibrous-Insulated Magnet Wire |
| ASTM B 189 : 2005 : R2015 | Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes |
| ASTM F 1883 : 2003 : R2008 | Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units |
| ASTM B 606/B606M : 2008 : R2016 | Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced |
| ASTM B 1005 : 2017 | Standard Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar) |
| ASTM B 401 : 2012 | Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP) |
| ASTM B 236 : 2007 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) |
| ASTM B 5 : 2016 : REDLINE | Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes |
| ASTM F 68 : 2016 : REDLINE | Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices |
| ASTM B 236M : 2007 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric] |
| NEMA WC 55 : 1992(R1999) | INSTRUMENTATION CABLES AND THERMOCOUPLE WIRE |
| ASTM B 116 : 1995 : R2017 | Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolley Wire for Industrial Haulage |
| ASTM B 824 : 2017 : REDLINE | Standard Specification for General Requirements for Copper Alloy Castings |
| ASTM B 48:2000 | Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors |
| ASTM B 609M : 1997 | Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes [Metric] (Withdrawn 1999) |
| MIL-STD-1537 Revision C:2002 | Electrical Conductivity Test for Verification of Heat Treatment of Aluminum Alloys, Eddy Current Method |
| ASTM B 957 : 2008 | Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors |
| ASTM B 174 : 2017 : REDLINE | Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors |
| SCTE 71 : 2008 | SPECIFICATION FOR BRAIDED, 75 OHM, COAXIAL, MULTI-PURPOSE CABLE |
| ASTM B 520 : 2012 : R2017 | Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application |
| MIL C 24643 : A | CABLES AND CORDS ELECTRIC, LOW SMOKE FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
| ASTM F 2249 : 2003 | Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment |
| ASTM B 170 : 1999 : R2010 | Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
| ASTM B 355 : 2011 | Standard Specification for Nickel-Coated Soft or Annealed Copper Wire |
| ASTM B 728 : 1984 | Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors (Withdrawn 1988) |
| MIL-DTL-915 Revision G:2002 | Cable, Electrical, for Shipboard Use, General Specification for |
| MIL-B-19231 Revision A:1972 | BAR, COPPER, SILVER BEARING (FOR COMMUTATORS) |
| ASTM A 947M : 2016 : REDLINE | Standard Specification for Textured Stainless Steel Sheet [Metric] |
| ASTM F 468M : 2006 : EDT 1 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric] |
| ASTM B 447 : 2012 : REV A : REDLINE | Standard Specification for Welded Copper Tube |
| ASTM B 973:2010 | Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application |
| ASTM B 624 : 2007 : R2012 | Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application |
| ASTM B 452 : 2009 | Standard Specification for Copper-Clad Steel Wire for Electronic Application |
| ASTM B 399/B399M : 2004 : R2010 | Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors |
| SAE AMS 4500 : 2007 | COPPER, SHEET, STRIP, AND PLATE, SOFT ANNEALED |
| ASTM B 170 : 1999 : R2010 : EDT 1 | Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
| ASTM B 399/B399M : 2004 : R2015 | Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors |
| ASTM B 624 : 2007 : R2017 | Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application |
| ASTM B 248 : 2017 : REDLINE | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 75M : 1999 | Standard Specification for Seamless Copper Tube [Metric] |
| ASTM B 8 : 2011 | Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft |
| ASTM A 111 : 1999 : REV A : R2004 : EDT 1 | Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire |
| ASTM B 901 : 2004 : R2015 | Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction |
| ASTM B 398M : 1997 | Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes [Metric] (Withdrawn 1999) |
| ASTM B 976 : 2011 | Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR) |
| ASTM B 47 : 1995 : REV A : R2012 | Standard Specification for Copper Trolley Wire |
| NASA KSC SPEC E 0031 : 2008 | CABLES, ELECTRICAL, SPECIFICATION FOR |
| NASA KSC SPEC E 0024 : 2008 | CABLE, ELECTRICAL, SHIELDED, JACKETED, FOR HARNESS ASSEMBLIES, GENERAL SPECIFICATION FOR |
| ASTM B 465 : 2016 : REDLINE | Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 451 : 1993 | Specification for Copper Foil, Strip, and Sheet for Printed Circuits and Carrier Tapes (Withdrawn 1998) |
| ASTM B 559 : 2012 | Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application |
| ASTM B 706 : 2000 : R2006 | Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube |
| ASTM B 75 : 2002 | Standard Specification for Seamless Copper Tube |
| DOD HDBK 270 : 0 | METALLIC MATERIALS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC) |
| BS EN ISO 15551-1:2015 | Petroleum and natural gas industries. Drilling and production equipment Electric submersible pump systems for artificial lift |
| ASTM B 230/B230M : 2007 | Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes |
| ASTM B 48 : 2000 : R2016 | Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors |
| SCTE 74 : 2011 | SPECIFICATION FOR BRAIDED 75 OHM FLEXIBLE RF COAXIAL DROP CABLE |
| MIL-HDBK-270 Revision A:1991 | METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC) |
| ASTM B 286 : 2007 : R2012 | Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment |
| ASTM B 173 : 2017 : REDLINE | Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors |
| ASTM B 189 : 2005 : R2010 | Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes |
| ASTM E 345 : 2016 : REDLINE | Standard Test Methods of Tension Testing of Metallic Foil |
| ASTM B 972 : 2010 | Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application |
| ASTM B 116 : 1995 : R2007 | Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage |
| ASTM A 111 : 1999 : REV A : R2014 | Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire |
| ASTM B 498/B498M : 2008 : R2016 | Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors |
| ASTM B 501 : 2010 : R2015 | Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application |
| ASTM B 314 : 1990 | Specification for Aluminum 1350 Wire for Communication Cable (Withdrawn 1994) |
| SCTE 100 : 2010 | SPECIFICATION FOR 75 OHM SMOOTH ALUMINUM SUBSCRIBER ACCESS CABLE |
| ASTM B 227 : 2015 : REDLINE | Standard Specification for Hard-Drawn Copper-Clad Steel Wire |
| ASTM A 111 : 1999 : REV A | Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire |
| ASTM B 355 : 2011 : R2016 | Standard Specification for Nickel-Coated Soft or Annealed Copper Wire |
| MIL-S-22215 Revision A:1968 | SILVER-COPPER-CADMIUM-NICKEL-ALLOY |
| ASTM B 233 : 1997 : R2003 : EDT 1 | Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes |
| 13/30217541 DC : 0 | BS EN ISO 15551-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT |
| SAE J 1678 : 2015 | LOW VOLTAGE ULTRA THIN WALL PRIMARY CABLE |
| ASTM F 1883 : 2003 | Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units |
| MIL C 24640 : A | CABLE, LIGHT WEIGHT, ELECTRIC, LOW SMOKE, FOR SHIPBOARD USE GENERAL SPECIFICATION FOR |
| ASTM B 249M : 1994 | SPECIFICATION FOR GENERAL REQUIREMENTS FOR WROUGHT COPPER AND COPPER ALLOY ROD, BAR, SHAPES AND FORGINGS (METRIC) |
| QQ-W-343 Revision G:1997 | WIRE, ELECTRICAL, COPPER (UNINSULATED) |
| ASTM B 901 : 2004 | Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction |
| ASTM B 233 : 1997 : R2007 | Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes |
| ASTM B 115 : 2010 : R2016 | Standard Specification for Electrolytic Copper Cathode |
| ASTM B 49 : 2017 : REDLINE | Standard Specification for Copper Rod for Electrical Purposes |
| ASTM B 888/B888M : 2017 : REDLINE | Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts |
| ASTM B 971 : 2010 : R2014 | Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application |
| ASTM B 941 : 2016 : REDLINE | Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes |
| IPC AM 372 : 1978 | ELECTROLESS COPPER FILM FOR ADDITIVE PRINTED BOARDS, |
| ASTM B 609/B609M : 2012 | Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
| SAE AMS 4011 : 2014 | ALUMINUM, FOIL AND LIGHT GAGE SHEET, 99.45 AL (1145-0) ANNEALED |
| ASTM F 1883 : 2003 : R2013 | Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units |
| I.S. EN ISO 15551-1:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT (ISO 15551-1:2015) |
| ASTM B 747 : 2015 : REDLINE | Standard Specification for Copper-Zirconium Alloy Sheet and Strip |
| ASTM B 324 : 2001 : R2016 | Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes |
| ASTM F 2249 : 2003 : R2015 | Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment |
| ASTM B 609/B609M : 2012 : EDT 1 | Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
| ASTM B 324 : 2001 : R2012 | Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes |
| ISO 15551-1:2015 | Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift |
| 09/30204364 DC : 0 | BS EN 6104 - AEROSPACE SERIES - RIVETS, SOLID, IN ALUMINIUM OR ALUMINIUM ALLOY - INCH SERIES - TECHNICAL SPECIFICATION |
| EN ISO 15551-1:2015 | Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2015) |
| ASTM B 189 : 2005 | Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes |
| ASTM B 246 : 2015 : REDLINE | Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes |
| ASTM B 75 : 2002 : R2010 | Standard Specification for Seamless Copper Tube |
| ASTM B 286 : 2007 : R2017 | Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment |
| IEEE 515-2011 | IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications |
| ASTM B 231/B231M : 2016 : REDLINE | Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors |
| ASTM B 399/B399M : 2004 | Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors |
| ASTM B 324:2001 | Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes |
| ASTM B 105 : 2005 | Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors |
| ASTM B 502/B502M : 2010 : R2017 | Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors |
| MIL-C-19311 Revision B:1973 | COPPER CHROMIUM ALLOY FORGINGS, WROUGHT ROD, BAR AND STRIP (COPPER ALLOY NUMBERS 182, 184, AND 185) |
| ASTM B 801 : 2018 : REDLINE | Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation |
| ASTM B 248M : 2017 : REDLINE | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric) |
| ASTM B 250/B250M : 2016 : REDLINE | Standard Specification for General Requirements for Wrought Copper Alloy Wire |
| SCTE 117 : 2010 | SPECIFICATION FOR BRAIDED 75 OHMS, MINI-SERIES BROADBAND COAXIAL CABLE |
| IEEE 515.1-2012 | IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications |
| SCTE 244 : 2018 | SPECIFICATION FOR BRAIDED 75 OHMS, MICRO-SERIES QUAD SHIELD COAXIAL CABLE FOR CONNECTIVITY AND DENSE CCAP/EDGE QAM APPLICATIONS |
| ASTM B 566 : 2004 : REV A | Standard Specification for Copper-Clad Aluminum Wire |
| ASTM B 105 : 2005 : R2012 | Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors |
| ASTM B 63 : 2007 : R2018 | Standard Test Method for Resistivity of Metallically Conducting Resistance and<brk/> Contact Materials |
| ASTM B 452 : 2009 : R2015 | Standard Specification for Copper-Clad Steel Wire for Electronic Application |
| ASTM B 910/B910M : 2007 | Standard Specification for Annealed Copper-Clad Steel Wire |
| SAE AMS 7510C:2006(S2017) | Magnets, Rare-Earth/Cobalt, Permanent Powder-Metallurgy Product |
| ASTM B 250M : 1995 | Standard Specification for General Requirements for Wrought Copper Alloy Wire [Metric] (Withdrawn 2001) |
| ASTM B 115 : 2010 | Standard Specification for Electrolytic Copper Cathode |
| ASTM B 803/B803M : 2008 : R2016 | Standard Specification for High-Strength Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
| ASTM B 976 : 2011 : R2015 | Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR) |
| ASTM B 559 : 2012 : R2017 | Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application |
| ASTM B 706 : 2000 | Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube |
| ASTM B 624 : 2007 | Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application |
| ASTM B 233 : 1997 : R2016 | Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes |
| ASTM B 116 : 1995 : R2001 | Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage |
| ASTM B 116 : 1995 : R2012 | Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage |
| ASTM B 63 : 2007 | Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials |
| ASTM B 803/B803M : 2008 : EDT 1 | Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
| ASTM B 233 : 1997 | Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes |
| ASTM B 910/B910M : 2007 : R2013 | Standard Specification for Annealed Copper-Clad Steel Wire |
| ASTM B 172 : 2017 : REDLINE | Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors |
| 10/30233643 DC : 0 | BS EN 6104 - AEROSPACE SERIES - RIVETS, SOLID, IN ALUMINIUM OR ALUMINIUM ALLOY - INCH SERIES - TECHNICAL SPECIFICATION |
| ASTM B 958 : 2008 | Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc<span class='unicode'>–</span>5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
| ASTM B 957 : 2008 | Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors |
| ASTM A 111 : 1999 : REV A | Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire |
| ASTM B 415 : 2016 : REDLINE | Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire |
US$75.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.